Topic: Xecuter Connectivity Kit v3: Details and Picture - Liteon Support (Read 259 times)

Xbox-Scene · « **on:** September 17, 2008, 10:45:00 PM »

Xecuter Connectivity Kit v3: Details and Picture - Liteon Support
Posted by XanTium | September 18 00:09 EST | News Category: Xbox360

(IMG:http://www.burstnet.com/cgi-bin/ads/ad9520b.cgi/ns/v=2.1S/sz=300x250A/

We received details and a picture of the upcoming Xecuter Connectivity Kit v3:

Quote

We have expanded our hugely successful connectivity kit v2 to include complete support for Liteon Drive Key Dumping.
(IMG:http://pictures.xbox-scene.com/xbox360/xecuter-connectivity-kits/connectkit_v3xs.jpg)

Feature List:
- RS232 Support (Liteon Key Dump)
- Power to all XBOX 360 Drives (Hitachi / Samsung / Benq / Liteon)
- Mode-B Switch for Hitachi 59 and Earlier (78/79 Requires Slax)
- Onboard ON/OFF Power Switch
- Onboard Eject Switch
- High Quality Xecuter Design

Pre-Order Now. Release Date September 27th.

Official Site: http://www.team-xecuter.com

bubbafett4hire · « **Reply #1 on:** September 18, 2008, 12:06:00 AM »

Great Job Team Xecuter hopes it works as well as version 2.

i wished they spruced it up some for V3,

something like a nice plastic shell would have been nice but never the less great response to the lite-on drive

D2C MASTER · « **Reply #2 on:** September 18, 2008, 12:17:00 AM »

I just hope the Price is better then the other ones they released

zikronix · « **Reply #3 on:** September 18, 2008, 12:24:00 AM »

people still buy xecuter stuff?

eaglepony · « **Reply #4 on:** September 18, 2008, 12:46:00 AM »

with these new connectivity kits coming out, would you even need to solder anything to get the drive key from the liteons?

kero · « **Reply #5 on:** September 18, 2008, 12:47:00 AM »

Xecuter - i might not be the only on but the on/off switch on my version 2 is very dodgy. On mine if you touch the on/off switch the board looses power. Fidle.bend it a bit more and it comes on again. Apart from that version 2 was great. So im sure 3 will be even better.

brandogg · « **Reply #6 on:** September 18, 2008, 12:52:00 AM »

I have an original "XCK", and it's nice, but it was way overpriced. This thing should be like $5.

Martinchris23 · « **Reply #7 on:** September 18, 2008, 01:50:00 AM »

QUOTE(eaglepony @ Sep 18 2008, 07:46 AM)

with these new connectivity kits coming out, would you even need to solder anything to get the drive key from the liteons?

You'll still need to solder the two bridges as they are disconnected at PCB level.

O_oTheGameo_O · « **Reply #8 on:** September 18, 2008, 02:41:00 AM »

QUOTE(bubbafett4hire @ Sep 18 2008, 08:06 AM)

i wished they spruced it up some for V3,

something like a nice plastic shell would have been nice but never the less great response to the lite-on drive

How would you be able to connect the wires to it then?

Martinchris23 · « **Reply #9 on:** September 18, 2008, 03:38:00 AM »

QUOTE(O_oTheGameo_O @ Sep 18 2008, 09:41 AM)

How would you be able to connect the wires to it then?

The same way most commercial programmers work - you make the sockets available from the exterior of the case

redmercury2006 · « **Reply #10 on:** September 18, 2008, 03:50:00 AM »

hey guys,

I'm just wondering and maybe you could help me out a little bit.

i kind a lost track of those liteon babys (never had one... last one i flashed was a benq drive...) - so is it now possible to extract the liteon key and insert it into a nice sammy or hitachi or whatever drive?

well I'm pretty sure it's possible, cause I've read those articles every now and then about soldering a rs232 interface or something like that... but I've always thought this was just the beginning and it was no way near end-user friendly...

so, to sum it up:

a) buy the new xck v3

solder 2,3,4 wire to your new liteon drive
c) simply as hell extract the drive key
d) inject it into a new drive
e) have fun

well right? maybe someone could correct my statement (the content, not the misspellings

)

FoneFreak · « **Reply #11 on:** September 18, 2008, 04:18:00 AM »

All these clowns have done is taken the HARD WORK of the guys here on xbox-scene.com and AS USUAL commercialised it so that they can make money from other people hard work!!.

same as the clowns selling 4 pieces of rubber for £7 and EVEN that was taken from xbox-scene.com

DONT LET THESE D!CKS RIPP YOU OFF

all the information is here: http://forums.xbox-scene.com/index.php?showtopic=659565

This post has been edited by FoneFreak: Sep 18 2008, 11:21 AM

beasty54 · « **Reply #12 on:** September 18, 2008, 04:54:00 AM »

QUOTE(FoneFreak @ Sep 18 2008, 11:18 AM)

All these clowns have done is taken the HARD WORK of the guys here on xbox-scene.com and AS USUAL commercialised it so that they can make money from other people hard work!!.

same as the clowns selling 4 pieces of rubber for £7 and EVEN that was taken from xbox-scene.com

DONT LET THESE D!CKS RIPP YOU OFF

all the information is here: http://forums.xbox-scene.com/index.php?showtopic=659565

Thats no different to saying all we (XS members) are doing is taking the hard work from the guys responsible for coming up with the hacks and using it to make or save money. I'm sure theres a few guys in here charging for a flashing service because some people aren't confident enough to do it themselves, (although they could if they really wanted) are these guys clowns?? Have you flashed a 360 using the hacks created by others, i'm sure you have so this makes you a clown also ?

Think before you type (IMG:style_emoticons/default/rolleyes.gif)

This post has been edited by beasty54: Sep 18 2008, 11:58 AM

bucko · « **Reply #13 on:** September 18, 2008, 07:24:00 AM »

There web site is down...

I was thinking of buying there PS3 Xtender but I don't know..

stormz · « **Reply #14 on:** September 18, 2008, 01:45:00 PM »

"Think before you type"

age old wisdom

Author Topic: Xecuter Connectivity Kit v3: Details and Picture - Liteon Support (Read 259 times)