Print

[beltrachi]

It is not a question, I only explain my experience to the comunity.

Last week a lightning fell near home and damaged the vcr and the xbox.

The console has no warranty yet, and i can't use the house insurance 'cause it is softmoded and has an external dvd-rom, so it has a hole on the top to let out the power and ide buses.

So I decided to try to repair the psu. My psu is a Delta Electronics Inc. DPSN-96AP-1.
when I saw at the back of the psu card, i could see what happened. The lightning left marks where it passed.

(IMG:http://usuarios.lycos.es/ptcfotos/xbox/imagen1.jpg)

The damaged parts I could see at first look were 2 of a group of four resistances which had a part burned. And the tester confirmed that. But with the tester i coud see that the fuse (obbiously! (IMG:style_emoticons/default/biggrin.gif)) was fused.

(IMG:http://usuarios.lycos.es/ptcfotos/xbox/imagen2.JPG)

Parts damaged and changed:

      - 2 resistances of 1MOhm
      - 1 fuse (T3.15A 250v)

Lukly no other part seems to be damaged, although the lightning trace reaches the diode bridge (IMG:style_emoticons/default/tongue.gif)

It works. I let the console powered on for six hours, and nothing strange happened.

I hope it can be helpfull for someone 'cause i didn't find a lot of help on the net.
If someone don't want to repair it, i found a web to buy a new one: lik-sang.
And it's not the only place. Google can help.

This post has been edited by xboxgamer733: Apr 6 2007, 06:49 AM

[sick_mate_xbox]

thanks for that, i got an xbox that had a dead PSU after a lighting strike (that was what i was told) so maybe in the near future i will try out your tutorial and let you know how it goes! thanks!

[karlwmiller]

hi just thaught id say that my friend had the same happento his xbox, bugger aint it

[FallsInc]

and thats why i invest in power filters. i've spent about 100 dollars on 3 of them, and that is a very very small price to pay to protect my nearly $10,000 of computer and electronics equipment. my audio system alone is worth 1300, computer is around 2700 not including moniter, and other shit too.

[djmart6914]

Insted of doing all of that, why not purchase a good quality UPS or Surge Protector? Good tutorial though, it most likely will never happen to me. Next question is, what exactly did you have your xbox plugged into?

[beltrachi]

QUOTE(djmart6914 @ Dec 5 2005, 02:31 PM)

Insted of doing all of that, why not purchase a good quality UPS or Surge Protector? Good tutorial though, it most likely will never happen to me. Next question is, what exactly did you have your xbox plugged into?

You are right. I didn't have a surge protector but i didn't have any problem before. Lightnings are very rare here and most people don't use it. My house insurance would have paid it if it wouldn't be modded. The video casette recorder died too and they paid it.

Anyway, i've bought a filter.

[djmart6914]

For my computer,monitor, and cable modem, I have them protected with a APC UPS. Which will cover up to $50,000 if the UPS should fail.

[kingdead57]

Hello.  I'm pretty sure after reading through those posts taht my power supply's fuse blew also but not by lightning, why I'm not sure. Though does it matter which kind of parts you would use to repair your power supply? Mine is a Delta Electronics DPSN-96BP.  Does that matter at all?  But mine blew at what looks like the AC current as you put.  Could you help me out, I haven't played my 220 gb soft mod in 7 months, I'm dying here lol.  

(IMG:http://i24.photobucket.com/albums/c21/kingdead57/Xbox.jpg)

[beltrachi]

Kingdead57, sorry for the time past.

First, I'll try to response:

QUOTE

does it matter which kind of parts you would use to repair your power supply?

I don't know if I certainly understand it, but if you mean if you can pick any component with near specs, no. I don't recommend it. If you change a resistance of 1Mohm with a tolerance of 2% with one of 10% it can be bad.

Try to find a fuse with the same specs as the one in your board.

I don't understand how you deduce that it is the PSU.

And I think that there is something very strange on your pic.
(IMG:http://usuarios.lycos.es/ptcfotos/xbox/xbox2.jpg)
What was 4 resistances, in your one, seems like them are short circuited. I supose that it's not been made by you, is it?

To be sure that is the fuse what causes the fail, get a tester. If is it, buy one with the same specs.

Good luck.

You posted more than 2 weeks ago, so I supose that you got your machine repaired anyway.

[FallsInc]

7 monthes?

damn... just buy a new power supply... its like 20 bucks...

[Mr_t883]

hey guys,

My house recently had some voltage surges, I unplugged everything at the time but it was too late. From the reading I took the voltage across only dropped below 120 but I gues that may be enough to do damage. anyhow my delta dpsn-96DP looks in need of some love. I have a buddys old xbox  (with fried circuit board but good delta board)  however his Delta is a dpsn-96AP. I was just going to swap em over however my adapter to the ciruit board was two layers with 16 wires, while his is a single layer with 13 wires, so I can't even use my adapter plug on his board, I was going to  butt splice them together but which wires get combined?  not sure what I should do or can do.

If could get info on what those extra 3 wires are for a but splice and mickey mouse something there or simply try to repair my board. theres a couple things that look in need of replacement.

Just wondering what the pros think... let me know

I got pics of what I described but was unable to attach them, I guess you gotta have them on the net in order allow veiwing, if you want I email em to you.

Tyler

[raceboy404]

i have the same issue,
on the top, looka bout 1 inch from the black female port
see the two restiors- one is blown and coverd the other one.
  (i got a xbox from a friend- by my suprise^ and a samsung A DRIVE!!!

[Loser_guy]

Um, what's wrong when the xbox automicly comes on when it's plugged in?

[goleafsgo_21]

my ps broke should i get a new one or fix it

[Shadowed]

in regards to the comment about this pic
(IMG:http://usuarios.lycos.es/ptcfotos/xbox/xbox2.jpg)
i have an aussie DPSN-96BP-1 and unlike the earlier DPSN-96AP(-1) they use 2 resistors instead of 4 so there is no short circuit.

QUOTE

hey guys,

My house recently had some voltage surges, I unplugged everything at the time but it was too late. From the reading I took the voltage across only dropped below 120 but I gues that may be enough to do damage. anyhow my delta dpsn-96DP looks in need of some love. I have a buddys old xbox (with fried circuit board but good delta board) however his Delta is a dpsn-96AP. I was just going to swap em over however my adapter to the ciruit board was two layers with 16 wires, while his is a single layer with 13 wires, so I can't even use my adapter plug on his board, I was going to butt splice them together but which wires get combined? not sure what I should do or can do.

the DPSN-96AP is a 1.0-1.1 psu and the DPSN-96DP is a v1.6/1.6B psu it is incompatable as it uses different voltages as the earlier xbox's, just buy a replacement off ebay they're cheap enough

This post has been edited by Shadowed: Feb 15 2006, 04:03 PM