Topic: 3 Rrod To 2rrod? (Read 102 times)

skipper132 · « **on:** September 03, 2008, 09:39:00 PM »

ummm im prety sure thats a common problem when the gpu is pysicly cracked soooo.............

Arakon · « **Reply #1 on:** September 03, 2008, 11:21:00 PM »

could be that your heatsinks aren't sitting right. if you replaced the x-clamps, the screws might not be tight enough or your washers are too high.

turbotronic · « **Reply #2 on:** September 08, 2008, 04:26:00 PM »

What Secondary Error Code are you getting? You can go here to help you out better:

http://xe.brothersof.../errorcodes.php

Not sure how to get the Secondary Error Code? Go here:

http://xe.brothersof...?n=geterrorcode

sanil · « **Reply #3 on:** January 07, 2009, 01:15:00 PM »

thanks for the post. i also get that problem.

gimpydingo · « **Reply #4 on:** April 21, 2009, 10:27:00 AM »

If you are using washers get rid of them. That seems to be the biggest issue. As soon as I got rid of them my 360 was all better. 2 RRoD = overheating (strange you don't feel an heat). Just finger tightened the screws, let the unit overheat for 5 mitnues or so, power off, let it cool down then tighten the screws with a screw driver - not too tight!

Miked2003 · « **Reply #5 on:** April 21, 2009, 11:05:00 PM »

It is because the CPU is heating up quickly. I put a fan over it and it stopped from going to 2 red lights.
.

Oh yeh and I'm not sure what to do next, because the GPU wont overheat because the CPU is overheating so quickly.. I re-applied artic silver 5 to it, and it still does the same thing.

Author Topic: 3 Rrod To 2rrod? (Read 102 times)