xboxscene.org forums

Author Topic: Xenon Jtag Cooling  (Read 74 times)

Avinitlarge

  • Archived User
  • Full Member
  • *
  • Posts: 143
Xenon Jtag Cooling
« on: September 01, 2011, 08:14:00 AM »
Don't fit a gen 2 heatsink, they are crap and you will get higher CPU temps. Clean the GPU and apply new paste then see how it goes
Logged

relaxxx

  • Archived User
  • Hero Member
  • *
  • Posts: 504
Xenon Jtag Cooling
« Reply #1 on: September 01, 2011, 03:33:00 PM »
As long as your GPU and EDRAM are in the 40's, your xbox is f###in' golden!
Xenon CPU's run fine at 75-80C, fans should ramp up at 80C and not go over.
Logged

II Poodle II

  • Archived User
  • Full Member
  • *
  • Posts: 110
Xenon Jtag Cooling
« Reply #2 on: January 26, 2012, 06:39:00 PM »
Recently i played skyrim for a good 6 hours and i went to xexmenu and they were

CPU:60.1
GPU:41.4


my edram seems to be like 10* hotter than the gpu?
Logged

relaxxx

  • Archived User
  • Hero Member
  • *
  • Posts: 504
Xenon Jtag Cooling
« Reply #3 on: January 27, 2012, 04:03:00 AM »
It could be a discrepancy between the two sensors but 10 degrees difference is concerning.
If you want your Xenon to last as long as possible then add a second gen aluminum heatsink on the GPU. Every time I've tested a GPU with one of those the EDRAM was around 3 Deg cooler than the GPU. Regardless, it should have both running in the 30's and if there's no previous BGA damage then the Xenon should last a lifetime.
Logged