xboxscene.org forums

Pages: 1 ... 5 6 [7]

Author Topic: XTest Inspection Tool  (Read 1013 times)

siliconart

  • Archived User
  • Newbie
  • *
  • Posts: 5
XTest Inspection Tool
« Reply #90 on: November 24, 2003, 01:00:00 PM »
i have 2.2.4 and yes i have tried both modes
Logged

ScorpioN^

  • Archived User
  • Newbie
  • *
  • Posts: 7
XTest Inspection Tool
« Reply #91 on: November 26, 2003, 07:23:00 AM »
smile.gif

too bad it is not working :/

so this is the newest... jmel2 told me to post this smile.gif

[19:16:56] X-Link configuration inspection begins..

[19:16:56] Attempting Socket Bindings..
[19:16:56] Attempting X-Link Data Stream Bind (34518 UDP)..
[19:16:56] Attempting X-Link Data Stream Bind (34518 UDP)..
[19:16:56] Attempting XBConnect Hosting Stream Bind (8602 UDP)..

[19:16:56] Attempting Port Loobpack Tests..
[19:16:56] 34518 -> OK (192.168.1.33)
[19:16:56] 34519 -> OK (192.168.1.33)
[19:16:56] 8602 -> OK (192.168.1.33)

[19:16:56] Initialising WinPCap control layer..

[19:16:56] Enumerating WinPCap NICs:
[19:16:56] SiS NIC SISNIC (MS's Packet Scheduler) - DeviceNPF_{078365C0-636F-49A1-9717-06428550D7AD}

[19:16:56] Checking IsGood status of NICs:
[19:16:56] SiS NIC SISNIC (MS's Packet Scheduler) =  1

[19:16:56] Attempting Promiscuous Control:
[19:16:56] SiS NIC SISNIC (MS's Packet Scheduler) - STARTED
[19:16:56] SiS NIC SISNIC (MS's Packet Scheduler) - STOPPED

[19:16:56] MAC Capturing:
[19:16:56] Listening 5 seconds on SiS NIC SISNIC (MS's Packet Scheduler)
[19:16:58] 0050F2907029->FFFFFFFFFFFF
[19:17:00] 0050F2907029->FFFFFFFFFFFF

[19:17:01] UPnP Enumeration (WAIT):
[19:17:02] XLink Data 34518 UDP 34518
[19:17:02] XLink Control 34519 UDP 34519

[19:17:05] XServer External Test:
[19:17:05] Sending request..
[19:17:05] Waiting 5 seconds for reply..
[19:17:05] XServer accepted connection..
[19:17:05] HTTP/1.1 200 OK
Connection: close

Server -> Sent 3 test packets to 62.197.180.5 - HTTP response was 62.197.180.5 , full was

[19:17:10] Tests complete... post in the forum if you need to.




Regards, ScorpioN^
Logged

siliconart

  • Archived User
  • Newbie
  • *
  • Posts: 5
XTest Inspection Tool
« Reply #92 on: November 27, 2003, 02:25:00 PM »
QUOTE (siliconart @ Nov 16 2003, 01:29 PM)
QUOTE (siliconart @ Nov 16 2003, 03:30 AM)
What about ME!!???

I Have a Dlink DI-624 Wirless Router... With my XBOX Hard Wired to it. Then This comp is also Hard Wired to it as well... and then I have my Laptop runninn Wireless card.

I have taken off WinCap 3.0 and put back on 2.3

also.. here are some screen shots of my Firewall and router settings...

Firewall
user posted image

Vsrever
user posted image

And here is the link to the Dlink site of my Router
Dlink DI/624 Router

I keep gettinnn the port forward thing.  sad.gif ?

[8:03:38 AM] X-Link configuration inspection begins..

[8:03:38 AM] Attempting Socket Bindings..
[8:03:38 AM] Attempting X-Link Data Stream Bind (34518 UDP)..
[8:03:38 AM] Attempting X-Link Data Stream Bind (34518 UDP)..
[8:03:38 AM] Attempting XBConnect Hosting Stream Bind (8602 UDP)..

[8:03:38 AM] Attempting Port Loobpack Tests..
[8:03:38 AM] 34518 -> OK (192.168.0.101)
[8:03:38 AM] 34519 -> OK (192.168.0.101)
[8:03:38 AM] 8602 -> OK (192.168.0.101)

[8:03:38 AM] Initialising WinPCap control layer..

