Topic: Problems After Ram Upgrade (Read 59 times)

glitch58 · « **on:** February 13, 2006, 07:50:00 PM »

Hi,
i tried to do an ram upgrade on my xbox myself and failed, and it caused my xbox to frag. i checked it over and over an could see a problem and then just gave up one the upgrade. So i removed the chips very carefully and the xbox still frags, i checked all the little solder points for each chip and they look ok, a little rough but non are touching that i can see. i really dont know what i could try next, besides maybe using a desolder braid to remove all the solder that is one the points for each chip, but i wasnt too sure if it needed to be there. any help would be great thanks

JonTheChron · « **Reply #1 on:** February 13, 2006, 09:08:00 PM »

well if you want to remove them make sure u remove them all, use solder flux and a desoldering braid to do the job, make sure u have no cross links from solder point to solder point, hope u were wearing an anti-static bracelt or something, where did u get the chips from?

glitch58 · « **Reply #2 on:** February 13, 2006, 11:30:00 PM »

Hey thanks for the reply, i get all the chips off already and it still frags i wa wondering if i shoudl use a desolder braid to remove the little bits of solder on each point, i got the chips off a guy in the bst but im pretty sure he got them from someone else, thanks

JonTheChron · « **Reply #3 on:** February 13, 2006, 11:37:00 PM »

put flux on the little solder points and use a braid, putting flux will help alot,

Author Topic: Problems After Ram Upgrade (Read 59 times)