Print

[themightyred]

Cant seem to flh my drive. Hmmm..... Can do everything, then get to the part where I needto flash the drive and it saves "error cannot flash drive"

Any clues? I've added this burner to my existing set up, so could it be that I've got 2 burners inside the machine now and one is conflicting with the other?

Any thoughts and help would be much appreciated.

Thanks in advance

TMR

[crazygoldfish]

I've got 2 burners, but the old one is an old sony IDE burner

[gibster70]

if m$ are getting false positives from the civ checks as mentioned, then its not possible for them to ban users truncating the images anyway  

[dreday78]

QUOTE(bucky006 @ Oct 23 2011, 11:38 AM)

Well I was getting everything fail at 50% verification, using iHAS124B.

Crossflashed to iHAS524B still failing at 50%.

Went into Drive advanced setting on imageburn and changed ForceHyperTuning on, OnlineHyperTuning on and Smartburn off, and have no idea what these settings do!!!

Anyway now my discs are burning and verifying 100%, No idea if its because I changed these setting or not, but I'm now happy.

Using AonePLUS DL's, very cheap.

My Windatas were failing also. I tried these settings and still failed.  I turned Smartburn back on, along with Force Hyper Tuning and Online Hyper Tuning, and it verified 100%, so I no longer have 60 useless disc anymore hopefully.

[bigballs5]

QUOTE(bucky006 @ Oct 23 2011, 05:38 PM)

Well I was getting everything fail at 50% verification, using iHAS124B.

Crossflashed to iHAS524B still failing at 50%.

Went into Drive advanced setting on imageburn and changed ForceHyperTuning on, OnlineHyperTuning on and Smartburn off, and have no idea what these settings do!!!

Anyway now my discs are burning and verifying 100%, No idea if its because I changed these setting or not, but I'm now happy.

Using AonePLUS DL's, very cheap.

Im trying that now, as I was having no luck with Aones.

[Spider22]

I flash the iHAS 124B with iXtreme Burner MAX then i try to burn the my copy of Batman Arkham City at 22% imgburn give me an error "Inwalid adres for write"  

I used MKM-003 without OPC speed at 2.4x whats wrong?

[lrod2344]

I have the iHAS124-04 from New Egg.... 3 of them actually.... also bought the (very expensive) Verbatim MKM-001 DL Discs from Amazon.... flashed the drive following the official tutorial... didnt change ANY settings and also turned OFF OPC according to the tutorial... burned about 6 titles at 2.4x speed all 100% with 100% verification. it was expensive but worth it I guess.... Burning Arkham City right now.... at 99% Verification.


I will try to mess around with some settings and see if any of these TDK's verify OK.... I can still use them to burn XGD2 titles tho so they are not useless yet.


Thanks to everyone who busted their asses to get this up and working... especially C4E...


PS: Im on Windows 7 Professional 64 Bit with 6gb Mem. and Only 1 burner Installed and Intel ICH10 chipset.

[tullyfish]

Might be an idea for someone to create a post in the relevant forum, so everyone can add:

I tried X media at X speed with X settings.  It worked/gave errors.

QUOTE(gibster70 @ Oct 23 2011, 07:26 PM)

if m$ are getting false positives from the civ checks as mentioned, then its not possible for them to ban users truncating the images anyway  

Well they could - but then they have the embarrassment and bad PR of unbanning people and giving them compensation.  That latest ap25 fiasco was the first time the company line changed from "Enforcement team is never wrong, it is impossible to reverse a ban" to "We dun fukked up!"

[bucky006]

QUOTE(bigballs5 @ Oct 23 2011, 08:31 PM)

Im trying that now, as I was having no luck with Aones.

I'm on my 5 good burns now. no failures.

switching smartburn back on for next one, see if it still works.

[Spider22]

Did you select .dvd file or .iso file to burn?

[heartshacker]

I am having HP DVD Writer 1260r MH22 and planning to cross flash  with iHAS124B or iHAS524B? Anybody have any idea that will it work? If it does not work is there any way I can revert back to my original firmware.

Hope there will be a way to do so. Also expecting there will be some list of cross flashing compatibility list of DVD.

[bucky006]

always burn from the .dvd, it contains the layer break info.

[danthaman673]

QUOTE(bucky006 @ Oct 24 2011, 02:08 AM)

Well I was getting everything fail at 50% verification, using iHAS124B.

Crossflashed to iHAS524B still failing at 50%.

Went into Drive advanced setting on imageburn and changed ForceHyperTuning on, OnlineHyperTuning on and Smartburn off, and have no idea what these settings do!!!

Anyway now my discs are burning and verifying 100%, No idea if its because I changed these setting or not, but I'm now happy.

Using AonePLUS DL's, very cheap.

yeah it might help tune for different media as it's using a finer pitch, I think it prolly just kinda calibrates on the fly somewhat.. as long as it doesn't interfere with any of the Burner-Max FW ... (50% is the layer-break so it kinda makes sense)
 I suspect we will find some brands better than verbs for this (eventually) as many of the cheaper made ones now have thicker edges etc. I've had some really bazzre stuff happen during burns even before this new 'Burn-Ware' ..  I'm glad it's not my bluray burner copping it.. These lightscribes are a good choice as they can put writing on the edges and 'erase' existing +R data etc.. I would guess the later ones are same but better laser (or better heat handling etc..) so I would guess they might not last as long as the natives..

[dangerouseddy]

QUOTE(Spider22 @ Oct 23 2011, 07:31 PM)

I flash the iHAS 124B with iXtreme Burner MAX then i try to burn the my copy of Batman Arkham City at 22% imgburn give me an error "Inwalid adres for write"  

I used MKM-003 without OPC speed at 2.4x whats wrong?

try burning at 4x  sometimes high speed discs burn worse when burnt at low speeds.

[bigballs5]

QUOTE(bigballs5 @ Oct 23 2011, 07:31 PM)

Im trying that now, as I was having no luck with Aones.

From bucky006
Went into Drive advanced setting on imageburn and changed ForceHyperTuning on, OnlineHyperTuning on and Smartburn off, and have no idea what these settings do!!!

Oh yeah that works great 100% on FORZA 4

Thankyou everyone

IHAS 224B
Aones
4x