[8:03:38 AM] Enumerating WinPCap NICs:
[8:03:38 AM] Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler) - DevicePacket_{66DCBA70-7A78-4994-9DC1-38994E89C2D3}
[8:03:38 AM] NdisWan Adapter (MS's Packet Scheduler) - DevicePacket_NdisWanIp

[8:03:38 AM] Checking IsGood status of NICs:
[8:03:38 AM] Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler) =  1
[8:03:38 AM] NdisWan Adapter (MS's Packet Scheduler) =  1

[8:03:38 AM] Attempting Promiscuous Control:
[8:03:38 AM] Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler) - STARTED
[8:03:38 AM] Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler) - STOPPED
[8:03:38 AM] NdisWan Adapter (MS's Packet Scheduler) - STARTED
[8:03:38 AM] NdisWan Adapter (MS's Packet Scheduler) - STOPPED

[8:03:38 AM] MAC Capturing:
[8:03:38 AM] Listening 5 seconds on Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler)
[8:03:43 AM] Listening 5 seconds on NdisWan Adapter (MS's Packet Scheduler)

[8:03:48 AM] UPnP Enumeration (WAIT):
[8:03:54 AM] XLink Control 34519 UDP 34519
[8:03:56 AM] XLink Data 34518 UDP 34518
[8:04:17 AM] UPnP Init failed.. skipping enumeration..

[8:04:17 AM] XServer External Test:
[8:04:17 AM] Sending request..
[8:04:17 AM] Waiting 5 seconds for reply..
[8:04:17 AM] XServer accepted connection..
[8:04:17 AM] Server -> Sent 3 test packets to 218.214.24.30 - HTTP response was 218.214.24.30 , full was

[8:04:22 AM] Tests complete... post in the forum if you need to.

bump  unsure.gif

CAN U PLEASE HELP ME ET XLINK WORKINN

THANK YOU!
Logged

flat235

  • Archived User
  • Sr. Member
  • *
  • Posts: 292
XTest Inspection Tool
« Reply #93 on: December 02, 2003, 05:30:00 AM »
That smells like a firewall problem - if 8602 is getting thru and the others arent..

TD
Logged

Bastaard

  • Archived User
  • Newbie
  • *
  • Posts: 3
XTest Inspection Tool
« Reply #94 on: December 02, 2003, 05:37:00 AM »
QUOTE (flat235 @ Dec 2 2003, 03:30 PM)
That smells like a firewall problem - if 8602 is getting thru and the others arent..

TD

you would think so, but the router im using doesnt know what a firewall is biggrin.gif and my firewall under XP is disabled, so i dont think that could be the case.
Logged

Bastaard

  • Archived User
  • Newbie
  • *
  • Posts: 3
XTest Inspection Tool
« Reply #95 on: December 02, 2003, 05:50:00 AM »
Also, i ran WUPS, a UDP port scanner from my friends machine on another internet connection and it states the ports are open. Now i'm really baffled.
Logged

Bastaard

  • Archived User
  • Newbie
  • *
  • Posts: 3
XTest Inspection Tool
« Reply #96 on: December 02, 2003, 05:58:00 AM »
well, i set my default server to my pc and it works, which simply baffles me even more. btw. xtest was enabled when i scanned the UDP ports from my friends house and it didnt react. When i ran it locally, it did. saying something was still up. Prolly routing to the wrong box or something, although it was set correctly in the NAT list.

Now i'm in..... FINALLY, although this messes up the settings i had for my unix box.

--- edit ----

i spoke too soon. Closed the application down, restarted it..... connection gone again, same output in xtest.... *sigh*
Logged

tizzo

  • Archived User
  • Newbie
  • *
  • Posts: 31
XTest Inspection Tool
« Reply #97 on: December 03, 2003, 08:27:00 AM »
wink.gif )
Logged

gui2212

  • Archived User
  • Newbie
  • *
  • Posts: 1
XTest Inspection Tool
« Reply #98 on: December 21, 2003, 05:49:00 PM »
Hello there,
I'm form Brazil and over here I don't have much informations about xlink. I tried several times, diferent times to conect but I can't!!! I think that's impossible!!!
M conection is a LAN, I already forwarded the port requested, I already disable my anti-virus too... nothing works!!!
Check below my test, everything looks fine but I can't login in the Xlink.
My friends, I'm a real newbie and I really need your help!!
Tks in advance!!!

[01:45:50] X-Link configuration inspection begins..

[01:45:50] Attempting Socket Bindings..
[01:45:50] Attempting X-Link Data Stream Bind (34518 UDP)..
[01:45:50] Attempting X-Link Data Stream Bind (34518 UDP)..
[01:45:50] Attempting XBConnect Hosting Stream Bind (8602 UDP)..

[01:45:50] Attempting Port Loobpack Tests..
[01:45:50] 34518 -> OK (192.168.0.1)
[01:45:50] 34519 -> OK (192.168.0.1)
[01:45:50] 8602 -> OK (192.168.0.1)

[01:45:50] Initialising WinPCap control layer..

