Topic: Xecuter LT Clip: First 100pct No-Solder Kit For Liteon DVD On Sale - I (Read 162 times)

Xbox-Scene · « **on:** July 08, 2010, 01:07:00 PM »

Xecuter LT Clip: First 100pct No-Solder Kit For Liteon DVD On Sale - Instructions
Posted by XanTium | July 8 15:07 EST | News Category: Xbox360

From team-xecuter.com:

Quote

The new Xecuter LT Clip + LT Switch v2 bundle pack is now exclusively ON SALE HERE

This kit has been designed with the beginner in mind. It's been in development for a while due to the absolute precision and stability needed to make sure it works for the the lifetime of the DVD Drive with no soldering or glue for trace repairs. There is even included a built in continuity tester to make sure your trace cuts are perfect !
Also Includes our MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)
This is the first and only real Liteon solution where there is 100% No Soldering & No Glue - The fastest and easiest "MRA Hack" product on the market.

Features:
* The Only Liteon Solution Recommended By Team Jungle !
* Unique designed clip
* No Solder & No Glue
* External LT Switch
* Built in continuity tester to make sure your trace cuts are perfect
* Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
* Easy & Simple Install - Install Once & Forget
* Enable / Disable Switch
* Multi-R Switch (18, 20, 22 Ohms)
* MRA/Normal Mode LED
* Completely Undetectable
* No Need To Uninstall
* Works with ALL fw tools including the latest Jungle Flasher

You can also download the very easy to follow instructions. They are available on this page.

Official Site: http://team-xecuter.com

Mik3h · « **Reply #1 on:** July 08, 2010, 01:18:00 PM »

Cool.

Zelpus · « **Reply #2 on:** July 08, 2010, 02:00:00 PM »

Would this work if I used it to get the firmware from a drive already upgraded by LT 1.0? I'm missing the original firmware and heard this was the only way to recover.

FixItOrModIt · « **Reply #3 on:** July 08, 2010, 02:31:00 PM »

is this reusable? can you flash a drive with it, then take it off and use it on another drive?

clouduz · « **Reply #4 on:** July 08, 2010, 02:36:00 PM »

QUOTE(FixItOrModIt @ Jul 8 2010, 03:31 PM)

is this reusable? can you flash a drive with it, then take it off and use it on another drive?

X2 consider me sold if it is reusable

crisdo98 · « **Reply #5 on:** July 08, 2010, 02:36:00 PM »

QUOTE(FixItOrModIt @ Jul 8 2010, 09:31 PM)

is this reusable? can you flash a drive with it, then take it off and use it on another drive?

You'll be able to remove it but you'll then need to reconnect the cut traces.

vb_encryption_vb · « **Reply #6 on:** July 08, 2010, 04:36:00 PM »

QUOTE(FixItOrModIt @ Jul 8 2010, 04:31 PM)

is this reusable? can you flash a drive with it, then take it off and use it on another drive?

1 chip per box, all this is for is so you don't have to solder the traces.... you still need to cut em however.

iateshaggy · « **Reply #7 on:** July 08, 2010, 05:02:00 PM »

at least noobs won't be pulling traces/pads now when they can't get it to work.

modrobert · « **Reply #8 on:** July 08, 2010, 08:58:00 PM »

Great. First Team Xecuter ban the guy for posting his fakir method in their forums, and now they steal the idea to sell it.

Aldur4 · « **Reply #9 on:** July 08, 2010, 09:15:00 PM »

Why is this listed as an "exclusively on sale here?" Is it different than:

http://www.modtrader...-no-solder.html

ddxcb · « **Reply #10 on:** July 08, 2010, 09:46:00 PM »

QUOTE(Aldur4 @ Jul 8 2010, 08:15 PM)

Why is this listed as an "exclusively on sale here?" Is it different than:

http://www.modtrader...-no-solder.html

HEHE i payed 13.99 + shipping for it xD

d4rk5ky · « **Reply #11 on:** July 08, 2010, 10:03:00 PM »

Nice stuff, this should make it a little easier for noobs like me lol. All you really have to worry about is making sure you cut the traces correctly.

ImRickJamesB1tch · « **Reply #12 on:** July 09, 2010, 12:12:00 AM »

You still need to cut the traces, which is the hardest part, not the soldering

There is no alternative to cutting the traces, you have to, yet there is an alternative for soldering, it's called silver conductive glue. EVERYONE can do this, its simple, if your soldering skills are not good

modrobert · « **Reply #13 on:** July 09, 2010, 12:19:00 AM »

I smell astroturfing...

This post has been edited by modrobert: Jul 9 2010, 07:21 AM

BoNg420 · « **Reply #14 on:** July 09, 2010, 07:54:00 AM »

QUOTE(iateshaggy @ Jul 8 2010, 07:02 PM)

at least noobs won't be pulling traces/pads now when they can't get it to work.

They will just find new ways to mess it up. either bad trace cuts or shorts.

Author Topic: Xecuter LT Clip: First 100pct No-Solder Kit For Liteon DVD On Sale - I (Read 162 times)