Topic: 360Lizard: The Wait is Almost Over - No-Cut, No-Solder Solution for (p (Read 1131 times)

LittleBH · « **Reply #90 on:** February 10, 2011, 01:06:00 PM »

QUOTE(letsmod @ Feb 10 2011, 05:21 PM)

We are making the guide like JF, will have LOTS of pictures

I suppose i should be flattered!

Imitation is the greatest form of flattery

deilzfcjk · « **Reply #91 on:** February 10, 2011, 01:07:00 PM »

QUOTE(kneehighspy @ Feb 10 2011, 12:00 PM)

that is correct, you can use the 360 for power or an xtractor to power the unit. frankly if i kinda understood this, i probably would have waited for the usbxtractor since i have to use my old xtractor for external power. so don't be mislead, you can't just use an external 12v power supply to power the xtractor / drive.

to me it seems i need to use my external 12v power supply to power the xtractor, then use the xtractor and power drop kit to power the drive.

Why are you complaining about power adapters? Every IC on this planet uses 1.8v-5volts. If you did not connect the Power drop to either an xtractor/CK3/Xeno conn kit, how on earth would you power the drive?

@ all YOU HAVE THE OPTION to connect it to the xbox 360 as well.

mr-crix03 · « **Reply #92 on:** February 10, 2011, 01:18:00 PM »

QUOTE(deilzfcjk @ Feb 10 2011, 09:07 PM)

Why are you complaining about power adapters? Every IC on this planet uses 1.8v-5volts. If you did not connect the Power drop to either an xtractor/CK3/Xeno conn kit, how on earth would you power the drive?

@ all YOU HAVE THE OPTION to connect it to the xbox 360 as well.

But this is my point, the whole "which is better" argument between x360usb and this was the lack of a connectivity kit, maxi decided to include what was called at the time a mini connectivity kit. Which if you read the tut it is clearly not the case.

LittleBH · « **Reply #93 on:** February 10, 2011, 02:18:00 PM »

QUOTE(naser075 @ Feb 10 2011, 02:04 PM)

yea people i think this product will be a dissaster, about to even send it back with chargeback on credit card in case they refuse my refund. remeber you can do that as longest u send back product with tracking number. and seller will hate u if u do that casue it is a - point for him with the credit card companies.
This message is for the MAXIMUS team if you listen to your customers:

Learn somethign from your competition,....never release a product without it's complete manual. Just because you know your damn product does not mena the rest of the people do. A manual for a device sold to a household must be dummy proof. meaning the most idiotic person should be able to understand it. Again you should look at the tutorial from jungleflasher and TX team and you will understand the completion of a manual. Charge people 100.00$ for a product at least do a spell check . make it worth wild that we are proud to have bought the product, unlike me that wants to putt it in to the garbage ...but i won't give up my 100$ that easy

QUOTE(naser075 @ Feb 10 2011, 04:59 PM)

listen we are not blasting any1 you have a great product, please simply putt pictures up in the manual it would really be great. If you look at Jungleflashers manual it is what I call a complete manual. maybe that would be a great tutorial to follow. No1 will judge as longest we ( any dummy) can understand it.
As for the grammer thing i know it is not your primary language but you can ask any1 here they will correct anyhting for you anytime. Hope we are all good just putt up a good and comprehensive tutorial

QUOTE(naser075 @ Feb 10 2011, 06:41 PM)

beautiful man it is that reassurance we needed from you nothign else. see that was not complicated
thanks again plz advise when it is ready

thank you again

QUOTE(naser075 @ Feb 10 2011, 08:04 PM)

i don't gte it is says it comes with a connectivity kit . what is the problem we need to buy more parts other add ons to make this work i tohught it was all ready in the box and we can use it right away

QUOTE(naser075 @ Feb 10 2011, 09:03 PM)

if i were u guys I would not look at that tutorial and wait for it to be complete unless some1 can putt somehting on youtube so we can all see how it works

Im somewhat confused as to exactly where you are coming from here! you seem to change your stance every post you make!

naser075 · « **Reply #94 on:** February 10, 2011, 03:48:00 PM »

QUOTE(LittleBH @ Feb 10 2011, 03:18 PM)

Im somewhat confused as to exactly where you are coming from here! you seem to change your stance every post you make!

