xboxscene.org forums

Author Topic: Wasabi 360 Ultra S Help  (Read 56 times)

kray34

  • Archived User
  • Newbie
  • *
  • Posts: 3
Wasabi 360 Ultra S Help
« on: February 24, 2012, 07:31:00 AM »

Out of edits ^^^ XD

Just to clarify for future reference:

The middle solder point of this picture is where the lifted pad is, the left side of cut is almost all gone from what I remember and the right side has just enough intact:

http://www.team-xecu...UTNIK360_MX.jpg

I solder the right side of the trace cut to this ALT point:

http://imageshack.us.../altpoint1.jpg/

PLEASE correct me if I'm wrong, I realize this has probably been answered and I searched high and low with mixed results. I don't know why, but I'm having super bad luck with this 9504 drive and do not wish to damage it anymore! =]

Thanks in advance Xbox-Scene!
Logged

robbman

  • Archived User
  • Newbie
  • *
  • Posts: 5
Wasabi 360 Ultra S Help
« Reply #1 on: February 24, 2012, 11:25:00 AM »

The red led means that the firmware load failed. It should turn green after the fw loads. might help to read the firmware manual again! Does it look like it is accessing the drive? make sure the sata cables are plugged into the right connectors and make sure the power connectors are installed correctly. if the drive works to play games then the trace shouldnt matter! the dashboard version may be a dealbreaker, it is unknown if the latest update will affect the wasabi because 14699 is the latest that they support atm.
Logged

kray34

  • Archived User
  • Newbie
  • *
  • Posts: 3
Wasabi 360 Ultra S Help
« Reply #2 on: February 24, 2012, 12:25:00 PM »

OH GOD! One of the SATA ports under the Wasabi was unusually large! Cable must've slipped out every time I clamped it in =] Hot glued it in like a bauwzzz, extracted DVD key! I have never seen the firmware actually succeed loading though.... always solid red, and yea I read the small users guide like 100+ times lol

Not loading my ISOs had ap25.bin cannot load error. Will update...

One last edit: Somewhere I read that if you put the contents of wasabi beta 3 in the root + the folder wasabi also in the root it works. Also, it did work, with new dashboard update too, not gonna try online but my backup ISOs of Black Ops and Madden 2012 work great.

Thanks for the replies!
Logged

darkobab

  • Archived User
  • Newbie
  • *
  • Posts: 3
Wasabi 360 Ultra S Help
« Reply #3 on: March 31, 2012, 10:13:00 AM »

I ran into a similar problem when I was trying to write the firmware to the Wasabi360.  The instructions in the Wasabi 360 Ultra User Guide v1.2 are incorrect.  It is not supposed to be in Passthrough mode to do this.  It has to be in emulation mode.  This worked for me.  I got the firmware update successful message and it told me to reboot.  After that, everything else in the guide worked.

I emailed Wasabi Support about this.  Will let you know what they say.
Logged