xboxscene.org forums

Author Topic: Liteon Dg 162ds 74850c: No Video Ouptut When Sata Connected?  (Read 75 times)

iateshaggy

  • Archived User
  • Hero Member
  • *
  • Posts: 906
Liteon Dg 162ds 74850c: No Video Ouptut When Sata Connected?
« on: December 08, 2012, 09:44:00 AM »

open the culprit drive up and take some good pictures of the pcb, sounds like u have a short.
Logged

dougiegillam

  • Archived User
  • Full Member
  • *
  • Posts: 112
Liteon Dg 162ds 74850c: No Video Ouptut When Sata Connected?
« Reply #1 on: December 08, 2012, 09:57:00 AM »

QUOTE(legssmit @ Dec 8 2012, 03:51 PM) View Post

Hello everyone,

I recently dug up my old xbox 360 and decided I wanted to start playing again. I turned the xbox on and I did not get any video output.

Knowing it was flashed, I decided to try to restore it to its original firmware. However, the drive did not show up in JungleFlasher (nforce 3 chipset, used it before to flash this and other drives).

Now I have a weird situation: when I turn the xbox on with the sata cable connected, it does not give any video output. When I connect another drive, it boots fine (but of course does not play any games etc). It gets weirder: when I boot the xbox with the liteon not connected the xbox turns on. Then, when I plug in the sata cable, the xbox shuts down immediatly.

Does anyone know what my problem is? I have absolutely no idea what is going on and hope someone can help me...

Thanks in advance!

Had the same problem many moons ago, it turned out to be a loose sata pin connector on the main board.you will need to check and reflow/solder the connector.
Logged