I'll explain it to you ,..first i get the product, then tutorial is not complete so i bare with them till they complete it to make it dummy proof. not very complicated to understand.

now i will wait till i get the full completed tutorial for usage as promised

LittleBH · « **Reply #95 on:** February 10, 2011, 03:50:00 PM »

QUOTE(letsmod @ Feb 10 2011, 04:51 PM)

JF Manual wasn't built overnight either, it is also a work in progress with constant changes.

We ask you just bare with us.

we are adding all the liteon info to manual today and will have posted tonight, I have been going through the manual and correcting grammar; as ENGLISH is not maximus's native language.

Regards,
VGC Repairs

Correct - It wasn't written overnight!

but it is never released half finished for any current version!.

The constant changes are only made to keep up with revision changes of Jungleflasher - If a method changes or there is important info that is required to be publicised - the tut is updated! (last req'd update was 1.74, jf is now on 1.78! - the tut didnt require any additional info - so it remained on ver 1.3.8!)

Thats called - Common sense!

OggyUK · « **Reply #96 on:** February 10, 2011, 09:15:00 PM »

Wait, errrmmmmmmm

If the case delayed it by 2-3 weeks, What the fuck were they going to release?

1 paragraph in a guide? only 2 buttons on the lizard work ?

The rest will follow, but thats ok, because it has potential.

I hope for any buyers sake, its supported more than the Xtractor Pro 2 was ....

deilzfcjk · « **Reply #97 on:** February 10, 2011, 09:52:00 PM »

I had no problem what so ever with the xtractor pro 2. Why are you such a brat?

OggyUK · « **Reply #98 on:** February 10, 2011, 10:05:00 PM »

Nice execution of avoiding the questions asked ....

So, tell me, do you really think dvdkey32 was an elaborate ploy to make money from serial adapters, or maybe youlll realise the hack was an exploit, the same command set opened up lo83 (sata!!) too.

I may be a brat, but sadly for you, I'm an educated one....

Even redeath admitted Lizard released prematurely ....

Again, why if the h/w was delayed for ~3 weeks, were the documentation and/or applications not worked on ?

Seriously .....

We held JF releases back for the user guide to catch up.

Also, referencing my XP2 point, when did you see the last update from it? When did software fully integrate it ?

Jameason · « **Reply #99 on:** February 11, 2011, 12:52:00 AM »

Just posted to twitter: Scorpion video tutorial re-uploading to youtube. Will release as soon as finish. Also FW updater and Manual 1.01 being release at same time

MadMaxGR · « **Reply #100 on:** February 11, 2011, 02:58:00 AM »

I found this for anyone looking a video with the scorpion 2

xmstree · « **Reply #101 on:** February 11, 2011, 04:37:00 AM »

Cool, can't wait for the electrical engineers to start dissecting this tool and method. Is it effectively the same as the MRA method, but just a different way of grounding the trace / cutting the circuit without needing to do an actual cut?

P.S OggyUK, change your signature, it is causing an authentication dialog in this thread.

OggyUK · « **Reply #102 on:** February 11, 2011, 05:04:00 AM »

QUOTE(xmstree @ Feb 11 2011, 11:37 AM)

Cool, can't wait for the electrical engineers to start dissecting this tool and method. Is it effectively the same as the MRA method, but just a different way of grounding the trace / cutting the circuit without needing to do an actual cut?

P.S OggyUK, change your signature, it is causing an authentication dialog in this thread.

Yeah, I was fucking aout with privacysettings, just got it now myself - Will fix. Thanks

** Should be sorted

totoz · « **Reply #103 on:** February 11, 2011, 06:09:00 AM »

nice
could u please upload the video in another host?

angrykid · « **Reply #104 on:** February 11, 2011, 08:05:00 AM »

glad I wasn't an early adopter of this...

Author Topic: 360Lizard: The Wait is Almost Over - No-Cut, No-Solder Solution for (p (Read 1131 times)