Topic: C4E's iXtreme Burner MAX v1.0 and iXtreme LTplus v2.01 Samsung (Read 3967 times)

paulbrannan · « **Reply #45 on:** October 23, 2011, 09:29:00 AM »

QUOTE(tullyfish @ Oct 23 2011, 04:21 PM)

I think that was the idea, will have to see what results other get. although I did here ppl with retail having some problems with F4.
I would avoid play. Pll have phoned them and they do not expect stock this month. That "4-5 days" is BS.

Ppl have been happy buying from ebuyer, novatech, btshop, dabs, scan and CCL. All B stock.

What about this one? http://www.digitechs...vdrw-13259.html

nik138 · « **Reply #46 on:** October 23, 2011, 09:40:00 AM »

For Those of you who cant get a iHAS24 B you can use the HP 1260t BH21(fw) .

I flashed mine and it works just perfectly and now is detected as iHAS24B .It used the same chipset.

Cheers
Nik

vegasmtv · « **Reply #47 on:** October 23, 2011, 09:50:00 AM »

I've read you need this to make 100% copies. But everything i burnt, including forza, arkham city, rage and battlefield 3 all work fine by installing to hdd. im already banned so not bothered about live.

Do i really need this??

If so anyway to use it on my macbook?? has no sata. My pc has a sata card which i connect my ck3 pro to. will that work?? thanks

J-UNIT · « **Reply #48 on:** October 23, 2011, 09:52:00 AM »

Is there a tutorial for the flashing procedure?

Exobex · « **Reply #49 on:** October 23, 2011, 10:07:00 AM »

QUOTE(tullyfish @ Oct 23 2011, 04:21 PM)

I would avoid play. Pll have phoned them and they do not expect stock this month. That "4-5 days" is BS.

Ppl have been happy buying from ebuyer, novatech, btshop, dabs, scan and CCL. All B stock.

Ordered mine last Tuesday for next-day delivery (Wednesday). eBuyer posted it Friday, it'll arrive sometime next week.

QUOTE(J-UNIT @ Oct 23 2011, 04:52 PM)

Is there a tutorial for the flashing procedure?

Yes, it's in the pack with the firmware.

Ruined · « **Reply #50 on:** October 23, 2011, 10:17:00 AM »

Just curious - do I need to flash to stock before upgrading from 2.0 to 2.1 LT+?

tullyfish · « **Reply #51 on:** October 23, 2011, 10:36:00 AM »

QUOTE(Ruined @ Oct 23 2011, 05:17 PM)

Just curious - do I need to flash to stock before upgrading from 2.0 to 2.1 LT+?

not unless you are also updating the dashboard.

bucky006 · « **Reply #52 on:** October 23, 2011, 10:38:00 AM »

Well I was getting everything fail at 50% verification, using iHAS124B.

Crossflashed to iHAS524B still failing at 50%.

Went into Drive advanced setting on imageburn and changed ForceHyperTuning on, OnlineHyperTuning on and Smartburn off, and have no idea what these settings do!!!

Anyway now my discs are burning and verifying 100%, No idea if its because I changed these setting or not, but I'm now happy.

Using AonePLUS DL's, very cheap.

BanditRW · « **Reply #53 on:** October 23, 2011, 10:56:00 AM »

QUOTE(bucky006 @ Oct 23 2011, 12:38 PM)

Well I was getting everything fail at 50% verification, using iHAS124B.

Crossflashed to iHAS524B still failing at 50%.

Went into Drive advanced setting on imageburn and changed ForceHyperTuning on, OnlineHyperTuning on and Smartburn off, and have no idea what these settings do!!!

Anyway now my discs are burning and verifying 100%, No idea if its because I changed these setting or not, but I'm now happy.

Using AonePLUS DL's, very cheap.

I'm using a ASUS DRW-24B1ST that has been cross-flashed to a iHAS324B and this is what I'm getting during the VERIFY process
W 11:26:08 Failed to Read Sector 1901552 - Reason: Logical Unit is in process of becoming ready

cedarpoint2 · « **Reply #54 on:** October 23, 2011, 10:56:00 AM »

Cant seem to get this working. Any help would be appreciated.

Using a Liteon iHAS124B drive. Flashed with iHAS-124B-AL0S-MKM001MKM003-final - flash successful.

Downloaded the latest version of IMGburn, set all setting in IMGburn as prompted in the guide. Using Verbatim MKM003 disks, as soon as I go to burn, get the message not enought room, errors at 97% and then closes track.

Any suggestions?

Zod5000 · « **Reply #55 on:** October 23, 2011, 11:00:00 AM »

If you install the firmware, can you still use the drive for non xgd3 burning, or does it trying to burn all discs in the larger format? (ie for regular burning in programs like nero or what not).

My drive should arrive in the mail tomorrow and I'm trying to figure out if I can swap it out for current burner, or if i need to buy a sata card to make room for another drive.

bucky006 · « **Reply #56 on:** October 23, 2011, 11:35:00 AM »

QUOTE(Zod5000 @ Oct 23 2011, 07:00 PM)

If you install the firmware, can you still use the drive for non xgd3 burning, or does it trying to burn all discs in the larger format? (ie for regular burning in programs like nero or what not).

My drive should arrive in the mail tomorrow and I'm trying to figure out if I can swap it out for current burner, or if i need to buy a sata card to make room for another drive.

Yer, I burnt a CD and a movie on mine just to see,and both worked fine.

metalcoat · « **Reply #57 on:** October 23, 2011, 11:39:00 AM »

Anyone that has RAID on in bios and does not want the hassle of using another pc or installing another OS try here http://www.ixtreme.n...sh-drive-3.html

vishdas108 · « **Reply #58 on:** October 23, 2011, 11:45:00 AM »

QUOTE(metalcoat @ Oct 23 2011, 11:09 PM)

Anyone that has RAID on in bios and does not want the hassle of using another pc or installing another OS try here http://www.ixtreme.n...sh-drive-3.html

any 1 know when is new abgx is rolling out

madsurfer · « **Reply #59 on:** October 23, 2011, 12:11:00 PM »

How can I plug the dvdrw drive to my laptop? I do have a eSATA port.

Thanks

Author Topic: C4E's iXtreme Burner MAX v1.0 and iXtreme LTplus v2.01 Samsung (Read 3967 times)