Print

[ep99]

I think i saw on Team Xecuter website that they have the topology files for ixtreme LT+ 3.0


Extract from their  website.
There are currently two patches available:
1) XGD2.COD-BO.COD-MW2.Halo-Reach.top.data.v1.bin

SUITABLE FOR THE FOLLOWING GAMES ONLY:
a) Call of Duty: Black Ops
Call of Duty: Modern Warfare 2
c) Halo: Reach (XGD2 ONLY, don’t use this on backups of the XGD3 beta)

These games have the exact same topology and therefore can share the same profile data. This was confirmed by doing at least 35 iterations of profile data for each game and analyzing the results. Over millions of measurements, not a single one deviated from the median by more than 1 degree, and there were no cumulative effects at all. These games are identical in the way they were mastered.

2) XGD3.Profile.ID.F87A804E.top.data.v1.bin

Suitable for all XGD3 games with this disc profile ID:
0C3DF524599094E6CB87ECC8-F87A804E

This covers all current XGD3 releases (at the time of writing) except for the Halo: Reach XGD3 beta.

[kyriaco2000]

QUOTE(kyriaco2000 @ Dec 25 2011, 10:15 PM)

quick question folks, quite simple really and for the sakes of safety for not being banned etc....

i dont go online period and update firmware via usb updates, i dont plan to be using live full stop...now i have a flashed team xecuter pcb successfully to ixtreme version 2.0 my orginal drive was a liteon 0225 drive. My question is this....i have the fully topology patched xgd3 backup rips so i ask.......
while offline with the dash previous to the one just released, can i safely play these patched xgd3 games without worrying that my console will be banned while in offline mode???

any helpful feedback will be appreciated thanks

 anybody help me with this question....thanks

[DMagic1]

QUOTE(ep99 @ Dec 26 2011, 10:50 AM)

I think i saw on Team Xecuter website that they have the topology files for ixtreme LT+ 3.0
Extract from their  website.
There are currently two patches available:
1) XGD2.COD-BO.COD-MW2.Halo-Reach.top.data.v1.bin

SUITABLE FOR THE FOLLOWING GAMES ONLY:
a) Call of Duty: Black Ops
Call of Duty: Modern Warfare 2
c) Halo: Reach (XGD2 ONLY, don’t use this on backups of the XGD3 beta)

These games have the exact same topology and therefore can share the same profile data. This was confirmed by doing at least 35 iterations of profile data for each game and analyzing the results. Over millions of measurements, not a single one deviated from the median by more than 1 degree, and there were no cumulative effects at all. These games are identical in the way they were mastered.

2) XGD3.Profile.ID.F87A804E.top.data.v1.bin

Suitable for all XGD3 games with this disc profile ID:
0C3DF524599094E6CB87ECC8-F87A804E

This covers all current XGD3 releases (at the time of writing) except for the Halo: Reach XGD3 beta.

Thanks for that info.

[GHR]

QUOTE(kyriaco2000 @ Dec 25 2011, 10:15 PM)

quick question folks, quite simple really and for the sakes of safety for not being banned etc....

i dont go online period and update firmware via usb updates, i dont plan to be using live full stop...now i have a flashed team xecuter pcb successfully to ixtreme version 2.0 my orginal drive was a liteon 0225 drive. My question is this....i have the fully topology patched xgd3 backup rips so i ask.......
while offline with the dash previous to the one just released, can i safely play these patched xgd3 games without worrying that my console will be banned while in offline mode???

any helpful feedback will be appreciated thanks

You can try, They won't work. Unless of course you flash the newer v3.0 FW.
In that case, it's as safe as it was before - The challenges are being responded.  

QUOTE(Mr.Gamer @ Dec 26 2011, 07:11 PM)

And also does the previous AP 2.5 patch from ABGX360 influences somehow the patching process with topology data or it is irrelevant? In other words I have an iso. of MW2 already patched with ABGX360, so can it be patched with topology data and will it still be playable or do I have to do a clean rip and than patch it using Xbox Backup Creator?

You don't have to make a new clean rip, the topology data replaces the old AP2.5 sectors.
After injecting run the ISO through ABGX and take a look for yourself    (Don't forget to disable writes though..)

QUOTE(stevedawg85 @ Dec 26 2011, 07:48 PM)

n00b Q:
What program or software do I use to patch the ppf topology file to the .iso?

