Topic: Connecting Viper Directly To The Pc? (Read 83 times)

el_diablo · « **on:** January 12, 2005, 09:30:00 PM »

sorry for saying thingy so much

mickcris · « **Reply #1 on:** January 12, 2005, 11:20:00 PM »

i took off the standoffs and the shielding. you just have to make sure you line it up correctly.

el_diablo · « **Reply #2 on:** January 13, 2005, 04:08:00 AM »

photobucket is down...

Min · « **Reply #3 on:** January 13, 2005, 11:10:00 AM »

Ok thanks. One more thing , when playing a ntsc game on a pal cube , does it output in ntsc , pal60 or pal50. Looked about , but can't find answer. Some people say it does pal 60 , so full screen , full speed. Others say does pal 50 , so black bars and slower. Which is it , I noticed the freeloader faqs so you need 60hz compatible tv , but aint sure if thats the freeloader forceing pal60.

brandogg · « **Reply #4 on:** January 13, 2005, 05:04:00 PM »

I took out the screws from the connector, glued on the outer shield (super glue), then put the screws on the other side, so it plugs right into the parallel port.

Min · « **Reply #5 on:** January 14, 2005, 07:22:00 PM »

Author Topic: Connecting Viper Directly To The Pc? (Read 83 times)