xboxscene.org forums

Author Topic: Play Dvd On 0225  (Read 76 times)

ankurar

  • Archived User
  • Newbie
  • *
  • Posts: 7
Play Dvd On 0225
« on: August 17, 2011, 06:17:00 AM »
Hi
    as the topic says...i have just flashed a 0225 slim lite on(9504 labled) it had mxic board in it.got the dump sucessfully with the russian hack,then flashed it with LT- plus 1.91,after this my xbox is showing PLAY DVD to both original as well as there back up...i flashed it back to stock again and it started playing original again can't understand where the problem ...any help will be appriciated.thanks
Logged

Gazc0igne

  • Archived User
  • Sr. Member
  • *
  • Posts: 284
Play Dvd On 0225
« Reply #1 on: August 17, 2011, 07:00:00 AM »
you need to use the LTPlus-0225-v1.91u.bin

This post has been edited by Gazc0igne: Aug 17 2011, 02:07 PM
Logged

ankurar

  • Archived User
  • Newbie
  • *
  • Posts: 7
Play Dvd On 0225
« Reply #2 on: August 17, 2011, 07:04:00 AM »
issue solved with LT+ 1,91u...Thanks...
Logged

ankurar

  • Archived User
  • Newbie
  • *
  • Posts: 7
Play Dvd On 0225
« Reply #3 on: August 22, 2011, 04:12:00 AM »
yet another day....same issue again....tried both LT+ 1,91u & LT- plus 1.91..both giving same play dvd error...i think there is some issue with the mislabbeled 9504(0225 inside) with mxic...any ideas from the experts...
Logged

BigSteel

  • Archived User
  • Hero Member
  • *
  • Posts: 577
Play Dvd On 0225
« Reply #4 on: August 22, 2011, 08:13:00 AM »
I have the same issue as you.  It may have to do with the calibration data.  There is a threa about it on the Xectuer website (google '0225 Play DVD').  I haven't tried adjust the calibration data yet, but what seems to work most of the time is powering off the xbox with the tray open and then powering on again.  I am waiting for LT+ 1.92 to see if that helps with the issue.
Logged

ankurar

  • Archived User
  • Newbie
  • *
  • Posts: 7
Play Dvd On 0225
« Reply #5 on: August 23, 2011, 05:39:00 AM »
finally got success after many attempts....finally i used the dummy.bin in the source tab(not the full dump) & lt plus 1.91(not 1.91u) in the soure tab..and now both original as well as there backup are working like a charm...one thingh more that i would like to share is that i tried  adjusting the calibration data with different values but it didn't worked...will post more details when another drive comes...
Logged