Topic: Matrix Freedom PCB for Liteon DG-16D4S Drives (Read 522 times)

Xbox-Scene · « **on:** October 30, 2011, 04:52:00 PM »

Matrix Freedom PCB for Liteon DG-16D4S Drives
Posted by XanTium | October 30 18:52 EST | News Category: Xbox360

We received this email from Matrix Team:

Quote

Matrix Team is proud to announce the availability this week, of our new product: Matrix Freedom PCB.
Large quantities are available, all orders will be shipped immediately!

Features:
- Fits all Liteon DG-16D4S Drives
- Fully compatible with 9504, 0225 and 0401 fw revision.
- Supplied with external programmer to enable/disable write protect and reflash firmware. No need to open again the DVD or the Xbox360 once installed.
- An easy and simple swap out system for the original DVD board.
- Easily programmable using any SATA programming tool.
- Fully compatible with Jungleflasher software.
(IMG:http://pictures.xbox-scene.com/xbox360/matrixfreedompcb/matrixfreedompcb_1_s200.jpg) (IMG:http://pictures.xbox-scene.com/xbox360/matrixfreedompcb/matrixfreedompcb_2_s200.jpg)
(IMG:http://pictures.xbox-scene.com/xbox360/matrixfreedompcb/matrixfreedompcb_3_s200.jpg)

Official Site: http://www.infinitymod.com

snake3 · « **Reply #1 on:** October 30, 2011, 05:59:00 PM »

very nice

ZakMcRofl · « **Reply #2 on:** October 30, 2011, 06:53:00 PM »

Price?

ruciz · « **Reply #3 on:** October 30, 2011, 07:17:00 PM »

Matrix Infinity - top of the line PS2 chip

Matrix 360 glitch chip - expensive way to ship $3 of components.

Lets see where these boards lie- as I presume they are a clone of the TX boards and rely on TX/JF products to work....

DrNugu · « **Reply #4 on:** October 30, 2011, 07:46:00 PM »

QUOTE(ruciz @ Oct 31 2011, 10:17 AM)

Lets see where these boards lie- as I presume they are a clone of the TX boards and rely on TX/JF products to work....

Some people want options to paying a ridiculous $75 for the $ecuter pcb, so I'm happy someone is cloning this.

So what is the price?

ydgmms · « **Reply #5 on:** October 30, 2011, 08:02:00 PM »

but why... kamikazeeeee

klbarnes1 · « **Reply #6 on:** October 30, 2011, 08:18:00 PM »

WHATS UP PLAYA HATA'S! I tried installing a sputnik360 and ending up basically causing a big mess because I didn't have the right tools. Anyway long story short I need a pcp board to put in my 9504 slim. Luckily I already have my key because I had modded it before it got locked by the update. How much is this going to cost, I need to order one yesterday! Is the only soldering involved with this the ones for the colored wires? Thanks PLAYA'S!

This post has been edited by klbarnes1: Oct 31 2011, 03:57 AM

death69inc · « **Reply #7 on:** October 30, 2011, 08:43:00 PM »

like to see the price

if they are as same or higher than mx ic boards ill stick with my mxic's

if they are cheaper ill go with them as $55 for a mxic board is decent compared to $80 for a tx board but if it works and its cheaper why not.

This post has been edited by death69inc: Oct 31 2011, 03:48 AM

chinmi · « **Reply #8 on:** October 30, 2011, 08:50:00 PM »

well, it's always nice to see a good competition...

but i bet tx will make the next firmware or jungleflasher will only compatible to their own sexecuter board....

but if this gonna be cheaper... well.... it's a win win solution for all of us...

death69inc · « **Reply #9 on:** October 30, 2011, 08:53:00 PM »

doubt that

as a tx board i just a clone of a mxic board with one of there sputnik boards embeded

dont see how they can lock out a clone of thiers

(never understood why they where so high) heard was chip supply issue but ........ more like no comp.

This post has been edited by death69inc: Oct 31 2011, 03:54 AM

alukado · « **Reply #10 on:** October 30, 2011, 09:08:00 PM »

QUOTE(death69inc @ Oct 31 2011, 03:43 AM)

like to see the price

if they are as same or higher than mx ic boards ill stick with my mxic's

if they are cheaper ill go with them as $55 for a mxic board is decent compared to $80 for a tx board but if it works and its cheaper why not.

Yoyobase are selling the Matrix Freedom PCB for $54.99, also their Matrix Glitcher and programmer are very cheap too.

This post has been edited by alukado: Oct 31 2011, 04:09 AM

DARKFiB3R · « **Reply #11 on:** October 30, 2011, 09:54:00 PM »

Stand out features for me are...

- Large quantities are available
- Supplied with an external programmer
- No need to open the DVD drive or the Xbox 360 again, once installed.

Sounds pretty sweet

To the people bitching about TX (for a crime they haven't even committed), they do not create the firmware or JungleFlasher, so there will be no locking out of competitors products. It's not their choice to make, even if they would do such a shitty thing.

C4ever always shares his toys with the other kids in the playground, so nothing to worry about there.

And JF has code from all over the place, so they would have to be complete arseholes to try and lock anybody out.

So I think it's safe to remove those tinfoil hats

courier · « **Reply #12 on:** October 31, 2011, 01:19:00 AM »

QUOTE(alukado @ Oct 31 2011, 04:08 AM)

Yoyobase are selling the Matrix Freedom PCB for $54.99, also their Matrix Glitcher and programmer are very cheap too.

PFffffffffffffffffffffff really retard this clone production !!!!!!! for 16d5s guaranted not works 100%%%%%%%% (IMG:style_emoticons/default/muhaha.gif)

pitabread · « **Reply #13 on:** October 31, 2011, 01:57:00 AM »

QUOTE(courier @ Oct 31 2011, 12:19 AM)

PFffffffffffffffffffffff really retard this clone production !!!!!!! for 16d5s guaranted not works 100%%%%%%%%

I'm confused where does it say it's for the 16d5s? I only see it's for DG-16D4s.

courier · « **Reply #14 on:** October 31, 2011, 03:47:00 AM »

QUOTE(pitabread @ Oct 31 2011, 08:57 AM)

I'm confused where does it say it's for the 16d5s? I only see it's for DG-16D4s.

all new drive out is D5

Author Topic: Matrix Freedom PCB for Liteon DG-16D4S Drives (Read 522 times)