Topic: Lite On 8 Series With Lt+ V1.91, Can Not Play Gear Of War 3 Retail Cop (Read 182 times)

ochentay4 · « **on:** September 28, 2011, 11:17:00 AM »

QUOTE(jericko @ Sep 28 2011, 02:10 PM)

Hello

I have a Xbox phat with a LiteOn 8 series. I recently just flashed it to LT+ v1.91. No problems playing backups or older original discs. I just purchased Gears of War 3, and I know its the new disc format, but since I am on LT+ v1.91 it should boot. Instead as soon as the disc goes in, I get one red light in the lower left quadrant. Does anyone know what that means?

Thanks in advance for the help!
Jason

I assume LT+ 1.91 or 1.92 cant recognize properly XGD3 discs (originals). Flash back to stock till LTMAX 2.0 and see if it works.

jericko · « **Reply #1 on:** September 28, 2011, 11:30:00 AM »

QUOTE(ochentay4 @ Sep 28 2011, 12:17 PM)

I assume LT+ 1.91 or 1.92 cant recognize properly XGD3 discs (originals). Flash back to stock till LTMAX 2.0 and see if it works.

Hello Ochentay4, thanks for the reply. According to http://c4evaspeaks.com/ LT 1.91 "It supports XGD3 originals, but not XGD3 backups." That is why I am not sure why I am getting the red light in the lower left quad.

wes302 · « **Reply #2 on:** September 28, 2011, 03:04:00 PM »

gow3 plays fine on my jasper liteon drive 1.91.

Gazc0igne · « **Reply #3 on:** September 28, 2011, 03:17:00 PM »

id put money on your console originally having a differnet drive than a liteon.....

spoofed drives will fail the new AP2.6 checks.....

been talked about several times in this very subforum.

Jumpy_Beans · « **Reply #4 on:** September 28, 2011, 03:50:00 PM »

Is there an error number on the screen also?
If it still won't boot then I would flash back to stock, test it, if it works I would then reflash 1.91 and test it again. Otherwise use stock for the time being.

Gazc0igne · « **Reply #5 on:** September 28, 2011, 05:03:00 PM »

did you MRA the drive to obtain full fw dump or do a PMT probe dump that only got you a dummy.bin?

astrosaber3 · « **Reply #6 on:** September 28, 2011, 11:49:00 PM »

Have the exact same setup as the OP, and GOW3 works with LT+1.91 here.

I would just reflash LT+1.91 into the drive and try again. It should work.

ep99 · « **Reply #7 on:** September 29, 2011, 12:12:00 AM »

I also have a phats 83850c drive and had been updated with dashboard 13599.

Followed JF guide and used probe 3 to dump a dummy.bin file...flashed to LT+ v1.91 02510 version.

And able to play GOW3...no issue.

Oh...i am also using x360usb pro which is an easy setup.
I am assuming the SATA setup is working for you before...

dsavage · « **Reply #8 on:** September 29, 2011, 02:50:00 AM »

QUOTE(Gazc0igne @ Sep 28 2011, 10:17 PM)

id put money on your console originally having a differnet drive than a liteon.....

spoofed drives will fail the new AP2.6 checks.....

been talked about several times in this very subforum.

any idea if lt 2.0 will fix that ?

or are spoofed drives finished for good ?

lookin for someone to shed light on this.....seems no one knows ?

Spark · « **Reply #9 on:** September 29, 2011, 01:52:00 PM »

I have a v9 and the game stuck at installing on 50% for me the first time I tried to install it but other than that it has worked perfectly. The install problem was fixed just by ejecting and re-inserting the disc.

The disc is really noisy though unless you install the game to your HDD.

QUOTE(dsavage @ Sep 29 2011, 10:50 AM)

any idea if lt 2.0 will fix that ?

or are spoofed drives finished for good ?
lookin for someone to shed light on this.....seems no one knows ?

All 2.0 will do is enable XGD3 DL backups AFAIK, AP2.6 will likely not work on spoofed drives without performing additional operations which is not what LT is designed to do.

hardie · « **Reply #10 on:** September 30, 2011, 12:47:00 AM »

Should have put back to stock first before dash update ( and if me would have redumped drive after dash update to be sure)
Firmware should be 02510C now not 0225
if no luck wait for LT+ 2.0

astrosaber3 · « **Reply #11 on:** September 30, 2011, 01:48:00 AM »

It almost sounds like the OP flashed an earlier version of LT+ accidently, or used the wrong firmware file.

Svantesson666 · « **Reply #12 on:** September 30, 2011, 04:24:00 AM »

QUOTE(astrosaber3 @ Sep 30 2011, 09:48 AM)

It almost sounds like the OP flashed an earlier version of LT+ accidently, or used the wrong firmware file.

I double that. That is exactly what I was thinking.

If you load your dummy.bin file from your 83850c dump JungleFlasher will load the wrong .bin file!
If you load your old dump, you have to manually load the .bin file for the 0251 and then to the erase and write as normal. I can almost GARANTUEE you that this is where you have done wrong.

Oh and don't forget to click spoof to target after loading the new .bin file.

ichigoxxx · « **Reply #13 on:** September 30, 2011, 05:40:00 AM »

QUOTE(jericko @ Sep 28 2011, 11:36 PM)

It was a 8 Series LiteOn so I just used my Sata Card to pull the key w/JungleFlasher.

u cant get Ur keys just with ur sata card u need mra or pmt methods
i agree with the other members u might have the wrong LT firmware on you're drive.

iateshaggy · « **Reply #14 on:** September 30, 2011, 12:37:00 PM »

load dummy, it will try to auto load lt1.1. then manually load 0251 lt1.91 in target. u have to hit spoof to copy the key over, it doesn't actually spoof the osig, it just patches the key over.

Author Topic: Lite On 8 Series With Lt+ V1.91, Can Not Play Gear Of War 3 Retail Cop (Read 182 times)