xboxscene.org forums

Author Topic: Do I Need The Ps3key Inserted At All Times  (Read 109 times)

xboxhaxorz

  • Archived User
  • Hero Member
  • *
  • Posts: 573
Do I Need The Ps3key Inserted At All Times
« on: October 21, 2010, 10:22:00 PM »
I have jtagged several 360s using a single xecuter nand x. I was wondering if the same applies to the ps3 or do i have to leave the usb key inside it.
Logged

breathofice

  • Archived User
  • Jr. Member
  • *
  • Posts: 60
Do I Need The Ps3key Inserted At All Times
« Reply #1 on: October 22, 2010, 06:48:00 AM »
you must have it inserted every time you start the PS3 up to use any hombrew. After it has completely booted you can remove the usb device but you will have to re-insert it next time you start the ps3 and got through the process every time.

You must have firmware 3.41 installed. You have to cut the power before and reconnect it before attempting to but it in this manner. With the Fat ps3 there is a power switch on the back. With the PS3 slim there is not so you must unplug the power cable or find another way to reset the power. Upon booting you must immediate hit eject. The system will boot into the debug mode assuming everything is setup properly on the usb device
Logged

q-live

  • Archived User
  • Newbie
  • *
  • Posts: 40
Do I Need The Ps3key Inserted At All Times
« Reply #2 on: October 22, 2010, 10:55:00 AM »
QUOTE(xboxhaxorz @ Oct 22 2010, 04:22 AM) *

I have jtagged several 360s using a single xecuter nand x. I was wondering if the same applies to the ps3 or do i have to leave the usb key inside it.



can you tell me where to get the software and instructions to make this key with my usb?
Logged

xboxhaxorz

  • Archived User
  • Hero Member
  • *
  • Posts: 573
Do I Need The Ps3key Inserted At All Times
« Reply #3 on: October 22, 2010, 02:37:00 PM »
QUOTE(breathofice @ Oct 22 2010, 08:48 AM) View Post

you must have it inserted every time you start the PS3 up to use any hombrew. After it has completely booted you can remove the usb device but you will have to re-insert it next time you start the ps3 and got through the process every time.

You must have firmware 3.41 installed. You have to cut the power before and reconnect it before attempting to but it in this manner. With the Fat ps3 there is a power switch on the back. With the PS3 slim there is not so you must unplug the power cable or find another way to reset the power. Upon booting you must immediate hit eject. The system will boot into the debug mode assuming everything is setup properly on the usb device


so i assume with the ti 83 or other usb options, such as phone mp3 players we simply load the hack and dont need to keep these devices plugged in?


QUOTE(q-live @ Oct 22 2010, 12:55 PM) View Post

can you tell me where to get the software and instructions to make this key with my usb?

on this forum somewhere
Logged

breathofice

  • Archived User
  • Jr. Member
  • *
  • Posts: 60
Do I Need The Ps3key Inserted At All Times
« Reply #4 on: October 22, 2010, 07:42:00 PM »
no... Whatever Ps3 device you use as a Ps3 hack you have to hook it up every time you boot your ps3. Once its booted into that mode you can unplug it but it has to be inserted every time you start the ps3. Yea the Calculators and cellphones work but this isnt very convienient.
Logged

xboxhaxorz

  • Archived User
  • Hero Member
  • *
  • Posts: 573
Do I Need The Ps3key Inserted At All Times
« Reply #5 on: February 02, 2020, 10:37:00 PM »
ahhhh gotcha now. definitely so pretty much the usb device is acting as a mod chip.

hmm ya whoever invented the cell phone thing is umm odd. im really not going to use my $200 phone as a boot device lol.

i guess now i just need to find a way to internalize the usb key so its not sticking out all the time
Logged