Print

[ddxcb]

it hurts me when people say jailbreak

[Looouky]

QUOTE(scourge_23 @ Sep 7 2010, 09:46 PM)

Hey guys, I'm wondering is this would work. It says it has a PIC controller but it doesn't say which one so I'm wondering if it would work to jailbreak the ps3. Thanks in advance.

that will work, just use the right file for xtal.

QUOTE(kain @ Sep 7 2010, 10:15 PM)

Will this one work for this hack? thanks.

http://www.modchipce...nd-flasher.html

that will probably work as well, anything that usb spi flasher will work as long as you use the right for xtal. You can always flash it back if doesn't .

and the device needs to be plugged into the ps3 at all times.

QUOTE(xboxhaxorz @ Sep 7 2010, 10:14 PM)

right now i have the nand x from team xecuter, i will probably just buy the spi flasher from XS Filter - 062508 - filtered.s to support them and that way i dont have to go flashing my programmer back and forth

i assume, we flash the ps3 and then remove the programmer similar to the jtag hack? or does it need to plugged in all the time?

i don't think the nand-x works for this, I am not sure what components it uses so I can't say for sure. Yes it has to be plugged in to the usb port at all times.

[warbeast]

this gives me another reason to swap from lpt to usb for 360 jtag  

i looked up the parts on maplins and farnell the flasher would cost about £10 and the programer about £5 but then found a shop selling pre built 360 spi flashers with bootloader for £16 so just ordered one i just hope it has the 12MHZ resonator and PIC18F2455

[Looouky]

doesn't need 12, there are files for 4, 8, 12, 16 and 20

[atreyu187]

Are you serious this is the most awesome thing ever!!! My 360 is my PS3 modchip now I have been looking everywhere trying to get my hands on this and low and behold there was one sitting right next to my PS3 the whole time. Now I just remove my 360 HDD insert USB cable and BAM I am in business!! I will have to flash it back once I want to flash my 360 but how often does that happen twice a year? Man simply put funny, i can't wait show all my friends and show them my 360 is my PS3 mod.

[kain]

QUOTE(Looouky @ Sep 8 2010, 05:20 AM)

doesn't need 12, there are files for 4, 8, 12, 16 and 20

nice! where can you get the different hack files?

[Looouky]

QUOTE(scourge_23 @ Sep 7 2010, 09:46 PM)

Hey guys, I'm wondering is this would work. It says it has a PIC controller but it doesn't say which one so I'm wondering if it would work to jailbreak the ps3. Thanks in advance.

most of the pic development happens on a mexican site so you might want to check it out, since I believe your primary language is spanish.

http://www.elotrolad...50_1479909_s460

[magicmmm]

Hello,

Could anybody please confirm whether the following would work

http://www.360nandflasher.com/


Thank you very much for your assistance:)

[Looouky]

QUOTE(kain @ Sep 7 2010, 11:22 PM)

nice! where can you get the different hack files?

found in the zip file of 1.2, i'll link it again for you. Here.

QUOTE(magicmmm @ Sep 7 2010, 11:30 PM)

Hello,

Could anybody please confirm whether the following would work

http://www.360nandflasher.com/
Thank you very much for your assistance:)

can't say for sure unless you tell me the mcu on it, but i think it is doubtful.

Just to let everyone know, the spi has to be built according to the following schematics. Most are made like this. I think nand-x and maximus are the exception. I could be wrong though, from there speed I have a hard time believing they are based on pic. Another thing to note is that those two products were commercially manufactured which means their code can not be change, unless xecuter and maximums built-in a means for the end user's to update the device, which is very unlikely.

[scourge_23]

QUOTE(Looouky @ Sep 8 2010, 06:26 AM)

most of the pic development happens on a mexican site so you might want to check it out, since I believe your primary language is spanish.

http://www.elotrolado.net/hilo_investigacion-psjailbreak-usando-un-microchip-18f2550_1479909_s460

Thanks for your response Looouky, I will give it a try and post results.

[sxcevo]

hello there. i am based in the UK and getting hold of teensy++ boards are imposible so just woundering if anyone knows a good supplier that offer the spi programmer that is compatable with the compiled hex files? there a few different xbox 360 programmers and i got a bit confused so i didnt want to buy something that isnt compatable.

thanks in adavance!

[ryaku]

Hi,

Someone tried with Xecuter Nand-X ?

Thanks

[spike4real]

Nand-X compatibility would be handy!  i have one of them to hand  

[sxcevo]

QUOTE(pure3d2 @ Sep 8 2010, 10:03 AM)

The xb0xexperts 360 nand flasher works for the jailbreak.  I've tested 4 units tonight.

Go to: hxxp://www.xbox-experts.com/index.php (change hxxp to http).

cool thanks for the reply they seem good, but i need it within the next few days due to going on holiday sunday. do you know any Uinted Kingdom retailers? cheers

[b3nnyb0y]

Hi I have a usb spi nand flasher & It doesnt have the pin header for putting into a bootloader mode, Like in the picture on the 1st page.

This is the usb spi nand flasher I have, It has the right pic chip PIC18f2455

http://cgi.ebay.co.u...e=STRK:MEWNX:IT

I have the software installed like it says but its not appearing in the drop down box after I install the driver. If someone knows how I am able to get it into bootloader mode I would be so gratefull.

Thank You