xboxscene.org forums

Author Topic: 1.18v Rail Shorted To Ground = 0001  (Read 34 times)

Gokussj5okazu

  • Archived User
  • Full Member
  • *
  • Posts: 218
1.18v Rail Shorted To Ground = 0001
« on: September 21, 2011, 03:05:00 PM »
Ok, needing some help on this one.

Recently reflowed a 0102 mobo and got it all working again. Put it back together, but I forgot one nylon washer on the bottom.

The head of one of the screws scraped through the adjacent plane, and shorted it to ground. On a good board, I measured this plane as a 1.18V plane, that is supplied by the two MOSFETS above the CPU on the top of the board.

(IMG:http://i52.tinypic.com/2exskk0.jpg)


(IMG:http://i55.tinypic.com/rvyb2q.jpg)

I checked Q6B1 and Q7B1, and found Q6B1 to be bad. I replaced it but am still getting the 0001 error. Does anyone have any ideas what else to check and/or replace in order to fix this?
Logged

Gokussj5okazu

  • Archived User
  • Full Member
  • *
  • Posts: 218
1.18v Rail Shorted To Ground = 0001
« Reply #1 on: September 23, 2011, 01:17:00 PM »
Bump! Anyone?
Logged