Topic: E71>e79 1033> 0022 (Read 37 times)

ZXCVASDFQWER · « **on:** June 10, 2010, 10:50:00 AM »

So a few months ago my xbox 360 would freeze during gameplay or movie playback or even in the dash, then I got an E79/1033 error for a while. Tried the southbridge x-clamp fix with no luck, tried the hybrid x clamp fix on top of that, no luck, bought a heat gun, heatgunned the hana, southbridge, cpu, gpu and ram chips.. now i get a 20-30 second delay on startup and then 3 red lights with an 0022 error code. Heat gunned again, still same error.. Any ideas? or is this box trashed?

ZXCVASDFQWER · « **Reply #1 on:** June 10, 2010, 11:19:00 AM »

I forgot to add that the second time, i made sure to inspect and clean the whole board for any thermal compound that may have gotten on it, dont see any broken traces either. Does this need a reball? or should i just spend the $100 bucks and get a used 360 from someone else

nitz0 · « **Reply #2 on:** June 10, 2010, 05:01:00 PM »

The problem where you went wrong was taking a heat gun to it. It sounds like you ruined the solder balls(bridged) the solder under the BGA's. A Reball of the GPU will more than likely correct this problem. There is nothing else that you can do. My advice is to get a Reball or sell it and move on.

ZXCVASDFQWER · « **Reply #3 on:** June 10, 2010, 07:00:00 PM »

for future reference, what should i have done in that situation?

superfireball123 · « **Reply #4 on:** June 11, 2010, 08:08:00 AM »

And maybe its not the GPU maybe its the TSOP considering that is possibly part of the error

nitz0 · « **Reply #5 on:** June 11, 2010, 09:52:00 AM »

QUOTE(superfireball123 @ Jun 11 2010, 09:08 AM)

And maybe its not the GPU maybe its the TSOP considering that is possibly part of the error

Yeah that's probably not the case with this console. TSOP-0022-JTAG'n=Yes Heatgunning=0022=No TSOP Error

Author Topic: E71>e79 1033> 0022 (Read 37 times)