xboxscene.org forums

Author Topic: What Stops A 1.6 Mobo Fitting Into An Older Case  (Read 63 times)

cartman

  • Archived User
  • Newbie
  • *
  • Posts: 19
What Stops A 1.6 Mobo Fitting Into An Older Case
« on: April 18, 2005, 09:48:00 AM »

Hi, anyone here know what is stopping my 1.6 xbox mainboard fitting correctly in a 1.1 case, must be something simple , if anyone can help out it would be much appeciated , and let me know to to sort it out

cheers

cartman :unsure:
Logged

seriouslysilly

  • Archived User
  • Sr. Member
  • *
  • Posts: 339
What Stops A 1.6 Mobo Fitting Into An Older Case
« Reply #1 on: April 18, 2005, 10:34:00 AM »

you'll have to shave some of the top from the two posts next to the AV slot.
Then you'll either have to bend back the metal from the extra post that the 1.6 mobo doesn't use or cut it off (it's your choice).
If you leave this metal tab on and turn on the 1.6 mobo, you'll fry a transistor so make sure you break that connection
otherwise, you'll have to desolder and replace a tiny part on the mobo.
not that difficult but is easily avoidable
Logged

cartman

  • Archived User
  • Newbie
  • *
  • Posts: 19
What Stops A 1.6 Mobo Fitting Into An Older Case
« Reply #2 on: April 18, 2005, 10:52:00 AM »

thanks for the reply , done what you have suggested , just re assembling it

 :)
Logged

cartman

  • Archived User
  • Newbie
  • *
  • Posts: 19
What Stops A 1.6 Mobo Fitting Into An Older Case
« Reply #3 on: April 18, 2005, 11:33:00 AM »

thanks seriously silly , works fine now :D
Logged