Topic: Ixtreme Lt Plus 2 0 And 0800 3 0 Firmware Xbox360-ind (Read 2375 times)

AliMoose · « **Reply #30 on:** October 02, 2011, 05:46:00 PM »

I'm not able to get to the c4eva site to download LT+ 2.0 .. is there a new tutorial on how to flash the drive from a 1.91 to 2.0? or is it the same way as always?

hewligun · « **Reply #31 on:** October 02, 2011, 05:47:00 PM »

Question.... I am on LT 1.1 I have not taken my xbox on xbox live since before the may update. my xbox has not had the firmware updated since before the may update.

Can i go straight from LT 1.1 to 2.0? or do i need to update to 1.91 then to 2.0? Should i go to stock firmware and update to latest dash before doing any firmware updates?

SNAAAKE · « **Reply #32 on:** October 02, 2011, 05:47:00 PM »

samsung lt 2.0 still shows as 1.9 in newest jungleflasher. is that normal?

crazygoldfish · « **Reply #33 on:** October 02, 2011, 05:49:00 PM »

Grifter357 · « **Reply #34 on:** October 02, 2011, 05:51:00 PM »

QUOTE(SNAAAKE @ Oct 2 2011, 07:47 PM)

samsung lt 2.0 still shows as 1.9 in newest jungleflasher. is that normal?

When I load the Samsung LT2.0 it shows up as 2.0. Double check you loaded the right LT version. I removed all the older versions of LT from the firmware folder so I don't load the wrong one by mistake.

hyfall381 · « **Reply #35 on:** October 02, 2011, 06:00:00 PM »

just flashed 2.0 to my phat lite-on, using the latest JF that came out about 1 minute ago.

everything is great and my GoW3 backup is running perfect. Thank you!

ivildox · « **Reply #36 on:** October 02, 2011, 06:03:00 PM »

QUOTE(hyfall381 @ Oct 3 2011, 01:00 AM)

just flashed 2.0 to my phat lite-on, using the latest JF that came out about 1 minute ago.

everything is great and my GoW3 backup is running perfect. Thank you!

what settings in imgburn - calculate optimal- layer break?

vv uk garf vv · « **Reply #37 on:** October 02, 2011, 06:11:00 PM »

total noob question time can i use this on a ben-q drive spoofed as an hitachi f59

hyfall381 · « **Reply #38 on:** October 02, 2011, 06:16:00 PM »

QUOTE(ivildox @ Oct 3 2011, 01:03 AM)

what settings in imgburn - calculate optimal- layer break?

Followed the directions on the main page of this site.

Step by Step:
1. Choose "Write image file to disc", and after loading the .dvd file, click "Write".
2. ImgBurn will pop up a notice saying that there is not enough space on the disc to burn the image, and asks if you would like to continue anyway. Click "Yes".
3. Another message might pop up saying that optimal layerbreak position exceeds L0 capacity. Click "Yes".
4. An error will then pop up noting that "Set L0 Data Zone Capacity Failed". Click "Continue".
5. The image will begin writing to the disc.
6. Nearing the end of the write process, ImgBurn will pop up an error at around 97% or 98% (this is what we want -- it's intentional!). Click "Cancel".
7. A notice will then pop up asking if you would like ImgBurn to try and perform the "'Close Track/Session/Disc' functions". Click "Yes".
8. Let the disc finalize, and you're done!

sminitis · « **Reply #39 on:** October 02, 2011, 06:22:00 PM »

QUOTE(hyfall381 @ Oct 3 2011, 11:00 AM)

just flashed 2.0 to my phat lite-on, using the latest JF that came out about 1 minute ago.

everything is great and my GoW3 backup is running perfect. Thank you!

did you run the iso through abgx360?my xbox is banned.do i still use abgx360?

jericko · « **Reply #40 on:** October 02, 2011, 06:30:00 PM »

Just flashed my LiteOn Phat 8 Series and worked like a champ. Tested with###Gears 3. Thanks C4EVA!

chorizo1 · « **Reply #41 on:** October 02, 2011, 06:30:00 PM »

working on a v7 liteon. used latest JF (reports it as 1.1)

lithium210 · « **Reply #42 on:** October 02, 2011, 06:32:00 PM »

QUOTE(dbldown768 @ Oct 2 2011, 03:36 PM)

So does this mean you need a separate liteon drive for ripping? I have an old kreon drive. Are these no longer acceptable from ripping the media?

Can anyone answer this? I also have a samsung pc drive (SH-D162D) modified with kreon.

Aldanga · « **Reply #43 on:** October 02, 2011, 06:35:00 PM »

Kreon drives cannot rip XGD3 discs. They can rip older discs, but neither XGD3 discs nor AP2.5 data can be ripped by Kreon drives.

lithium210 · « **Reply #44 on:** October 02, 2011, 06:38:00 PM »

QUOTE(Aldanga @ Oct 2 2011, 04:35 PM)

Kreon drives cannot rip XGD3 discs. They can rip older discs, but neither XGD3 discs nor AP2.5 data can be ripped by Kreon drives.

thanks for the info. so im assuming there wont be a "kreon" like patch/update for these drives then? I guess i'll just get a spare benq or liteon.

Author Topic: Ixtreme Lt Plus 2 0 And 0800 3 0 Firmware Xbox360-ind (Read 2375 times)