Topic: Installing/formatting A New Hd Through Ftp W/ Evox (Read 492 times)

slave1 · « **Reply #30 on:** July 25, 2003, 07:59:00 PM »

Ok I did this and it seemed to work, but now how do I lock the drive so I can turn the modchip off to go on xboxlive? Thanks.

gainpresence · « **Reply #31 on:** July 26, 2003, 11:28:00 AM »

QUOTE (slave1 @ Jul 25 2003, 10:59 PM)

Ok I did this and it seemed to work, but now how do I lock the drive so I can turn the modchip off to go on xboxlive? Thanks.

Get ConfigMagic, load it up on the 'box, and select "Lock Drive" from the menu.

slave1 · « **Reply #32 on:** July 26, 2003, 04:56:00 PM »

Thanks, I figured it out. Configmagic locked the drive, but it seems it gave a new hd password different than the one I backed up of my original xbox hd. I guess it's all ok to go on LIVE then? My MS dash works and everything.

kray4737 · « **Reply #33 on:** August 04, 2003, 09:43:00 AM »

Cheule, when I followed your Method and I Inserted the evox cd I always ended up getting an error on the top left hand corner. Before I followed youre Method I was using Xantiums, on his guide the evox cd had an ini and the xbe and a backup directory. When I put that cd In The screen would be cut diagnolly with a error on the corner. Is something wrong with the actual hdd or the cd. I Burned the cd using nero and I made an iso using SimpleX ISO.

Have a Xecuter 4977 Bios and a WD 80G HDD. Also i think I have a v1 xbox

Schmoov · « **Reply #34 on:** August 05, 2003, 01:48:00 AM »

Can I do this with an Enigmah Chip somehow?

thebuffman · « **Reply #35 on:** August 13, 2003, 07:41:00 PM »

Hey guys help me out a bit. I followed the instructions to format the 1, 2 & 6 partitions. My Xbox is functioning perfectly. Do I need to be concerned about the other partitions that I never formatted?

thebuffman · « **Reply #36 on:** August 14, 2003, 08:23:00 AM »

Scratch my old post. I ran into some problems while playing Jedi KOTR. I formatted the rest of the drives (3-5) and that fixed some of my issues. Now all of my drives display some type of space usage. Before only 1,2, 6 displayed space usage with the others showing 0.

Baotchi · « **Reply #37 on:** August 19, 2003, 12:50:00 PM »

Hi there

just FYI about this tutorial :

I did it and it works fine fine fine, exect for ...

QUOTE

Your drive is now formatted and ready to use. Partitions X:, Y:, and Z: will be created automagically.

I had to manually format partition X Y and Z. They did not create automatically like it was supposed to. Anyone else had an issue with that?

Simon

SlickVicJr · « **Reply #38 on:** August 21, 2003, 04:54:00 PM »

newb question: this method will only work with modded Xboxs right?

stopthepain2 · « **Reply #39 on:** August 24, 2003, 12:48:00 AM »

I seem to be having a problem with this. I have a 120gb drive, F is only formatting to 32gb. Has anyone else experienced anything like this?

the_ladie's_logarithm · « **Reply #40 on:** August 24, 2003, 01:58:00 PM »

Re: newb question. Yup, this will only work with modded (or onboard flashed) xboxes.

I've got a bit of a newb question myself: is there /any/ reason for doing all the other crap (installing xbox in pc, using tools to format it, backing up old hdd, etc), or am I just wasting my time? Is this method just as good?

snively · « **Reply #41 on:** August 30, 2003, 03:18:00 PM »

about the first post in this thread. he says burn the evox dash to a cd-rw. does he mean burn the evoxdash.xbe or can i burn the slayers auto installer and use that also?

the_gambit · « **Reply #42 on:** September 03, 2003, 02:53:00 PM »

Cheule , I have a question... I'm trying to install a 120gb Seagate 7200rpm, and I did everything according to the guide, but when I insert the Evox cd-rw into the drive for some reason it doesn't boot. The cd is burned correctly. I know this because if I put in my old drive I can run Evox off the cd, after going through my Evox and hitting: Launch DVD. Other cds won't run either. I know that in the guide you say to try booting the cd over and over again until it works... well I've been doing this for a long time (prob a couple of hours). Any help would be appreciated

Da Gambit

the_gambit · « **Reply #43 on:** September 03, 2003, 03:18:00 PM »

did u change evoxdash.xbe to default.xbe???

Spency234 · « **Reply #44 on:** September 10, 2003, 07:49:00 AM »

Hey, followed the instructions, and it let me transfer files to E and F... but no C, fails every time??

Author Topic: Installing/formatting A New Hd Through Ftp W/ Evox (Read 492 times)