[01:45:50] Enumerating WinPCap NICs:
[01:45:50] VIA PCI 10/100Mb Fast Ethernet Adapter                       (MS's Packet Scheduler) - DeviceNPF_{8E9BEDA1-4D74-43A4-9D40-66C3FDD56466}
[01:45:50] VIA VT6105 Rhine III Fast Ethernet Adapter                   (MS's Packet Scheduler) - DeviceNPF_{C2ABC875-86E3-41E6-AD8F-5AA89A3C55E0}
[01:45:50] Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler) - DeviceNPF_{37408FE3-6E97-4377-96E5-CCFEA6AB6509}

[01:45:50] Checking IsGood status of NICs:
[01:45:50] VIA PCI 10/100Mb Fast Ethernet Adapter                       (MS's Packet Scheduler) =  1
[01:45:50] VIA VT6105 Rhine III Fast Ethernet Adapter                   (MS's Packet Scheduler) =  1
[01:45:50] Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler) =  1

[01:45:50] Attempting Promiscuous Control:
[01:45:50] VIA PCI 10/100Mb Fast Ethernet Adapter                       (MS's Packet Scheduler) - STARTED
[01:45:50] VIA PCI 10/100Mb Fast Ethernet Adapter                       (MS's Packet Scheduler) - STOPPED
[01:45:50] VIA VT6105 Rhine III Fast Ethernet Adapter                   (MS's Packet Scheduler) - STARTED
[01:45:50] VIA VT6105 Rhine III Fast Ethernet Adapter                   (MS's Packet Scheduler) - STOPPED
[01:45:50] Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler) - STARTED
[01:45:50] Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler) - STOPPED

[01:45:50] MAC Capturing:
[01:45:50] Listening 5 seconds on VIA PCI 10/100Mb Fast Ethernet Adapter                       (MS's Packet Scheduler)
[01:45:55] Listening 5 seconds on VIA VT6105 Rhine III Fast Ethernet Adapter                   (MS's Packet Scheduler)
[01:46:00] Listening 5 seconds on Realtek 8139-series PCI NIC                                                       (MS's Packet Scheduler)

[01:46:05] UPnP Enumeration (WAIT):
[01:46:05] UPnP Init failed.. skipping enumeration..

[01:46:05] XServer External Test:
[01:46:05] Sending request..
[01:46:05] Waiting 5 seconds for reply..
[01:46:05] XServer accepted connection..
[01:46:08] Server -> Sent 3 test packets to 200.218.225.10 - HTTP response was 200.218.225.10 , full was

[01:46:10] Tests complete... post in the forum if you need to.

WHAT SHOULD I DO???
Logged

jefftse

  • Archived User
  • Newbie
  • *
  • Posts: 4
XTest Inspection Tool
« Reply #99 on: December 22, 2003, 05:48:00 PM »
[10:46:53 PM] X-Link configuration inspection begins..

[10:46:53 PM] Attempting Socket Bindings..
[10:46:53 PM] Attempting X-Link Data Stream Bind (34518 UDP)..
[10:46:53 PM] Attempting X-Link Data Stream Bind (34518 UDP)..
[10:46:53 PM] Attempting XBConnect Hosting Stream Bind (8602 UDP)..

[10:46:53 PM] Attempting Port Loobpack Tests..
[10:46:53 PM] 34518 -> OK (192.168.0.106)
[10:46:53 PM] 34519 -> OK (192.168.0.106)
[10:46:53 PM] 8602 -> OK (192.168.0.106)

[10:46:53 PM] Initialising WinPCap control layer..

[10:46:53 PM] Enumerating WinPCap NICs:
[10:46:53 PM] Dual-Band Wireless A+G Notebook Adapter (MS's Packet Scheduler) - DeviceNPF_{1DDBE90A-FF3B-4F16-BFC2-E51F5EBB1621}

[10:46:53 PM] Checking IsGood status of NICs:
[10:46:53 PM] Dual-Band Wireless A+G Notebook Adapter (MS's Packet Scheduler) =  1

[10:46:53 PM] Attempting Promiscuous Control:
[10:46:53 PM] Dual-Band Wireless A+G Notebook Adapter (MS's Packet Scheduler) - FAILED

[10:46:53 PM] MAC Capturing:
[10:46:53 PM] Dual-Band Wireless A+G Notebook Adapter (MS's Packet Scheduler) - FAILED

[10:46:53 PM] UPnP Enumeration (WAIT):
[10:46:59 PM] XLink Data 34518 UDP 34518
[10:46:59 PM] XLink Control 34519 UDP 34519

[10:46:59 PM] XServer External Test:
[10:46:59 PM] Sending request..
[10:46:59 PM] Waiting 5 seconds for reply..
[10:46:59 PM] XServer accepted connection..
[10:46:59 PM] 34518 -> OK (216.40.247.50)
[10:46:59 PM] 34519 -> OK (216.40.247.50)
[10:46:59 PM] Server -> Sent 3 test packets to 68.33.106.248 - HTTP response was 68.33.106.248 , full was

[10:47:04 PM] Tests complete... post in the forum if you need to.


I don't see the local xbox please help
Logged
Pages: 1 ... 5 6 [7]
« previous next »