Topic: Team Xecuter POGO MO THOIN Homebrew Liteon Probe No Cuts / No Sold (Read 2020 times)

tomasvilda · « **Reply #120 on:** February 22, 2011, 09:04:00 AM »

KMA method without capacitor implemented!

Here are pics

IPB Image

Works!

Buzzcut · « **Reply #121 on:** February 22, 2011, 09:09:00 AM »

QUOTE(ARY @ Feb 22 2011, 12:41 PM)

1. Power on drive, swith on.
2. Press PhatKey, then Yes
3. Put switch off, connect GND to MPX01, Put switch on.
4. After "Extract Complete" power off the drive, disconnect GND from MPX01.
5. Power on the drive, then press OK.
6. Done!

Yep, just tested on Stock and LT+. That's just saved me a 10 mile cycle to pick up that Capacitor..

Awesome work.

Mikaz · « **Reply #122 on:** February 22, 2011, 09:43:00 AM »

Made one without any CK, simply powering from xbox360.

IPB Image

Buzzcut · « **Reply #123 on:** February 22, 2011, 09:58:00 AM »

And mine without even a proper switch...I think we've almost reached the ease of flashing a BenQ

pigbait · « **Reply #124 on:** February 22, 2011, 10:02:00 AM »

this should yout right, or does my 3.3 need to be from the drive? i was going to give 3.3v from the maximus v2 3.3 pad?

upload image

pigbait · « **Reply #125 on:** February 22, 2011, 10:25:00 AM »

i think i might be reading this wrong you need to kill 3.3v from drive, is that right?

if so ill get the cap and put it were my switch is and it will look ok...

Buzzcut · « **Reply #126 on:** February 22, 2011, 10:41:00 AM »

QUOTE(pigbait @ Feb 22 2011, 05:25 PM)

i think i might be reading this wrong you need to kill 3.3v from drive, is that right?

if so ill get the cap and put it were my switch is and it will look ok...

Yes, see my pic above, just take the GND from the connector and put a switch in the 3.3v line (pin 6 on the connector), you don't need a cap.

xPlayax · « **Reply #127 on:** February 22, 2011, 10:49:00 AM »

QUOTE(tomasvilda @ Feb 22 2011, 05:04 PM)

KMA method without capacitor implemented!

Here are pics

IPB Image

Works!

hi, nice idea but it cant work! it just work if you cut the line on the ck between the switch...
elswere it maks no sence...

pigbait · « **Reply #128 on:** February 22, 2011, 10:52:00 AM »

Think I'll still get the cap

tomasvilda · « **Reply #129 on:** February 22, 2011, 11:06:00 AM »

QUOTE(xPlayax @ Feb 22 2011, 07:49 PM)

hi, nice idea but it cant work! it just work if you cut the line on the ck between the switch...
elswere it maks no sence...

I think it's not visible clearly, but additional switch, turns on/off only 6 pin (+3.3V)

tomasvilda · « **Reply #130 on:** February 22, 2011, 11:32:00 AM »

QUOTE(xPlayax @ Feb 22 2011, 08:18 PM)

i know, but it wont cut the power... i just rebuild your method and mesure it but its still power on the pin 6...
the only difference betwen your mod and mine is that i have a ck3 pro but you wire the pin 6 to the eject switch. no cut on the ck pcb, no 3,3v cut =)

sry for my poor english... im german

CK pcb has cut track that supply +3.3V. Maybe it poorly visible.

here is zoomed pic

IPB Image

xPlayax · « **Reply #131 on:** February 22, 2011, 12:02:00 PM »

ya thats much better =) thx, great job, clean and nice

Serious Sam · « **Reply #132 on:** February 22, 2011, 12:09:00 PM »

Super simple mod, can't get any easier than this. Thanks guys.

Here's mine.

image host

andy.macht · « **Reply #133 on:** February 22, 2011, 01:03:00 PM »

sata connected?

the new solution without cap is working like a charm!
thanks to all who worked on that!

Suso14 · « **Reply #134 on:** February 22, 2011, 01:16:00 PM »

Any idea for not cut the 3.3 V cable of my power cable Xbox? It's the only cable that i have, so if i cut the cable i have scare that my xbox don't power on

Tnx (Sorry my poor English)

Author Topic: Team Xecuter POGO MO THOIN  Homebrew Liteon Probe  No Cuts / No Sold (Read 2020 times)

Author Topic: Team Xecuter POGO MO THOIN Homebrew Liteon Probe No Cuts / No Sold (Read 2020 times)