Topic: Liteon V2? Dg-16d2s Fw:83850c (Read 1654 times)

sowa99 · « **Reply #45 on:** June 10, 2009, 03:25:00 PM »

http://www.xbox.is.n...es/DSC00253.JPG

Here is lite from march too, still with old firmware.
Xbox come few days ago from warranty, from Germany.

Regards, Sowa

LEON007 · « **Reply #46 on:** June 10, 2009, 03:30:00 PM »

QUOTE(carniver @ Jun 10 2009, 06:54 PM)

I think they're heading to the right direction with the liteon. Make the process as painful and costy as possible, the hackers cannot afford this by themselves for very long. One day when the hackers have to set up PayPal accounts to collect donations, then they can get a court order to have paypal reveal the names of all the hackers.

For now they can remove the function to dump the key from their firmware?

Isn't that JF hade the paypal button from long time?? From your logic C4E and crew is in jail already.

deilzfcjk · « **Reply #47 on:** June 10, 2009, 03:51:00 PM »

you can't currently dump the firmware from any liteon. It was got from other means. Like with acid and decapping the IC controller chip. The hacked liteon is a shell or dummy if you will that we apply our keys to. So, the fact that you state that the key can be dumped via firmware is not correct. The firmware gets dumped via the Rs232 serial connection, ie it doesn't come along with the firmware from the drive? The firmware is not dumped via any software, ie J/F, xtractor, or Xecuter software reader.

Mr.RedRing · « **Reply #48 on:** June 10, 2009, 05:17:00 PM »

QUOTE(APE @ Jun 10 2009, 02:36 AM)

I flashed one of these last night, manufactured in March 2009. Had problems with getting the tray in the right position the first time (unusual for me) but it got all the data it needed without any complaints.

PEKAC is my guess. Not like most people posting around here really understand what they're doing.

Same here. I thought it was odd at first, but upon opening it up it looked exactly the same. Took me two tries to get the tray in the right position. I do this almost everyday so it was an unusual situation for me as well. The second time it flashed fine.

I don't think it is anything to worry about. That same system has a new southbridge chip though, it is solid black without the silver circle. Instead of it saying Xbox 360 inside of the little silver circle, the silver circle was gone, the whole chip was bigger and solid black.

Bandit5317 · « **Reply #49 on:** June 10, 2009, 10:42:00 PM »

QUOTE(Mr.RedRing @ Jun 10 2009, 06:17 PM)

Same here. I thought it was odd at first, but upon opening it up it looked exactly the same. Took me two tries to get the tray in the right position. I do this almost everyday so it was an unusual situation for me as well. The second time it flashed fine.

I don't think it is anything to worry about. That same system has a new southbridge chip though, it is solid black without the silver circle. Instead of it saying Xbox 360 inside of the little silver circle, the silver circle was gone, the whole chip was bigger and solid black.

As far as the Southbridge goes, that just means that you have a Jasper motherboard.

LockandLoad12gauge · « **Reply #50 on:** June 10, 2009, 11:32:00 PM »

QUOTE(wawnord @ Jun 10 2009, 10:50 AM)

Thank you Guy for confirming that these DVD-Drives are flashable/readable... SOme Users were freaking out...

Freaking out I say!! Now all these people won't ever to be able to play the plethora of amazing and awesome homebrew titles! Say it ain't so!! Now they'll be stuck with going to the local BB and backing up all that crappy official software...boo hoo.

Exobex · « **Reply #51 on:** June 11, 2009, 03:10:00 AM »

QUOTE(OggyUK @ Jun 10 2009, 06:51 PM)

Many a refurb has come back without this data.

Had one of those last week (my first), manufacture code 91505. Thought I'd buggered up the read the first time, so deleted from PC and tried again, exactly the same. Firmtool reckons the serial number data's incomplete.

modtek · « **Reply #52 on:** June 11, 2009, 03:50:00 AM »

QUOTE(Mr.RedRing @ Jun 11 2009, 09:17 AM)

Same here. I thought it was odd at first, but upon opening it up it looked exactly the same. Took me two tries to get the tray in the right position. I do this almost everyday so it was an unusual situation for me as well. The second time it flashed fine.

I done one of these the other night, with a newer date.

I never had issues with the tray though, key dumped fine through Jungle but i had a few issues when trying to erase before flashing, took 3 tries at it before it worked..

In the end all fine,

Never, ever had an issue with any others

strange...

bobbler · « **Reply #53 on:** June 11, 2009, 08:21:00 AM »

Had one in a returned 360 about a week ago that I was asked to do of these. Had to input the serial data by hand into JF to get it sorted but read the main key with no issues. Flashed fine too...
I didn't notice that odd bulge on the drive casing though, it was like any other Liteon from what I remember of it.

This post has been edited by bobbler: Jun 11 2009, 03:23 PM

Exobex · « **Reply #54 on:** June 11, 2009, 03:49:00 PM »

Had another A0A2 earlier, read and flashed fine, no serial number issues. Looks like the firmware's the problem, not the hardware.

fitsman · « **Reply #55 on:** June 12, 2009, 12:14:00 AM »

Have anyone find a way to dump all the information from new liteon drives so it don't needed to enter it manually.
With little words can we flash the new revision of liteon drives?

A lot of thanks.

anarchy2007 · « **Reply #56 on:** June 12, 2009, 02:17:00 AM »

I've had the serial info reported missing on 3 360 consoles so far, but all 3 of them had been flashed with 1.5 before. I was doing an update to 1.6. Although the serial data was reported missing I had no issues after flashing with 1.6.

Maybe these roms come with referbed consoles i.e. the roms have been reflashed by M$' repair center when referbing.

shadowbroker · « **Reply #57 on:** June 12, 2009, 02:29:00 AM »

I had a liteon last week that i have a bit of trouble flashing. I didnt think to look at the revision you know, but i did eventually flash it. I was having trouble finding halfway on the tray (i dont usually) and was having some problems probing the key, but eventually did.

...i just put it down to flashing after only just waking up at 6am and not having my coffee yet. so i dont know was it a newer drive or did i just have sleep in my eyes? either way i DID get it flashed, just took 2 moments longer than usual.

About the photo showin in 1st post, too bad you cant get the META data in the photos properties, would tell you what camera took it, the ISO, F-stop, DATE, exact second it was taken, ect. maybe if you find the original source it was posted from/to or where its hosted, you will be able to read its meta data. looks like a photo i seen months and months ago in part of a turorial about where to probe, only without the text over the photo.

Dra60nSlayer · « **Reply #58 on:** June 12, 2009, 02:44:00 AM »

What is the diffenence between hardware A0A1 and A0A2 ?
(more than the epoxy)

Exobex · « **Reply #59 on:** June 12, 2009, 03:21:00 AM »

QUOTE(Dra60nSlayer @ Jun 12 2009, 09:44 AM)

What is the diffenence between hardware A0A1 and A0A2 ?
(more than the epoxy)

What epoxy? I didn't run into any epoxy problems doing one, just probed the usual point.

Author Topic: Liteon V2? Dg-16d2s Fw:83850c (Read 1654 times)