Topic: Xdg3 Disks Still Not Working After 3.0 Update (Read 648 times)

ep99 · « **on:** December 26, 2011, 10:34:00 AM »

Just check C4eva.speaks website for info update.

But here is the info on Liteon 02510c LT+3.0 -
This version adds support for topology data in place of AP2.5 replay data for all XGD3 and AP2.5-active XGD2 backups.

*NOTE: For drives that support AP2.5, all backups containing AP2.5 replay data will need to be patched or re-dumped and re-burned for compatibility with v3.0.

ichigoxxx · « **Reply #1 on:** December 26, 2011, 11:17:00 PM »

QUOTE(stevedawg85 @ Dec 26 2011, 01:24 PM)

I have a Liteon (yellow wire) and updated to 3.0. I used the file LTPlus-0251-v3.0 (right one right?) to update this morning. All older backups work, but games which I have installed the game update for (Revelations, Modern Warfare, Battlefield) do not boot up. I thought 3.0 was supposed to 'fix' this. I don't need to reburn the games do I? I burnt them before the 3.0 update.

u need to re rip, patch and burn them

darthwazza · « **Reply #2 on:** December 27, 2011, 06:33:00 AM »

Right im having problems!! I patch reburnt Forza 4 and it was all working fine. But all of a sudden i put my forza 4 disc in and it doesnt work!! I cant get skyrim or saints row to work either!! Any know whats going on!!

mod_irl · « **Reply #3 on:** December 27, 2011, 08:26:00 AM »

how are you burning these? truncated? or ihas burnt?

darthwazza · « **Reply #4 on:** December 27, 2011, 08:52:00 AM »

Ive got a ihas flashed with burner max and i only use verbatim discs too

mouseym · « **Reply #5 on:** December 27, 2011, 06:19:00 PM »

Clear the cache on your HDD.

darthwazza · « **Reply #6 on:** December 28, 2011, 07:26:00 AM »

QUOTE(mouseym @ Dec 28 2011, 01:19 AM)

Clear the cache on your HDD.

I tried clearing the cache but it still wont boot. Thanks for giving me something to try.
What ive had to do to get it working was burn the game again with topology from forza disc not se the master topology had to do the same with skyrim too.

gameworld · « **Reply #7 on:** December 28, 2011, 07:42:00 AM »

QUOTE(hardie @ Dec 27 2011, 08:15 PM)

For the topology to work:-
You need Dashboard 14699
Drive with Lt+3.0
Topology embedded game disk.

So you saying if i update my xbox 360 to the lastest microsoft dashboard then flash with the 3.0 fw . the new topology wont work?

darthwazza · « **Reply #8 on:** December 28, 2011, 08:15:00 AM »

QUOTE(themightyred @ Dec 28 2011, 02:37 PM)

ok, am confused now.

Reflashed my drives this morning and all worked ok.

Re-patched MW3 and NFS The Run using the generic XGD3 bin file as provided for by C4Eva (thanks for that).

Both games worked fine. Straight boot. no issues.

Tried to apply the same process or both Saints Row 3 and Skyrim and neither work! Am totally confused by this as I've done nothing dfferent from MW3 and NFS!

Anyone else had these issues? If so, what did you do to resolve them (assuming you have resolved them!)

I have the latest dash and the games are burnt using an Ihas burner, so am satisfied that things are all good on that front.

What I'd like to avoid, is wasting Verbatims and time if there is something I'm doing wrongly!

Any help is most appreciated.

Thanks in advance
TMR

I had the same problem with skyrim and saints row.
What i had to do was get topology file from the skrim/saints row discs and use that. C4E master topology didnt seem to work for me other than for mw3. ill pm you a link to where i got mine from. Dont know if im aloud to post on here.

hardie · « **Reply #9 on:** December 28, 2011, 04:15:00 PM »

QUOTE(gameworld @ Dec 29 2011, 12:12 AM)

So you saying if i update my xbox 360 to the lastest microsoft dashboard then flash with the 3.0 fw . the new topology wont work?

Where did I write it wont work ??
It says to work -- doesnt anyone read anymore

Rammieone · « **Reply #10 on:** December 28, 2011, 04:48:00 PM »

Can confirm my Skyrim and Need for Speed The Run Backups work A1 on the New Firmware on my Phat liteon.
Only game i have had an issue doing is the new Batman.

hardie · « **Reply #11 on:** December 28, 2011, 05:50:00 PM »

QUOTE(themightyred @ Dec 29 2011, 08:55 AM)

OK, getting thoroughly tee'd off with this now.

Rayman Origins - patched using the "universal" patch - doesnt work. Same as Skyrim, Same as SR3.

Am not doing anymore now as this "patch" clearly only works on selected titles.

Really hope that someone can point us (me) in the right direction of some individual patches for each title.

I have not had a problem with these games or Batman
Are u sure you are actually injecting the patch into the iso
can be overlooked in XBC as its already ticked to extract - need to tick box to inject

themightyred · « **Reply #12 on:** December 29, 2011, 05:54:00 AM »

QUOTE(hardie @ Dec 29 2011, 02:50 AM)

I have not had a problem with these games or Batman
Are u sure you are actually injecting the patch into the iso
can be overlooked in XBC as its already ticked to extract - need to tick box to inject

Am definitely "injecting" the patch. NFS and MW3 working prove that. I've read elsewhere that people are having issues with Skyrim, SR3 and others, so am completely satisfied tha I'm doing this correctly.

Burning at x2.4, verbatim disks, Ihas burner...so am following ALL the correct procedures on this one too.

Getting massively frustrated. The injection is being done directly into the .iso too, so am not ripping these from a disk

ichigoxxx · « **Reply #13 on:** December 29, 2011, 08:29:00 AM »

re- download the universal patch and try again it happened to me and that how i got it to work.
good luck

kuiponok · « **Reply #14 on:** December 29, 2011, 01:28:00 PM »

I downloaded the 'X360.Topology.Data.2011-12-25' (official) and all the games with troubles in this topic work fine for me.

iHas Burner Max (external) and Verbatim @ 4 speed.

Tested with BenQ and also Lite-on, LT+ v3.0 and the 14699 Dash.

Author Topic: Xdg3 Disks Still Not Working After 3.0 Update (Read 648 times)