Topic: Xecuter LT Clip and LT Switch v2 - Final Images (Read 219 times)

Xbox-Scene · « **on:** June 16, 2010, 06:22:00 PM »

Xecuter LT Clip and LT Switch v2 Final Images
Posted by XanTium | June 16 20:22 EST | News Category: Xbox360

(IMG:http://www.burstnet.com/cgi-bin/ads/ad9520b.cgi/ns/v=2.1S/sz=300x250A/

Quote

Production has just begun so we will give you a delivery date shortly.
(IMG:http://pictures.xbox-scene.com/xbox360/xecuter-lt-clip/LT_CLIP-22-200.jpg)

This kit has been designed with the beginner in mind. It's been in development for a while due to the absolute precision and stability needed to make sure it works for the the lifetime of the DVD Drive with no soldering or glue for trace repairs. We have even included a built in continuity tester to make sure your trace cuts are perfect.

Installation is simple. Make 3 trace cuts (The same as LT Switch v1.X), fit the LT Clip PCB to the Liteon PCB and use the continuity test button to make sure your cuts are correct (Green LED = Good, Red LED = bad). Once you have a Green LED you then fit the specially designed clip to fix the PCB in place. That's it !

The LT Clip can be used with either the new LT Switch v2 or the CK3 Probe II. The first batch will be shipped bundled with the LT Switch v2 and then there will be options later.

We expect the cost for the complete LT Clip & LT Switch v2 bundle kit to be no more than $19.95.
* If you are skilled and can solder then you can use the LT Switch v1.5
* If you are a multiple modder who can solder but wants to be fast and cost effective then you have the CK3 Probe II
* If you are a beginner who has no soldering skills or equipment, doesn't want to buy or use conductive glue and doesn't want the expense to post their console to someone for modding - then the LT Clip solution is perfect for you.

Now everyone has a solution to meet their skills and budget.

Full Story with more pics and install info: team-xecuter.com

tbb033 · « **Reply #1 on:** June 16, 2010, 07:24:00 PM »

Yeah... I'm not thinking beginners are gonna be as well served by this as they try to make it sound, what with trace cuts and all.

red_ring_of_box · « **Reply #2 on:** June 16, 2010, 07:53:00 PM »

kinda bad timing with the release of the new slim 360 isn't it? I mean Im sure it wasn't planned but if it is a new DVD drive revision that patches the MRA hack then this will only be usable for the 360s that have now been put out of production. Just a thought.

bubbafett4hire · « **Reply #3 on:** June 16, 2010, 08:37:00 PM »

QUOTE(red_ring_of_box @ Jun 16 2010, 09:53 PM)

kinda bad timing with the release of the new slim 360 isn't it? I mean Im sure it wasn't planned but if it is a new DVD drive revision that patches the MRA hack then this will only be usable for the 360s that have now been put out of production. Just a thought.

My thoughts also but i am sure there are many retailers that are going to have a price cuts or something on the old style 360's due to demand of the new style system

letsmod · « **Reply #4 on:** June 16, 2010, 09:48:00 PM »

I must admit looks nice. From the videof the slim x360, looks like a liteon drive, will find out soon, bestbuy will begin selling the slim on saturday here in california according to a friend I have that works at the nearest bestbuy

xc1234 · « **Reply #5 on:** June 17, 2010, 08:23:00 AM »

i dont think "easy for beginners" and "trace cuts" should be put in the same paragraph.

BoNg420 · « **Reply #6 on:** June 17, 2010, 09:27:00 AM »

QUOTE(xc1234 @ Jun 17 2010, 10:23 AM)

i dont think "easy for beginners" and "trace cuts" should be put in the same paragraph.

If you can do the trace cuts and soldering of these, then you should be able to solder on wire and a switch I would think? I see more people mess up these installs to anyways then just doing MRA.

alwaysonjohn · « **Reply #7 on:** June 17, 2010, 09:46:00 AM »

The kit looks to be of pretty good quality. I don't trust no solder mods either, but I am glad Xecuter is going back to doing what they do best. Good, high quality chips.

lang · « **Reply #8 on:** June 17, 2010, 12:24:00 PM »

Does this means its possible for me to retreve my dvdkey from a burned dvdrom.
Nothing much is burned, it even started to work once but failed again.
I hate soldering, not a steady hand (IMG:style_emoticons/default/smile.gif)
'

Dre@m · « **Reply #9 on:** June 17, 2010, 01:35:00 PM »

We already have a solderless LT Fakir. IoI

LT Fakir Reply 319

This post has been edited by Dre@m: Jun 17 2010, 08:37 PM

skidude2121 · « **Reply #10 on:** June 18, 2010, 06:57:00 PM »

Is the chip xbox live safe, as in undetectable by M$?

vb_encryption_vb · « **Reply #11 on:** June 18, 2010, 07:17:00 PM »

QUOTE(lang @ Jun 17 2010, 02:24 PM)

Does this means its possible for me to retreve my dvdkey from a burned dvdrom.
Nothing much is burned, it even started to work once but failed again.
I hate soldering, not a steady hand (IMG:style_emoticons/default/smile.gif)
'

No..........

QUOTE(Dre@m @ Jun 17 2010, 03:35 PM)

We already have a solderless LT Fakir. IoI

LT Fakir Reply 319

And how is that solderless?

QUOTE(skidude2121 @ Jun 18 2010, 08:57 PM)

Is the chip xbox live safe, as in undetectable by M$?

It's not a modchip.....just a chip to help ppl that can't solder...in theory it will repair the trace cuts....

IMO more xexcuter crap that they come up with but never release....

nitz0 · « **Reply #12 on:** June 19, 2010, 07:51:00 AM »

QUOTE(red_ring_of_box @ Jun 16 2010, 08:53 PM)

kinda bad timing with the release of the new slim 360 isn't it? I mean Im sure it wasn't planned but if it is a new DVD drive revision that patches the MRA hack then this will only be usable for the 360s that have now been put out of production. Just a thought.

There are still going to literally be hundreds of thousands of the older style xbox 360's around to play with. Not everyone will have the new slim so as the timing somewhat sucks for Xecuter, it will still bring in plenty of profit nonetheless.

Author Topic: Xecuter LT Clip and LT Switch v2 - Final Images (Read 219 times)