Topic: C4Eva iXtreme LT v1.9 for Samsung and LT+ v1.9 for Benq and phat Lite- (Read 1004 times)

mawfuca · « **Reply #105 on:** June 21, 2011, 08:37:00 PM »

I have a weird one. I just flashed my 74850c Lite-On to LT+1.9 and now my VGA cable doesn't work. It's not faulty cable as I just bought it today, and it works with a different 360. I know its not the video port because the RCA cables work. Anybody else have this issue or know how to fix?

This post has been edited by mawfuca: Jun 22 2011, 03:41 AM

deilzfcjk · « **Reply #106 on:** June 22, 2011, 03:57:00 AM »

yeah buy another VGA cable. lol. I do not think that a ODD firmware flash will make your xbox 360 video output not work anymore

mod_irl · « **Reply #107 on:** June 22, 2011, 06:49:00 AM »

QUOTE(deilzfcjk @ Jun 22 2011, 10:57 AM)

yeah buy another VGA cable. lol. I do not think that a ODD firmware flash will make your xbox 360 video output not work anymore

+1, its possible when you flashed it you could have shorted out somethinig on the motherboard that is causing this issue, but a standard flash wont cause this even if you mess it up.

delahmed · « **Reply #108 on:** June 23, 2011, 07:53:00 AM »

Thanks C4e.

Updated my Liteon LT+1.0 back to stock, applied MS update, reflashed to 1.9 LT+.

Works a dream..... stayed offline since the May update so nice to be back on XBL.

Much appreciated.... Bless!

toddgei · « **Reply #109 on:** June 24, 2011, 02:16:00 AM »

I am updating to 1.9 over the weekend.

One question is that when patching games with the new ap2.5 patches do we need clean images of the games or can we just repatch the previous image that was patched for the old ap2.5 challenges ?

dangerouseddy · « **Reply #110 on:** June 24, 2011, 03:45:00 AM »

QUOTE(toddgei @ Jun 24 2011, 09:16 AM)

I am updating to 1.9 over the weekend.

One question is that when patching games with the new ap2.5 patches do we need clean images of the games or can we just repatch the previous image that was patched for the old ap2.5 challenges ?

yes you can patch the images once you read the disc onto your hd. abgx will patch them to the new ap2.5 challenges

Shintax909 · « **Reply #111 on:** June 25, 2011, 04:05:00 PM »

this question is for anyone that has had a bad dvd drive and replaced it with a benq. i had a liteon7x and replaced it with a benq from a rrod xbox. is it safe to flash the liteon fw to the benq and update? if so, has anyone successfully updated and reflashed while not being flagged for a ban?

360ballin · « **Reply #112 on:** July 03, 2011, 04:32:00 PM »

OK, I have a BENQ, it was latest lt before 1.9. I downloaded update w/o flashing back to stock 1st. I know i should have flashed to stock 1st, but when the update prompt came up, i somehow clicked yes, and didnt wanna turn it off to mess anything up.

so anyways, i plug up the drive to my computer to flash to lt1.9, hit benq unlock, read FW, but when I save it, the log shows:Dumped in 9333mS

Benq Dump file saved to BENQ-OFW2.bin
Loading firmware from buffer
Parse Failed !

Loading MTK_Flash source file

then when i try to load it as source, i get:Parse Failed !

Loading MTK_Flash source file
Loading firmware file C:\Documents and Settings\user\Desktop\BenQ iXtreme LT Plus v1.9\BenQ_Post_13141\OFW\BENQ-OFW2.bin
MD5 hash: 8b67d18052506f39255803814774af57
Parse Failed !

I also still have the original FW from the 1st time i flashed it, i can load that as source, and 1.9 as target, is it safe to use that?

This post has been edited by 360ballin: Jul 3 2011, 11:34 PM

driftfox · « **Reply #113 on:** July 04, 2011, 11:02:00 AM »

QUOTE(360ballin @ Jul 3 2011, 11:32 PM)

I also still have the original FW from the 1st time i flashed it, i can load that as source, and 1.9 as target, is it safe to use that?

That should work just fine. (See my previous post in this thread for why I'm saying this.)

hnk · « **Reply #114 on:** July 11, 2011, 03:13:00 AM »

It might be a dumb question but need your help. My xbox updated to 13146 and cannot use my backups. I don't have the orginal dump or key as it was given to me by someone else. What are my options? Can I use the procedure to fix the issue. I have Benq drive. Apparecite your replies.

totoz · « **Reply #115 on:** July 11, 2011, 07:36:00 AM »

ask a modder to put LT 1.9 or if u want to try u have to "PMT" your drive.
see jungleflasher tutorial (pdf)

driftfox · « **Reply #116 on:** July 11, 2011, 08:45:00 PM »

QUOTE(hnk @ Jul 11 2011, 10:13 AM)

It might be a dumb question but need your help. My xbox updated to 13146 and cannot use my backups. I don't have the orginal dump or key as it was given to me by someone else. What are my options? Can I use the procedure to fix the issue. I have Benq drive. Apparecite your replies.

Yeah, this is no problem. Just follow the instructions in the JungleFlasher Tutorial (its a PDF file you can find online) or find someone in your area to do it for you.

hnk · « **Reply #117 on:** July 12, 2011, 02:02:00 AM »

Thanks totoz & driftfox for helpful replies. I will give it a try latter today.

spidey · « **Reply #118 on:** October 19, 2011, 11:25:00 PM »

You would be correct in assuming I do not know what i am doing, thanks for the reply though.
I have had no problem modding the ps2/3 xbox original and the wii but this one has me stumped .
I guess I will buy the USBpro .
but I do have a PC to work with , what is the native SATA connection , i am curious.
Thanks again

Author Topic: C4Eva iXtreme LT v1.9 for Samsung and LT+ v1.9 for Benq and phat Lite- (Read 1004 times)