xboxscene.org forums

Pages: [1] 2 3 4

Author Topic: Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD  (Read 628 times)

Xbox-Scene

  • Archived User
  • Hero Member
  • *
  • Posts: 4299
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« on: January 05, 2010, 01:41:00 PM »
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD Drives
Posted by XanTium | January 5 15:41 EST | News Category: Xbox360
 
From team-xecuter.com:
Quote

After a great deal of requests we have designed a simple switch for all the Liteon drives that enables firmware full read/write. We have also included an On/OFF Led to show correction operation when switching to 0×72 vendor mode.

The installation is very simple and takes about 60 seconds if you have some small experience with a soldering iron. It has been tested with the original DOSFLASH methods and also the new Jungle Flasher 0.1.69. All Liteon drive version have been tested with 100% Success. There is no need to remove the LT Switch after it has been installed - simply switch to normal mode.

On Sale Now £4.95 / $7.95

Buy Now: mrmodchips.co.uk | ck3.co.uk
Official Site: http://team-xecuter.com



Logged

leorimolo

  • Archived User
  • Sr. Member
  • *
  • Posts: 269
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #1 on: January 05, 2010, 01:43:00 PM »
If you have to cut the trace then I dont think alot of people would benefit from this, cutting traces is hard as hell.
Logged

Biaz

  • Archived User
  • Jr. Member
  • *
  • Posts: 89
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #2 on: January 05, 2010, 01:48:00 PM »
It looks like it takes cares of the trace cutting for you!

"60 second install"
Logged

k0mpresd

  • Archived User
  • Sr. Member
  • *
  • Posts: 289
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #3 on: January 05, 2010, 01:50:00 PM »
the trace in that picture still looks cut.
Logged

niai

  • Archived User
  • Sr. Member
  • *
  • Posts: 331
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #4 on: January 05, 2010, 01:55:00 PM »
i dont think this is going to sell to good as the people that will use this method will just use wire as its a lot cheaper
Logged

Reaper527

  • Archived User
  • Hero Member
  • *
  • Posts: 2066
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #5 on: January 05, 2010, 02:18:00 PM »
i like the gimmick of adding "LT" to the product name tongue.gif
Logged

mingy83

  • Archived User
  • Newbie
  • *
  • Posts: 3
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #6 on: January 05, 2010, 02:21:00 PM »
uhh yeah especially since its a flimsy little pcb with a switch, led and a resistor and you still have to cut your traces, team xecuter is ripping people off at $8 a pop seems like they haven't been doing much this generation.
Logged

tstein

  • Archived User
  • Newbie
  • *
  • Posts: 25
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #7 on: January 05, 2010, 02:25:00 PM »
QUOTE(mingy83 @ Jan 5 2010, 03:21 PM) View Post

uhh yeah especially since its a flimsy little pcb with a switch, led and a resistor and you still have to cut your traces, team xecuter is ripping people off at $8 a pop seems like they haven't been doing much this generation.


I will personally continue to use wire and a switch.  However, I think Xecuter has been great at supporting the Xbox community with good products over the years.  Not useful for most, but this product has its place IMO.
Logged

skyliner99

  • Archived User
  • Full Member
  • *
  • Posts: 105
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #8 on: January 05, 2010, 02:45:00 PM »
this actually looks fairly useful... takes some of the mess out of reading the drive key. Still not a real noob solution but I like the idea. I may see myself investing in one of these if live ever becomes safe again.
Logged

deilzfcjk

  • Archived User
  • Hero Member
  • *
  • Posts: 1213
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #9 on: January 05, 2010, 02:49:00 PM »
it will be very hard. I know. I remember the v1.6 LPC rebuild boards for the xbox1. This involves the cut trace and soldering onto the thin strip of exposed copper trace. If you have alot of experience it will help alot. Just a forewarning.  pcb overlays are bitches to get on.
Logged

shtewps

  • Recovered User
  • Full Member
  • *
  • Posts: 154
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #10 on: January 05, 2010, 02:56:00 PM »
as others have said, only useful if it doesn't require trace cutting and does not need to be installed for the drive to operate thereafter (this way it could be removed and used on other drives to acquire the key).

so you are still trace cutting, and you are still soldering.. sorry but why do people want this, again?
Logged

neonkoala

  • Archived User
  • Newbie
  • *
  • Posts: 1
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #11 on: January 05, 2010, 03:23:00 PM »
QUOTE(shtewps @ Jan 5 2010, 09:56 PM) View Post

as others have said, only useful if it doesn't require trace cutting and does not need to be installed for the drive to operate thereafter (this way it could be removed and used on other drives to acquire the key).

so you are still trace cutting, and you are still soldering.. sorry but why do people want this, again?


Because it has a nice flashy LED of course...
Logged

HOMiE7

  • Archived User
  • Jr. Member
  • *
  • Posts: 76
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #12 on: January 05, 2010, 03:27:00 PM »
Same devices:
Russian version
German version

This post has been edited by HOMiE7: Jan 5 2010, 11:31 PM
Logged

Riffy

  • Archived User
  • Newbie
  • *
  • Posts: 12
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #13 on: January 05, 2010, 03:45:00 PM »
QUOTE(Reaper527 @ Jan 5 2010, 03:18 PM) *

i like the gimmick of adding "LT" to the product name (IMG:style_emoticons/default/tongue.gif)


Haha glad someone else thought the same thing, besides you'll still get banned so why do all the effort when you can just use an older drive. Hell banned ones are cheap as hell.
Logged

Blargharg

  • Archived User
  • Jr. Member
  • *
  • Posts: 62
Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD
« Reply #14 on: January 05, 2010, 04:40:00 PM »
Actually, it seems with this thing installed reconnecting cut traces is no longer required (if you don't take it off of course). I can see this being useful, but 8$ is too much. Now, if it were 5 or less I'd definitely go with this method for all my customers.
Logged
Pages: [1] 2 3 4
« previous next »