Topic: C4E's iXtreme Burner MAX v1.0 and iXtreme LTplus v2.01 Samsung (Read 3964 times)

dangerouseddy · « **Reply #390 on:** November 14, 2011, 06:17:00 AM »

QUOTE(DWells55 @ Nov 13 2011, 12:39 PM)

Yup, cleared the OPC history each time I changed a setting in the EEPROM. I really think it's possible I've just gotten two bad drives. I think I might pick up another one, another batch of MKM-003s, and install and flash it in a third computer and see how it goes. If it still doesn't work I'll just consider myself cursed and get an xk3y or something.

you might consider that it could be caused by noise from your pc power supply if you dont have a good quality one. some people on cdfreaks have had problems with dvd writers and fixed them by changing thier psu.

angrykid · « **Reply #391 on:** November 14, 2011, 09:29:00 AM »

all my personal 4x burns on 001 media have been coming out "great" from this HP desktop machine I picked up at WM a couple weeks ago (with the 124B burner from newegg)

angrykid · « **Reply #392 on:** November 14, 2011, 09:43:00 AM »

even if a brand new burn reads fine depending on how high kprobe scans it will be more susceptible to dirty disc errors in the future

DWells55 · « **Reply #393 on:** November 14, 2011, 10:26:00 AM »

QUOTE(dangerouseddy @ Nov 14 2011, 08:17 AM)

you might consider that it could be caused by noise from your pc power supply if you dont have a good quality one. some people on cdfreaks have had problems with dvd writers and fixed them by changing thier psu.

I forget the model off the top of my head, but one of the rigs has a higher-end OCZ power supply and power to it comes in through a power-conditioning battery backup, so I don't think that's the issue.

angrykid · « **Reply #394 on:** November 14, 2011, 12:03:00 PM »

have you maybe tried different sata ports or cables?
my dvd burner is on the primary #1 sata port on my motherboard. theoretically shouldn't make a difference but who knows... I don't mess with success !

angrykid · « **Reply #395 on:** November 14, 2011, 05:43:00 PM »

4x burn with all advance settings enabled in imgburn under lite-on tab.

this is NFS The Run btw

rune-san · « **Reply #396 on:** November 15, 2011, 12:22:00 AM »

No, unfortunately that won't work. That spike is way too high and likely if you're installing to the HDD the Xbox will error out on transfer at the 50% mark. Additionally your PIF is 5 times higher than what it needs to be. Those memorex media are pretty tough to burn on and some people are redoing their firmware with a different one that seems to burn on them better. Do a google search with that disc ID and you'll see what I'm talking about.

angrykid · « **Reply #397 on:** November 15, 2011, 07:16:00 AM »

again another person trying to go against the rules...
there are still non-xgd3 discs being released......... save your discs for that and buy verbs for the xgd3s

rune-san · « **Reply #398 on:** November 15, 2011, 07:06:00 PM »

It's a good quality burn but any errors are completely unacceptable. That means that in 4 different areas the errors are bad enough that no data can be retrieved. This will almost certainly manifest itself somewhere when used in the xbox. You'll need to re-burn still and see if you can get a copy of that quality but with 0 errors. Even 1 error qualifies that disc as a coaster. I'm curious if that disc even verified in ImgBurn? I wouldn't think it would be able to with the errors.

demheels · « **Reply #399 on:** November 17, 2011, 10:31:00 AM »

Here's my third attempt. Everything looks great, except for the PI Average. That's not supposed to be above 5? Does that make this a bad burn?

Date : 11/16/2011 6:23:48 PM
Model : 1-1-1-0 L:ATAPI iHAS124 B AL0S
Disc : DVD+R DL , MBIPG101R10A [Moser Baer India Limited]
Speed : 4x
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 4267023
Sampling count : 250758
Errors : 0
PI Max : 29
PI Average : 7.29
PI Total : 228547
PIF Max : 3
PIF Average : 0.12
PIF Total : 3614

IPB Image

angrykid · « **Reply #400 on:** November 17, 2011, 10:37:00 AM »

nothing wrong with that burn, what media is that? certainly not verbatim!

angrykid · « **Reply #401 on:** November 17, 2011, 01:01:00 PM »

you should really search the forums for kprobe testing procedures but the PI should not peak higher than 100 I believe and the PIF no higher than 5.
here's my latest burn of mw3, not the best disc thats ever come from my drive but certainly not the worst!

IPB Image

angrykid · « **Reply #402 on:** November 17, 2011, 02:04:00 PM »

the average is also very important to look at. try raising or lowering to burn speed and double check results.
different images will give different burn results also.
I dont know how or why but they do

angrykid · « **Reply #403 on:** November 17, 2011, 09:23:00 PM »

all advance options enabled (no opc) with 4x burn no other processes running (except torrent client)

Dark Mod · « **Reply #404 on:** November 18, 2011, 11:30:00 AM »

Well this sucks...I burn one game so far with success and now the second try this morning...only burning at 13% and giving me an I/O error

Using TDK media (never had as problem with them before)
I have a 324B drive I got brand new and modded firmware flashed in successfully

I tried all the hyper and online tuning on, off OPC on and off, even the smartburn on and off and still failure at 13%

is it the media i'm using or the drive on the whole is an epic fail?

Author Topic: C4E's iXtreme Burner MAX v1.0 and iXtreme LTplus v2.01 Samsung (Read 3964 times)