Topic: Liteon Dg-16d2s Replacment (Read 123 times)

wilgo45 · « **on:** March 29, 2013, 03:04:00 PM »

You are using different equipment from me.

But R707 - sounds like the wrong probe spot.

People using TX gear probe spot MPX01

I could be wrong about your method - But TX gear has never failed me

steveo1978 · « **Reply #1 on:** March 29, 2013, 03:38:00 PM »

You could just swap the PCB out and not have to worry about all that

trevaaaaaaa · « **Reply #2 on:** March 30, 2013, 05:13:00 AM »

QUOTE(steveo1978 @ Mar 29 2013, 10:38 PM)

You could just swap the PCB out and not have to worry about all that

Yeah I thought about doing that, only problem being the drive comes with 1 year warranty so don't want to break the seal.

I've extracted a key from one of these drives before using the same tools I have now, but not sure if since the ms dash update updated the drive's fw, so just need to know if this method/tools still works.

AwesomeNurd · « **Reply #3 on:** March 30, 2013, 12:01:00 PM »

The easiest thing as said above is to swap the pcb

trevaaaaaaa · « **Reply #4 on:** March 30, 2013, 12:29:00 PM »

QUOTE(AwesomeNurd @ Mar 30 2013, 07:01 PM)

The easiest thing as said above is to swap the pcb

I know....but alternative ideas please?

steveo1978 · « **Reply #5 on:** March 30, 2013, 12:33:00 PM »

They should work. I used an older device and a probe I made myself and it all worked fine. Just follow the jungleflasher tutorial and you should be fine. I think the tutorial also shows how to make the probe but I am not sure.

Author Topic: Liteon Dg-16d2s Replacment (Read 123 times)