Topic: X-clamp Fix Worked For 3 Months Now Same Problem But Can't Fix 3 R (Read 294 times)

Big Chris 75 · « **on:** February 21, 2010, 01:21:00 PM »

My Xbox 360 crapped out on me again. I previously had the E-74 error so I bought the X-clamp fix and everything was great for 3 months then one morning i woke up and had 3 RROD.....i tried to remove the bolts from the fix and scraped off the old arctic silver paste and reapplied with a new tube but no luck...I don't have video or audio at all....could it be the video cable is just bad??? Was asking before I went out and bought a new one if not having the AV Cable in would cause the 3 RROD or should I just go through the ENTIRE process over with a new box?

So annoyed at this point.

WorldFormula · « **Reply #1 on:** February 21, 2010, 05:58:00 PM »

It probably just broke again, chances are the cables are fine. Try a hybrid fix, and if that doesn't work you're going to need a reflow.

MadMaxGR · « **Reply #2 on:** February 22, 2010, 01:26:00 AM »

QUOTE(Big Chris 75 @ Feb 21 2010, 10:21 PM)

My Xbox 360 crapped out on me again. I previously had the E-74 error so I bought the X-clamp fix and everything was great for 3 months then one morning i woke up and had 3 RROD.....i tried to remove the bolts from the fix and scraped off the old arctic silver paste and reapplied with a new tube but no luck...I don't have video or audio at all....could it be the video cable is just bad??? Was asking before I went out and bought a new one if not having the AV Cable in would cause the 3 RROD or should I just go through the ENTIRE process over with a new box?

So annoyed at this point.

What is the secondary code?

Acton1 · « **Reply #3 on:** February 22, 2010, 02:43:00 AM »

I would do a full reflow and also flux under the chip's

then redo xclamp's

hope this help's

gamestationohio · « **Reply #4 on:** February 02, 2020, 05:43:00 PM »

PM me if you want a professional Reflow.

Author Topic: X-clamp Fix Worked For 3 Months Now Same Problem But Can't Fix 3 R (Read 294 times)