Topic: Ps2 Slim Scph79001 Controller Ports Not Working (Read 464 times)

gman060692 · « **on:** June 26, 2010, 03:56:00 PM »

I just got a ps2 slim yesterday for free because I was told it had a broken fan. The fan wires had just been pulled of the solder pads so easy fix. However once I was done that I booted it up to try it out. Everything was working perfectly except the console would not respond to any input from the controller on either port whether in the system menu or in game. The controller is receiving power because the analog light will light up when the analog button is pressed. Also I know the controller works cause it's fine on my ps1.

any ideas?

deilzfcjk · « **Reply #1 on:** June 26, 2010, 04:13:00 PM »

check the controller port connection. If there is rust or dust and blow it out with compressed air.

then if above fails, try checking the fuses.

The port on a slim should have a fuse. If you were to look for a blown fuse. They usually are signified by PS"number". The "number" is a number. Just use a continuity meter to see if there is a beep. If not then that's blown.

The ps2 rarely has controller port problems. I only had two or three in my days of modding ps2. I've done over 350+ over the years. The controller port were from the fat ps2 too. They can be replaced. But on a slim they can't be replaced. I doubt that sony would mess up on a simple controller port for the slims. The slims are their final design. They must of had it down pat by like the 23+ revisions. hehe.

This post has been edited by deilzfcjk: Jun 26 2010, 11:15 PM

gman060692 · « **Reply #2 on:** June 26, 2010, 05:08:00 PM »

turns out it was dirty controller ports. Compressed air didn't work, however after cleaning the ports with rubbing alcohol worked.
Thanks for the advice.

deilzfcjk · « **Reply #3 on:** June 28, 2010, 10:10:00 PM »

No problem. Your welcome.

jorosh29 · « **Reply #4 on:** July 21, 2010, 07:06:00 PM »

Just clean the controller port,and if they have a dust,just blow it............................

make money online easily

f34rther34pr · « **Reply #5 on:** August 22, 2010, 03:47:00 PM »

my controller ports are broken too and was wonderin if i could use this instead.

Nicole53 · « **Reply #6 on:** October 01, 2010, 08:21:00 PM »

Hello!
The best thing you can do is to see an electrician to help you about your problem...I have no idea about this...
Good day.............

how to treat depression

This post has been edited by Nicole53: Oct 2 2010, 03:22 AM

Nicole53 · « **Reply #7 on:** October 11, 2010, 11:12:00 PM »

Hello!

Please join me here,i really need help too...
how to treat depression
God bless...

This post has been edited by Nicole53: Oct 12 2010, 06:12 AM

MrJames2785 · « **Reply #8 on:** May 06, 2011, 01:41:00 AM »

I think you have a broken controller port connection. You should check it out to get it fix.

affiliate marketing

Author Topic: Ps2 Slim Scph79001 Controller Ports Not Working (Read 464 times)