Topic: Matrix Freedom PCB for Liteon DG-16D4S Drives (Read 523 times)

DeadlyRox · « **Reply #15 on:** October 31, 2011, 03:53:00 AM »

WTf with all noobies here saying that this is a TX board clone ? wtf ? but what about the TX board ? those are clones too !! from the MS original ones -.-........... Matrix just did the same as TX did -.- using the MS original one to design theirs or TX is the only one that can do that ?
Tx prices are high because the high quality of the products and because (for now) he was the only one making it lol. So is good to see other company making them to stop the Monopoly that TX have, seeing this then "maybe" the prices will drop and we have more options at a reasonable price.

Yes, we have kamikaze butt...... sometimes sh*t happens lol and you need some spare

QUOTE(courier @ Oct 31 2011, 03:19 AM)

PFffffffffffffffffffffff really retard this clone production !!!!!!! for 16d5s guaranted not works 100%%%%%%%%

can you show me a link where it says that the TX one will work with these new drive ?

dank4life · « **Reply #16 on:** October 31, 2011, 04:02:00 AM »

QUOTE(DARKFiB3R @ Oct 30 2011, 08:54 PM)

And JF has code from all over the place, so they would have to be complete arseholes to try and lock anybody out.

I agree 100%
wait a minute, what about the 360Lizard?

oleq83 · « **Reply #17 on:** October 31, 2011, 04:13:00 AM »

Will this be live safe?

Ranger72 · « **Reply #18 on:** October 31, 2011, 06:15:00 AM »

QUOTE(oleq83 @ Oct 31 2011, 06:13 AM)

Will this be live safe?

I am sure the pcb will be just as safe as the stock one with stock firmware. However anytime you put a custom firmware on any pcb including a stock one the word "safe" goes out the window.

dougiegillam · « **Reply #19 on:** October 31, 2011, 06:26:00 AM »

QUOTE(Ranger72 @ Oct 31 2011, 02:15 PM)

I am sure the pcb will be just as safe as the stock one with stock firmware. However anytime you put a custom firmware on any pcb including a stock one the word "safe" goes out the window.

I wonder how Matrix have manged to use Any sata programing tool when TX only recommends X360USB, i couldnt do it with my via6421 i had to use the X360USB pro.

blade007 · « **Reply #20 on:** October 31, 2011, 06:46:00 AM »

Would this get round the not be able to update the newer dash that flashes the drive for xgd3 support if you have a tx board and no longer have the original board due to the spi lock status or can this be done with flashing the drive to 0272 and using the sputnik to lock the status.

BoNg420 · « **Reply #21 on:** October 31, 2011, 06:49:00 AM »

Funny, they blacked out all the chips so noone would know what components they are using haha

pitabread · « **Reply #22 on:** October 31, 2011, 08:41:00 AM »

QUOTE(courier @ Oct 31 2011, 02:47 AM)

all new drive out is D5

Yes, I understand that new drives are D5. I'm baffled as to what you said, you called them retarded for not supporting D5 when it only says for D4 models.

These boards will be good as it was provide more competition.

jeppe777 · « **Reply #23 on:** October 31, 2011, 09:36:00 AM »

WHere can I buy?

XE2010 · « **Reply #24 on:** October 31, 2011, 10:50:00 AM »

I'd like to throw in here that since we can boot into homebrew dashboards I don't see why it couldn't be possible to create a homebrew program to flash DVD drives to iXtreme X.X right from a glitched console. Considering we can get the correct key in Xell why cant we just boot to a Flash360 like program and mod our DVD drives directly from a image compiled on our PC's.....just sayin ;-)

zyo · « **Reply #25 on:** October 31, 2011, 01:18:00 PM »

QUOTE(courier @ Oct 31 2011, 10:47 AM)

all new drive out is D5

that D5 drive was manufactured in 2010, I dont think there are a lot of D5s out there

xboxdawg · « **Reply #26 on:** October 31, 2011, 01:55:00 PM »

So if one was to replace their board on the DVD drive with this one you could flash it with your key/cfw and would not have to cut any traces or do the kamikazee method?

warbeast · « **Reply #27 on:** October 31, 2011, 01:59:00 PM »

QUOTE(XE2010 @ Oct 31 2011, 05:50 PM)

I'd like to throw in here that since we can boot into homebrew dashboards I don't see why it couldn't be possible to create a homebrew program to flash DVD drives to iXtreme X.X right from a glitched console. Considering we can get the correct key in Xell why cant we just boot to a Flash360 like program and mod our DVD drives directly from a image compiled on our PC's.....just sayin ;-)

using a 360 to flash isnt going to make it any easer
a hombrew xell xbox will only show the key for that xbox as it doesnt read it from the drive it reads it from the keyvault on the 360

the only thing glitch can help fw with is finding the key for the drive in the xbox being glitched
aslong as ms doesnt fix this glitch on new slims even if we cant dump the key from from new drives we could glitch to find the key from keyvault witch could be useful

vv uk garf vv · « **Reply #28 on:** October 31, 2011, 04:04:00 PM »

QUOTE(BoNg420 @ Oct 31 2011, 01:49 PM)

Funny, they blacked out all the chips so noone would know what components they are using haha

+1 was wandering this myself

DeadlyRox · « **Reply #29 on:** October 31, 2011, 06:25:00 PM »

QUOTE(xboxdawg @ Oct 31 2011, 03:55 PM)

So if one was to replace their board on the DVD drive with this one you could flash it with your key/cfw and would not have to cut any traces or do the kamikazee method?

Yup sir, your are right, remember that you need to solder just the 4 cables (very easy)

Author Topic: Matrix Freedom PCB for Liteon DG-16D4S Drives (Read 523 times)