Topic: Liteon iHAS*24 B Rebadges And Crossflashing Info (Read 1281 times)

SFORCES · « **on:** August 29, 2012, 02:41:00 AM »

I have a HP DVD1270I A burner when i load up eeprom utility it says it's a IHAS224A ZL0P 2009/10/06 14:06.
how do i flash this to use the maxburn flash and what flash to i use?

This post has been edited by SFORCES: Aug 29 2012, 09:42 AM

cross_stix · « **Reply #1 on:** August 29, 2012, 09:26:00 PM »

QUOTE(SFORCES @ Aug 29 2012, 04:41 AM)

I have a HP DVD1270I A burner when i load up eeprom utility it says it's a IHAS224A ZL0P 2009/10/06 14:06.
how do i flash this to use the maxburn flash and what flash to i use?

A series drive = incompatible, sorry

If you want you can still crossflash to iHAS224 A or iHAS424 A firmware, but no Burner Max

This post has been edited by cross_stix: Aug 30 2012, 05:18 AM

SFORCES · « **Reply #2 on:** August 30, 2012, 09:33:00 PM »

QUOTE(cross_stix @ Aug 30 2012, 04:26 AM)

A series drive = incompatible, sorry

If you want you can still crossflash to iHAS224 A or iHAS424 A firmware, but no Burner Max

ok thanx. so this can't be use to burn XGM3 then?

Takashi · « **Reply #3 on:** October 09, 2012, 06:15:00 PM »

Not completely, no.

vb_encryption_vb · « **Reply #4 on:** October 17, 2012, 06:44:00 PM »

Wish this page was updated on page 1, ordered an ASUS and apparently got the C chipset.

Takashi · « **Reply #5 on:** February 02, 2020, 07:20:00 PM »

Yeah i ordered 5x of them a month ago, same deal.

vb_encryption_vb · « **Reply #6 on:** October 19, 2012, 05:17:00 AM »

QUOTE(Takashi @ Oct 18 2012, 10:20 PM)

Yeah i ordered 5x of them a month ago, same deal.

Ouch, I assume you sent them back. I'm not wasting the time on sending 1 back. I'll keep it around in case my pioneer 116D ever dies.

Takashi · « **Reply #7 on:** February 03, 2020, 01:02:00 PM »

oh most def sent them back, sources are near dried up now.

ponydawg · « **Reply #8 on:** October 24, 2012, 06:10:00 PM »

i just got an ihas 124 d winbond, sucks i know, is there any burnermax firmware in the works for this model or should i return it?

Kidology · « **Reply #9 on:** November 14, 2012, 02:38:00 PM »

I just bought a Sony Optiarc 5280S-CB-PLUS from amazon. It has native overburn support!! I popped it in the pc and tossed in a memorex blank and tried and xgd3 image and it started the burn right away. did not ask to truncate or overburn or anything. Will let you guys know how it turned out

Kidology · « **Reply #10 on:** November 14, 2012, 03:52:00 PM »

SUCCESS!

Tried 3 games so far, 1 of which is forza 4 which gave me tons of problems no matter what i did and others that randomly froze.

Not a single issue!!

I guess you can go ahead and add this drive to the list however it does not need to be reflashed it works straight out of the box.

Kaiser Zero · « **Reply #11 on:** November 14, 2012, 11:42:00 PM »

Can anyone else confirm the Sony Optiarc works for overburning and has no security lapses at all for playing online?

This would be amazing if it worked natively. Can anyone check with c4eva via IRC perhaps? I have to sleep now for work.

pchop6t9 · « **Reply #12 on:** December 04, 2012, 10:34:00 AM »

Here is the official PDF (remove spaces) h t t p ://www.s o h o - j p .com/common/fckeditor/editor/filemanager/connectors/php/transfer.php?file=/uid000001_41442D353238302D43422E706466

ironman72 · « **Reply #13 on:** December 04, 2012, 11:46:00 AM »

QUOTE(Kidology @ Nov 14 2012, 05:52 PM)

SUCCESS!

Tried 3 games so far, 1 of which is forza 4 which gave me tons of problems no matter what i did and others that randomly froze.

Not a single issue!!

I guess you can go ahead and add this drive to the list however it does not need to be reflashed it works straight out of the box.

Do you have k-probe data for these burns?

pchop6t9 · « **Reply #14 on:** December 04, 2012, 12:41:00 PM »

you can find some k-probe results from h t t p://forum.i m g b u r n.com/index.php?showtopic=20192

second post has some links to burns (8.7 GB burns with kprobe results.)

Author Topic: Liteon iHAS*24 B Rebadges And Crossflashing Info (Read 1281 times)