I have been looking at quite a few tutorials online to flash the nand on the 360 after getting banned last week to regain the ability to rip games to the hdd. However the only way I have found to do this is with the LPT port and that will take about a day and a half to do with the 512MB board. I saw that people were using the LPC2148 but there is really no explanation on how to go about using it to flash the nand.
From what I understand I do not need to connect any resistors or diodes to the 360 if I use the LPC2148. I was planning on getting this thing off of ebay (
link).
Basically I have few questions regarding the process.
1. Is the board that I posted from ebay something that will work for this?
2. Do I need to use any resistors/diodes if I get the LPC2148?
3. I read that the LPC2148 needs to be flashed, will I need to get anything to do that?
4. I know the JTAG hack cannot be done with the latest update, but can the uncripple hack work with the latest updates?
Sorry for the long post, but I couldn't really find anything that explained how to use the LPC2148 with a 360 and after reading many posts on forums, the people that used the LPC2148 didn't really explain what they did.
just for starters...the lpt trick to read/write the nand may take the longest..but it's the cheapest way to do it...
the LPC2148(for USB) also needs a board to program it to work with the hack......
and if your not worried about money just go for the infectius2 with the add on ...I'd say use the Cygnos360 V2 but i don't think it supports 256-512 jasper boards yet....