PPF-O-Matic3

[kyriaco2000]

the xgd3 games wont work with LT 2.0? How comes people were playing them before the release of LT 3.0 and with truncated burns too......im pretty sure they work since peeps have been playing for months without protection online....

im just trying to find out if its logical to believe that me having an xbox with dash version previous to the currently released version will i be able to play these backups with the correct topology or am i still prone to ap2.5 checks with older dash firmware plus LT 2.0?

Has anyone been playing for instance with this configuration and reported success while being in offline mode?

[hollowtip]

QUOTE(kyriaco2000 @ Dec 26 2011, 11:51 AM)

the xgd3 games wont work with LT 2.0? How comes people were playing them before the release of LT 3.0 and with truncated burns too......im pretty sure they work since peeps have been playing for months without protection online....

Recently, releases of XGD3 backups will always work using title update trick, but MS caught on and you're not able to get online using the trick anymore. You can still play the current XGD3 library offline, but online is now impossible with LT 2.0.

[GHR]

QUOTE(kyriaco2000 @ Dec 26 2011, 09:51 PM)

im just trying to find out if its logical to believe that me having an xbox with dash version previous to the currently released version will i be able to play these backups with the correct topology or am i still prone to ap2.5 checks with older dash firmware plus LT 2.0?

Lol, ever since dashboard 2.0.12416.0 came out (more than a year ago) to the public you were "prone" to AP2.5 checks..  

Look - it's simple:
Toplogy data + LTplus v3.0 = Game booting.
Now, if you haven't been online and the silent update didn't get you, you can still remain with LT v2.0, provided that you keep the old AP2.5 replay sectors in place and don't inject the Topology instead.
I hope I made myself clear this time...  

[KiLL CraZy]

Is anyone else having an issue burning the back ups?

I am using an IHAS drive with the burner MAX software installed to it. I have a backup of GOW3 along with NFS the run .iso on my hdd, Im using the new XBC to inject the universal ap2.5 that was released and after doing that I go along with using image burn to burn them, the first 2 times burning GOW3 it took the usual 30-40 mins, it said it was successful but then when I flipped the disc around to see the burn, you can see only like half the disc was actually burned while the rest was blank. Did the same procedure again and went along to burn a 3rd time and this time after saying it was successful again, flipped the disc over, now if show's the whole disc was burned and the game worked.

Then went along to burn NFS the run and same issue, shows half burned after it saying it was successful... it's like a hit or miss or something, and I am using high quality verbatim disc... anyone have an idea why this is happening and how I can get successful burn? thanks!

[uN0pEn]

Thank you for your work C4Eva

[stanleycup]

QUOTE(KiLL CraZy @ Dec 26 2011, 07:52 PM)

Is anyone else having an issue burning the back ups?

I am using an IHAS drive with the burner MAX software installed to it. I have a backup of GOW3 along with NFS the run .iso on my hdd, Im using the new XBC to inject the universal ap2.5 that was released and after doing that I go along with using image burn to burn them, the first 2 times burning GOW3 it took the usual 30-40 mins, it said it was successful but then when I flipped the disc around to see the burn, you can see only like half the disc was actually burned while the rest was blank. Did the same procedure again and went along to burn a 3rd time and this time after saying it was successful again, flipped the disc over, now if show's the whole disc was burned and the game worked.

Then went along to burn NFS the run and same issue, shows half burned after it saying it was successful... it's like a hit or miss or something, and I am using high quality verbatim disc... anyone have an idea why this is happening and how I can get successful burn? thanks!

Open the eprom utility click the Option tab click on clear opc history each time before a burn

[jime13]

QUOTE(mammolo74 @ Dec 25 2011, 08:06 PM)

i Have a PROBLEM! i put Lt+3.0 on my Benq, all seems to be ok, Mw3 starts (ON LIVE), title update ok from live, but when i playing the games STOP and report "disc NOT AUTHORIZED",same identically SKYRIM then my console switch automatically OFF: i have this problem because i use TRUNCATE BURN?

delete the game from the xbox 360 disk and play from the cd will solve your problem.

[hardie]

Many thanks to C4EVA and team for this release  
All works great
Thanks again  

[360modzrus]

QUOTE(stevedawg85 @ Dec 26 2011, 01:48 PM)

n00b Q:
What program or software do I use to patch the ppf topology file to the .iso?

Usually the program comes with the files but its called ppf-o-matic3

[ep99]

Just want to double check...i didn't see any mentioning of Dashboard version support anywhere with LT+ v3.0.

Safe to assume it's 14699 which is the latest?

[KILLIXA]

please LT 2.0 read speed x8 or x4.