xboxscene.org forums

Author Topic: Dvd Eject Circuit  (Read 85 times)

dronecz

  • Archived User
  • Newbie
  • *
  • Posts: 17
Dvd Eject Circuit
« on: May 24, 2008, 03:27:00 PM »

Hi, I have one mobo were I can`t open dvd tray because dvd is not recognized in dashboard but I think its hw problem so I need to know were on mobo is circuit wich is managing openinig tray. I meter voltage on mobo and that is ok. Many thanks for reply.
Logged

turbotronic

  • Archived User
  • Newbie
  • *
  • Posts: 22
Dvd Eject Circuit
« Reply #1 on: May 27, 2008, 12:28:00 PM »

Hello.  Have you tried to disassembly your dvd drive to see if it is anything in there?  Here is a tut. on that:

http://www.llamma.com/xbox360/repair/Xbox_...ly_tutorial.htm

Here is a tut. on how to manually open the drive:

http://www.llamma.com/xbox360/repair/manua...box_360_dvd.htm

Something else, could you have a possible firmware issue?  Is all your Xbox 360 parts original (belong together)?

Hope this helps...any.   =)
Logged

dronecz

  • Archived User
  • Newbie
  • *
  • Posts: 17
Dvd Eject Circuit
« Reply #2 on: May 27, 2008, 01:06:00 PM »

QUOTE(turbotronic @ May 27 2008, 07:28 PM) *

Hello.  Have you tried to disassembly your dvd drive to see if it is anything in there?  Here is a tut. on that:

http://www.llamma.com/xbox360/repair/Xbox_...ly_tutorial.htm

Here is a tut. on how to manually open the drive:

http://www.llamma.com/xbox360/repair/manua...box_360_dvd.htm

Something else, could you have a possible firmware issue?  Is all your Xbox 360 parts original (belong together)?

Hope this helps...any.   =)



Hi, I`m sure problem is not in dvd drive. I had dvd mobo in repair shop because I thought the problem is there,board was burned but that guy what was doing this repair swap it for working one but I have stil same problem so that must be in the motherboard. I think that just hw problem so that will not be firmware problem. How I wrote xbox not recognize dvd drive so manual opening is not working as well.

Many thanks for reply
Logged