Print

[deilzfcjk]

the 4gb nand r/w is a companion hardware for the nandx. If youhave a corona v2 ie 4gb nand
then you need the r/w kit.

The only way to check is to openitup and if there is a phison chip then it's a 4gb corona.



the 4gb nand r/w is a companion hardware for the nandx. If youhave a corona v2 ie 4gb nand
then you need the r/w kit.

The only way to check is to openitup and if there is a phison chip then it's a 4gb corona.

You could also use other glitchers out there. there are a lot of choices.

Matrix , squirt360, librasoft, glitchkey 360, team xecuter , super x360, or whatever you like. make your own.

[pepito01226]

Xell a 4gb corona is hard to do.

I have a list of parts that I have order trying to xell to gain just the key.

all 4gb will need a QSB 4gb r/w

Only purpose is to extract the NAND and write the .ecc to the NAND. You do not need the CR3 to extract the NAND just the r/w

the NANDx or Jr-Programmer works the same.

I have not tried using the CR3 but have tried CR ver.C and DGX

Both failed to boot xell.

You might want to also get comm to USB monitor.

If your system fails to boot xell you can monitor using the comm to usb monitor using jrunner.

[Dark Mod]

or simply get yourself a x360run and make life so easy