Topic: Anyone Know What I Should Check (Read 37 times)

Mark Morgan · « **on:** June 09, 2005, 05:32:00 AM »

I have dont a underglow mod it shorted and now my xbox frags

its a 1.3 and x3. the x3 is fine.

I have checked the mobo several time and redid the solder joints.
everything looks fine. any components recomended to check(my dad is an electrical engineer) and then replace?

cheers
Old post bout this

Code-Runner · « **Reply #1 on:** June 09, 2005, 07:32:00 AM »

All I can suggest is to do a LAD check on the LPC, look for abnormal solder on the contact points of the underside of the mobo and check the fuses. It could be minor or major but it is hard to tell when it is not in front of me.

Mark Morgan · « **Reply #2 on:** June 09, 2005, 05:21:00 PM »

i have checked all the solder joints and the chip comes on with two blue leds(normal).
i was thinking a fuse or a failed component but everything looks normal.

xbox-newbie-modder · « **Reply #3 on:** June 09, 2005, 05:30:00 PM »

I have the same problem with one of mine where i shorted the molex accidently when using a laptop drive converter.

I was talk maybe the nvidia chip was damaged but i really hope its just a fuse of some sort. I replaced the board in the end.

Author Topic: Anyone Know What I Should Check (Read 37 times)