Topic: Major Headache With A 0110 (Read 115 times)

MadMaxGR · « **on:** April 11, 2012, 01:34:00 AM »

I had one case in the past that it was 0110 coming from the RAm chips under the board. It worth to reflow them. If that doesn't work, then start looking for some loose or lost tiny components like small surface mount capacitors.

Avinitlarge · « **Reply #1 on:** April 14, 2012, 03:47:00 AM »

Have you tried replacing the GPU?

Avinitlarge · « **Reply #2 on:** April 14, 2012, 08:17:00 AM »

QUOTE(CrysisLTU @ Apr 14 2012, 02:19 PM)

If my GPU screws are too loose, I get 0022. Tighten them up - 0021.

You probably have a dead GPU then

Avinitlarge · « **Reply #3 on:** April 14, 2012, 10:13:00 AM »

To be honest, the resistance reading means dick, I dont even bother reading the resistance anymore.

xboxhaxorz · « **Reply #4 on:** April 15, 2012, 06:00:00 PM »

for testing you dont even need screws place the heat sinks on the chips to check if it boots

sinclairuser · « **Reply #5 on:** April 25, 2012, 08:04:00 PM »

we have had 2 phats before with 0110 that just would not repair a jasper and a late falcon the one that thinks its a jasper both never worked only thing my pro didnt try was replacing the ram chips hope that helps

MadMaxGR · « **Reply #6 on:** April 26, 2012, 03:27:00 AM »

QUOTE(wilgo45 @ Apr 14 2012, 07:28 AM)

Haven't spotted any missing surface mount devices yet

I did remove the bottom Ram chips. The code went from 0110 to 0022

I will redo my reball on the Gpu. Then I might reball the Cpu .... Or do you think I should go straight to the Cpu ??

I have just noticed.. You REMOVED the RAM chips?

If they are removed the 0021 and 0022 errors make sence!
All RAM chips must be in place and make proper contact, to boot up.

Author Topic: Major Headache With A 0110 (Read 115 times)