xboxscene.org forums

Pages: 1 ... 4 5 [6] 7 8 ... 14

Author Topic: Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold  (Read 2021 times)

OggyUK

  • Archived User
  • Hero Member
  • *
  • Posts: 939
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #75 on: February 20, 2011, 07:23:00 PM »
Fixed..

Thanks!
Logged

k0mpresd

  • Archived User
  • Sr. Member
  • *
  • Posts: 289
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #76 on: February 20, 2011, 07:43:00 PM »
QUOTE(OggyUK @ Feb 20 2011, 09:23 PM) View Post

Fixed..

Thanks!


tested and works awesome. thanks!   smile.gif

just did 2 drives (1 stock, 1 lt flashed) and so much easier than mra. thanks again.
Logged

dank4life

  • Archived User
  • Newbie
  • *
  • Posts: 47
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #77 on: February 20, 2011, 09:32:00 PM »
please dont be fooled by copycat vaporware folks. and pay no attention to the man behind the curtain. I'm sure team exlax will release an original product eventually.  you may find karma to be a cruel bitch, but some of us choose to Think. Different.
Logged

Takashi

  • Archived User
  • Hero Member
  • *
  • Posts: 899
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #78 on: February 20, 2011, 09:40:00 PM »
What the hell are you even talking about?
Logged

DARKFiB3R

  • Archived User
  • Sr. Member
  • *
  • Posts: 464
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #79 on: February 20, 2011, 09:48:00 PM »
Maplin do sell a 1F capacitor (IMG:style_emoticons/default/smile.gif)

Link

This post has been edited by DARKFiB3R: Feb 21 2011, 05:49 AM
Logged

stewii griffin

  • Archived User
  • Newbie
  • *
  • Posts: 41
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #80 on: February 20, 2011, 09:52:00 PM »
QUOTE(DARKFiB3R @ Feb 20 2011, 11:48 PM) *

Maplin do sell a 1F capacitor (IMG:style_emoticons/default/smile.gif)

Link

LOL Cant wait to see someone set that up with some 4 gauge wire (IMG:style_emoticons/default/biggrin.gif)
Logged

HOMiE7

  • Archived User
  • Jr. Member
  • *
  • Posts: 76
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #81 on: February 20, 2011, 10:44:00 PM »
QUOTE(OggyUK @ Feb 21 2011, 04:56 AM) View Post

JungleFlasher v0.1.79b (208S)

PhatKey Suport.

...

Nice one, Oggy! smile.gif
I've read POGO_MO_THOIN.pdf and I have some questions...

"Please Note, the only ways to know 100% that a key is good, is to ensure your drive key was verified by JF or flash your firmware to a identical drive first and test it in the xbox itself" - it's from the manual.

But you have CDB to check if the key is good. So why you just not add this feature in JF too to check dumped key against STILL UNMODDED (not erased, with original firmware) drive?

Maybe it'll be good to add "Verify key" button into DVDKey 32 tab?... smile.gif

"Key has been tested and verified, thanks C4eva!" - that's what I'm talking about.

---

One more thing. Can we read full dump using this solution or only just key+inquiry+identify+serials=dummy? I've saw on pictures that JF says "No calibration data in source"...

Thanks!
Logged

iateshaggy

  • Archived User
  • Hero Member
  • *
  • Posts: 906
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #82 on: February 20, 2011, 11:05:00 PM »
key verification works by making sure other info in the firmware matches, not the key.  it more or less makes sure a dump matches the drive, no thtat the key is right.  it assumes that current methods get the right key, which they do.  

oggy, how does this new capacitor key extraction work if u don't mind blowing my mind.  is this a hack or something that was built into the drives on purpose?
Logged

HOMiE7

  • Archived User
  • Jr. Member
  • *
  • Posts: 76
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #83 on: February 20, 2011, 11:33:00 PM »
QUOTE(iateshaggy @ Feb 21 2011, 09:05 AM) View Post

key verification works by making sure other info in the firmware matches, not the key.  it more or less makes sure a dump matches the drive, no thtat the key is right.  it assumes that current methods get the right key, which they do.

Huh? What about DVDKey 32 then? We probing R707 and getting only key+inquiry+identify+serial from PLDS DG-16D2S 74850C, but key verification works fine. So it looks like don't need full dump to verify key against the drive. By the way DosFlash (16bit version at least) have this feature!
Logged

Mjollnir

  • Archived User
  • Jr. Member
  • *
  • Posts: 67
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #84 on: February 21, 2011, 01:02:00 AM »
Thought PMT would be a full dump and get all the calibration data too, wishful thinking sad.gif

Guess I will stick with MRA full dump (yes I am pedantic and likes full dumps)
Logged

OggyUK

  • Archived User
  • Hero Member
  • *
  • Posts: 939
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #85 on: February 21, 2011, 01:20:00 AM »
QUOTE(HOMiE7 @ Feb 21 2011, 05:44 AM) View Post

Nice one, Oggy! smile.gif
I've read POGO_MO_THOIN.pdf and I have some questions...

"Please Note, the only ways to know 100% that a key is good, is to ensure your drive key was verified by JF or flash your firmware to a identical drive first and test it in the xbox itself" - it's from the manual.

But you have CDB to check if the key is good. So why you just not add this feature in JF too to check dumped key against STILL UNMODDED (not erased, with original firmware) drive?

Maybe it'll be good to add "Verify key" button into DVDKey 32 tab?... smile.gif

"Key has been tested and verified, thanks C4eva!" - that's what I'm talking about.

---

One more thing. Can we read full dump using this solution or only just key+inquiry+identify+serials=dummy? I've saw on pictures that JF says "No calibration data in source"...

Thanks!



The key is verified, after dump/before erase,

Thhat was just a c/p from the original tutorial, that oviously hadnt been removed when Key Verification was added to JF.

Also, It doesnt dump 3c000 data, its redundant information, anyway.

Key Verification works by verifying the KEY against the drive  - Not any other data.
Logged

NYCXBOX

  • Archived User
  • Hero Member
  • *
  • Posts: 529
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #86 on: February 21, 2011, 01:33:00 AM »
Can we get a hack for this to work with Maximum probe?
Logged

OggyUK

  • Archived User
  • Hero Member
  • *
  • Posts: 939
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #87 on: February 21, 2011, 01:47:00 AM »
the probe/scorpion should work fine
Logged

HOMiE7

  • Archived User
  • Jr. Member
  • *
  • Posts: 76
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #88 on: February 21, 2011, 03:54:00 AM »
OggyUK, but can you add Key Verification button anyway? It would be useful to check keys from my own database against flashed drive in service - I haven't got all keys in JF's database in registry and JF can't find it automatically.

I've make my own scheme - please check is everything is OK here.

(IMG:http://homie7.narod.ru/pogo_mo_thoin_-_scheme_by_homie7_-_v1.0.png)

Big place for capacitor, small place for LED.

(IMG:http://i50.photobucket.com/albums/f320/RDCXBG/360DVDPowerConnectorToMolex.jpg)

Also I have another question. It is OK to use capacitor which is designed for 2.5v with 3.3v?

This post has been edited by HOMiE7: Feb 21 2011, 12:01 PM
Logged

OggyUK

  • Archived User
  • Hero Member
  • *
  • Posts: 939
Team Xecuter POGO MO THOIN – Homebrew Liteon Probe – No Cuts / No Sold
« Reply #89 on: February 21, 2011, 04:05:00 AM »
Right click source/target area - key verify is in there.
Logged
Pages: 1 ... 4 5 [6] 7 8 ... 14
« previous next »