Print

[xboxdawg]

I would assume that you would plug the probe into the pmt socket to use it to probe to get your key. The unlock sounds like it is for a slim drive.

If you didn't get any documentation, do a yahoo or google search for CK3 and go to the manufacturer's website.

For a liteon drive you basically need to be able to probe the point on the back of the drive's circuit board with a grounded probe and be able to power the whole drive off and on as well as cut the 3v power off and on at a certain point.

This sounds like a hybrid connectivity that lets you do some things with a slim drive. You just need the docs to know what to set it for to extract the key from a liteon using pmt.

Here are the usual steps with a standard CK3:

1. CK3 main power on, 3.3v switch on
2. In Jungleflasher, press Phatkey, then YES
3. 3.3v switch off, connect GND PMT probe to MPX01 on drive
4. turn 3.3v switch on
5. After it says "Extract Complete", remove PMT probe from MPX01
6. CK3 main power off, wait 5 seconds
7. CK3 main power on, press OK
8. Done!

[xboxdawg]

And be sure to read the jungleflasher tutorial. It will give you the other steps depending on what kind of drive you have. For example you'll need to have the drive door half closed when you power up the drive in some cases.