Topic: Installing/formatting A New Hd Through Ftp W/ Evox (Read 492 times)

jfullam · « **on:** January 27, 2004, 01:25:00 AM »

PLEASE HELP!!!

I am having the same issue as many people have mentioned on this thread... some seem like they solved it, but did not post what they did to solve..

If I pop in my Slayers Evox CD and then start FTP (FlashFXP) from my PC to XBOX I can access the XBOX and "see" all my drives C, D, E, F, G. X, Y, Z...

All directories appear empty (except D of course)... I CAN FTP from D (DVD drive) to my PC.
I CANNOT FTP anything from my PC to the XBOX (File Transfer Failed message).

I have tried formatting using Slayers as well as Formatting all 6 drives using the Raw commands, FTP echos that each drive is formatted, and I still cannot FTP to the XBOX...

My XBOX was working fine for 3 months, but then somehow got "toasted" when I rented an Oddworld game from Blockbuster, put it in my DVD drive and rebooted the XBOX... I never had any issues FTP'ing to the XBOX before, it does seems to see the drives on the XBOX, but FTP transfers to the XBOX fail... I have used this Slayer installer CD very successfully the first time I orignally loaded my XBOX 3 months ago...I did not have a single problem, it worked great... so I am thinking that either is something screwy with the drive itslef or maybe the bios?

If I could only FTP to the XBOX, I can get the xbox working again...

Please, anyone who has a clue, I would greatly appreciate it...

Daggerx · « **Reply #1 on:** April 26, 2005, 09:27:00 AM »

what is the command to lock hdd using evox (raw)

can u post that here...please...

Cheule · « **Reply #2 on:** May 30, 2003, 12:01:00 PM »

Here is a guide I wrote for all the people that were asking how to get a new HD in their Xbox, and were complaining about Slayer's AutoInstaller. I've heard of a lot of problems when using Slayer's, and if you follow this guide, you shouldn't have a single issue!

---

A lot of people have had problems installing new HDs. Making a custom evox.ini can be confusing, and finding a Xbox HD format app can be hard. This tutorial shows you how to format a brand new HD with nothing more than a stock version of Evolution-X Dashboard on a CDRW or DVD-R.

First, back up all your files from your C: and E: ( and F: if you had one) drives to your computer.

Install your new HD into the Xbox. It does NOT need to be formatted or prepared in any way. Just throw it in there. Note that most HDs ship with the jumper set to CS (cable select) this works most of the time, you may need to set it to MA (Master).

Burn the EvoX dashboard to a CDRW or DVD-R (no CDRs). I suggest using the pre-made ISO Dummy images that can be found on the net. Dummy images are simply ISO images with 500+ MB of "dummy" data to force the EvoX data to the outer rim of the CDRW where it can be read easier. You might try doing a google search for evolutionx_beta_v1.8.3285-Dummy-Static.rar, or look around IRC.

Launch Evolution-X Dashboard off CDRW/DVD-R. If you drive doesn't read it the first time, don't give up. Turn the Xbox off completely while the disk is still in it, and then back on. If it doesn't boot again, keep trying. It may take a dozen or more tries.

With Evox Dash booted off CDRW/DVD-R, connect through FlashFXP (Windows) or Transmit (MacOS).

You will now need to send "Raw FTP Commands" with your FTP client. You may have to hunt through the pull down menus for an option called "send raw FTP command." Send the following "Raw FTP Command" with your FTP client:

CODE

Formatpath \Device\Harddisk0\Partition1

The FTP app will echo a hard drive key (display a long number in the log window [FlashFXP] or a dialog box [Transmit]). Use that key for the next command.

CODE

FormatDrive 'the number' (no quotes)

Do the same as above for the next few raw commands:

CODE

   Formatpath \Device\Harddisk0\Partition2
   FormatDrive 'the number'
   Formatpath \Device\Harddisk0\Partition6
   FormatDrive 'the number'

Your drive is now formatted and ready to use. Partitions X:, Y:, and Z: will be created automagically.

All you need to do now, is get Evox on the HD. FTP the "default.xbe" from your D: to your computer. Then rename the file to "evoxdash.xbe" and FTP it back to the C:. Then copy the "evox.ini" from the D: to your computer and then back to the C:. Pull your CDRW/DVD-R out, and reboot.

Then you can FTP all your contents of your backed up drive from your computer to the Xbox.

Cheers, Cheule

Edit: fixed backslashes. -gain

This post has been edited by Cheule: Jun 13 2003, 04:48 AM

gainpresence · « **Reply #3 on:** May 30, 2003, 11:56:00 AM »

Thanks for making this info easily available to us lazy types.

HaZoRdUs · « **Reply #4 on:** June 01, 2003, 12:27:00 AM »

Im having a problem Chuel... I cant ftp anyting on to C drive!

Cheule · « **Reply #5 on:** June 01, 2003, 09:56:00 AM »

Does this mean that you cannot connect via FTP at all? or that you see your files on your C: drive, and somehow cannot get them off?

If you could tell me exactly the steps you've taken, I can better help you.

carla · « **Reply #6 on:** June 02, 2003, 05:40:00 AM »

I am havin problem getting anything to go back onto the c: drive of my new hd just installed. I followed your guide, it says formated after each command, but when i try to put any file onto c: drive i get failed transfer.

any ideas on how to fix please

carla · « **Reply #7 on:** June 02, 2003, 06:37:00 AM »

Nevermind got it.

grarged · « **Reply #8 on:** June 02, 2003, 06:35:00 PM »

Hey...having the same problem with FTP onto the formatted drives...I followed all the instructions and FXP says drive formatted after each but I can't FTP files onto the C or E drives! Help! Cheule or any1!

CaliSurfer008 · « **Reply #9 on:** June 02, 2003, 07:03:00 PM »

QUOTE (gainpresence @ May 30 2003, 12:56 PM)

Thanks for making this info easily available to us lazy types.

haha...agreed!

grarged · « **Reply #10 on:** June 03, 2003, 08:02:00 AM »

So I figured it out...thanks to another tutorial. When I followed Chuele's method I wasn't able to transfer anything. So I formatted all of the drives instead of just three and everything after worked fine. Thnx to Sandman and his Tutorial.
Pc

Cheule · « **Reply #11 on:** June 04, 2003, 10:33:00 AM »

QUOTE (grarged @ Jun 3 2003, 05:02 PM)

When I followed Chuele's method I wasn't able to transfer anything. So I formatted all of the drives instead of just three and everything after worked fine.

So you got the key and formatted for drives 1 through 6? Maybe I should add an addendum. Oddly enough i just stumbled accross this same problem the other day, but it didn't happen to me before.

Cheule · « **Reply #12 on:** June 04, 2003, 12:31:00 PM »

A HA! I know what is causing problems! This webboard has removed all the backslashes from my FTP commands. I just noticed! Let me edit my original post!

gainpresence · « **Reply #13 on:** June 04, 2003, 12:44:00 PM »

If you type double backslashes, it shows 1.

1 backslash:
2 backslashes: \
3 backslashes: \
4 backslashes: \\

etc..

This post has been edited by gainpresence: Jun 4 2003, 07:44 PM

jomo · « **Reply #14 on:** June 08, 2003, 09:27:00 PM »

Where do I find "Raw FTP Commands"?

Author Topic: Installing/formatting A New Hd Through Ftp W/ Evox (Read 492 times)