Print

[crazygoldfish]

Do you have the key from the original flash, the key never changes.?

Options are.

Flash key onto a replacement drive.

Or

If you don't have the key you can swap the pcb onto another drive, basic solder skills required.

You can flash without the kit, use the Xbox as power source, re intro the drive as it sounds like a partial erase.

If you get statins 0x80 then try re erasing and intro the drive until u get 072 status

[BrutalDrew]

If keys did not change from the update, then yes, I do have the original key.

[crazygoldfish]

I would try and flash it without the fuxored connectivity kit.

Are you seeing the drive in jungle flasher?

Make sure you use the latest jungle flasher and manually load the lt2 firmware?

The sequence should be.

Flash drive back to stock

Update Xbox

Drive will now read as 0251 in jungle flasher.

Erase and flash with lt2

Get original firmware off xbins

[iateshaggy]

sounds like u erased the drive and then crashed your pc.
open jf
select the right port
hit intro
turn on the drive

do that in that EXACT order and you will see your drive.  if it crashes your pc, then u need to read the jf tut or use dos flash 16.

[BrutalDrew]

The thing is my PC never crashed and I didn't even get to the point of erasing the drive, just extracting the key under the DVDKey32 tab using the Ck3 probe, and my drive was no longer detected afterwards. I've also dealt with the PC freezing issue before so I'm aware of the issue there.

I also tried your suggestion with the steps listed, but all I get is "Status 0x7F." I resent vendor intro and it tries for a while and just says device intro failed. At no time does Jungle Flasher recognize the drive.

[shai12]

hit the lite-on erase tab

[BrutalDrew]

Even using the lite-on erase button doesn't do anything. I get the following.

CODE

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.89 Beta (284)
Session Started Sun Nov 13 15:36:00 2011

This is a Wow 64 process running on 2 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 6 windows drives C: D: E: F: G: H:
Found 2 CD/DVD drives E: F:

Loading firmware file D:\My Documents\Xbox 360 Drive Backup\Dummy.bin
MD5 hash:  125a10bc28d9967f171de9698488211f
Inquiry string found
Identify string found
Drive key @ 0xA030 AC631DF6D8DA8EBE38446D88613D0DC2
Firmware Osig: [PLDS    DG-16D2S        7485]
Firmware is:  iXtreme v1.51-12x-              
Loading firmware file D:\Desktop\JungleFlasher.0.1.89.Beta(284)\JungleFlasher v0.1.89 Beta (284)\firmware\LTPlus-025-v2.0.bin
MD5 hash:  0264149996f783b54629c1598072e50e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS    DG-16D2S        0251]
Firmware is:  LT-Plus 2.0                    
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target

Target rev is LT 02510C, serial info not copied

Sending Lite-On-Erase request to port 0xE880
..............
Drive returned Status 0x7F
....................
Device Intro failed!

I power cycle the drive after Status 0x7F and have tried multiple times. I'm going to see if I can get anywhere with DOSFlash, but I really think the drive is fried. That's the only thing that makes sense, especially because power wasn't off when I was using the probe and I don't think I put the probe in the right spot the first time. I was following the JF tutorial, but didn't realize there were new methods and I was following the guide for the new method using the "Phatkey" button and not the legacy method, which I now know can't be used anyway because the drive is a 02510C after the update.

Anyway, I'll try some more and if not looks like I'm going to be buying a new drive. Since mine was originally a 74850C, do I need to purchase a 74850C? Also, since after the update mine is now a 02510C, does that make a difference? Will I be able to just purchase a 74850C then write LTPlus-025-v2.0 on it with my key injected? My dashboard is already up-to-date obviously.

[BrutalDrew]

Tried to use l-o-eras and all I get is Status FFFF and DOSFlash doesn't see my drive at all.

[iateshaggy]

sounds like you are on teh wrong port maybe.  also, did u get your key?  if not, don't ever hit loerase unless u wanna convert your 360 into a dvd player.  do you have the log from the first attempt?

[BrutalDrew]

I'm definitely on the right port as that's the port that I used before when Jungle Flasher detected my drive. Also, even if it was the wrong port, it should still show up in DOSFlash. Now Jungle Flasher or DOSFlash don't see my drive at all. I don't have the log from the first attempt, but I do have the key from a previous backup. I actually went ahead and ordered a new 74850 and my plan is to just flash it with LT+2.0 with my key. If I can still fix this in the meantime it'd be great if you guys have any other suggestions.

[iateshaggy]

either u erased the drive and that is why jf doesn't see it, or you plugged it in upside down and blew the fuses.  maybe crack it open and see if anything looks burned up.

[crazygoldfish]

I would just get a new drive and save my self some pain.

[BrutalDrew]

QUOTE(crazygoldfish @ Nov 14 2011, 11:55 AM)

I would just get a new drive and save my self some pain.

Yup, that's what I ended up doing. Got the new drive to work perfectly without a problem.