Topic: C4Eva iXtreme LT v1.9 for Samsung and LT+ v1.9 for Benq and phat Lite- (Read 1002 times)

.:Dino:. · « **Reply #45 on:** June 15, 2011, 06:57:00 AM »

QUOTE

Is this safe since it doesn't copy any of the other data? Or is the other data not needed any longer?

From what i understand, the serial/barcode data is no longer present in the firmware the update writes, and so is no longer needed in the new firmware series. It was previously considered to be information left on from manufacturer, and true to this it seems it is not needed.

All you need then is the drive key, as 1.9 does not use calibration data, same as with the new ofw.
Hope that helps

omegastar · « **Reply #46 on:** June 15, 2011, 08:06:00 AM »

QUOTE(Slateboard @ Jun 15 2011, 01:32 AM)

Has the Lite-On 9504 Slim LT+ 1.9 come out yet?

QUOTE(ThaCrip @ Jun 15 2011, 01:55 AM)

Yes (for Liteon 9504 slim). it's all in the firmware pack i just downloaded.

p.s. i got a Samsung myself though. i might just wait for v2.0 since i probably won't need to get on live anytime soon anyways.

I dont believe it has if you look more closely at whats in the LiteOn (Slim) folder is only OFW in 0272 and 9504 and 9504 LTPlus1.1 not 1.9 all other folders are empty.

This post has been edited by omegastar: Jun 15 2011, 03:08 PM

mat1c · « **Reply #47 on:** June 15, 2011, 09:01:00 AM »

WackyBacky: after the newest dashboard update, all lite-on drives have the 025 firmware so there are no longer specifics (74850, etc etc). as far as the key, you should have it stored somewhere or simply redump it. jungleflasher's mtkflash tab might be looking for it in its previous spot and its no longer there (the dash update moves the key, remember?). so this shouldn't be anything to worry about if you've previously flashed it as the key should be in the keydb anyway.

This post has been edited by mat1c: Jun 15 2011, 04:03 PM

WackyBacky · « **Reply #48 on:** June 15, 2011, 09:03:00 AM »

QUOTE(mat1c @ Jun 15 2011, 04:01 PM)

WackyBacky: after the newest dashboard update, all lite-on drives have the 025 firmware so there are no longer specifics (74850, etc etc). as far as the key, you should have it stored somewhere or simply redump it. jungleflasher might be looking for it in a specific spot and its no longer there (the dash update moves the key, remember?).

Thanks man. I sorted the dvd key. for everyone having this problem go to DVDKey 32 tab and click Dummy from key DB, save all the files and your sweet! it now is verified

And thanks again mat1c, i was just about to shit myself!

Bleckshire · « **Reply #49 on:** June 15, 2011, 09:14:00 AM »

Flashed and working fine. It's great to be back on Live. Thanks C4Eva.

thor99 · « **Reply #50 on:** June 15, 2011, 09:26:00 AM »

QUOTE(Bleckshire @ Jun 15 2011, 04:14 PM)

Flashed and working fine. It's great to be back on Live. Thanks C4Eva.

I second that.. (IMG:style_emoticons/default/beerchug.gif)

astr4twin · « **Reply #51 on:** June 15, 2011, 10:30:00 AM »

Would anyone be so kind as to tell me which file i should use to flash back to stock on a Lite-On 748590C Drive please.

orig-74850C-1a000.bin
orig-74850C-1b000.bin
orig-74850C-1c000.bin
orig-74850C-1e000.bin

Just confused me a little when presented with the four choices.

Thank you in advance.

Edit: Figured it out now, just downloaded stock FW somewhere else which just had one file (IMG:style_emoticons/default/smile.gif)

This post has been edited by astr4twin: Jun 15 2011, 06:01 PM

xboxdawg · « **Reply #52 on:** June 15, 2011, 11:04:00 AM »

QUOTE(astr4twin @ Jun 15 2011, 05:30 PM)

Would anyone be so kind as to tell me which file i should use to flash back to stock on a Lite-On 748590C Drive please.

orig-74850C-1a000.bin
orig-74850C-1b000.bin
orig-74850C-1c000.bin
orig-74850C-1e000.bin

Just confused me a little when presented with the four choices.
Thank you in advance.

My best guess (and with the Benq it is clearer) is that it's based on the address of your key in your dummy.bin. Bring up dummy.bin as your source in Jungleflasher. Right above the key it should say: DVD Key @ A030 or something similar.

I am assuming if it's an A you use 1a000.bin. If it starts with B use 1b000.bin and so on.

If I have assumed wrong someone please correct me.

DMagic1 · « **Reply #53 on:** June 15, 2011, 11:06:00 AM »

No luck for me right now with xbins. Seems its getting hammered with people. I'll probably have to try later.

jamiebarrington · « **Reply #54 on:** June 15, 2011, 11:24:00 AM »

Hi people,

Im gunna flash my 93450C with LT+ 1.9 tonight, should i flash then accept update or accept the update then flash? as if i accepted the update first they would find out its modded an ban me right? aswell as re-flash my drive

Thanks, Jamie.

Hitokiri-Snake · « **Reply #55 on:** June 15, 2011, 11:50:00 AM »

QUOTE(jamiebarrington @ Jun 15 2011, 01:24 PM)

Hi people,
Im gunna flash my 93450C with LT+ 1.9 tonight, should i flash then accept update or accept the update then flash? as if i accepted the update first they would find out its modded an ban me right? aswell as re-flash my drive
Thanks, Jamie.

You have to flash after you update your dashboard. If you flashed your drive before, the update would just overwrite your firmware with stock firmware. If you have the ability to do so, I would flash back to stock before you update your dashboard just in case MS is checking firmwares. We don't believe that it's even possible to check the firmware of a liteon, but ya never know. It just seems safer to me.

jamiebarrington · « **Reply #56 on:** June 15, 2011, 12:21:00 PM »

QUOTE(Hitokiri-Snake @ Jun 15 2011, 06:50 PM)

You have to flash after you update your dashboard. If you flashed your drive before, the update would just overwrite your firmware with stock firmware. If you have the ability to do so, I would flash back to stock before you update your dashboard just in case MS is checking firmwares. We don't believe that it's even possible to check the firmware of a liteon, but ya never know. It just seems safer to me.

Thanks alot for that, only problem is i dont have my stock fw (IMG:style_emoticons/default/sad.gif) is this something that is downloadable somewhere?

CanuckGod · « **Reply #57 on:** June 15, 2011, 12:35:00 PM »

QUOTE(jamiebarrington @ Jun 15 2011, 12:21 PM)

Thanks alot for that, only problem is i dont have my stock fw (IMG:style_emoticons/default/sad.gif) is this something that is downloadable somewhere?

If you've found the firmware package, there should be a set of stock firmwares for your particular drive, all you need is the drive key from your modded firmware, and you can just spoof the stock firmware in JungleFlasher with your drive's key, then flash that to the drive, replace in your Xbox, run the dashboard update, then flash the drive with LT+ 1.9 and you should be good. Though it's doubtful MS detects your drive anyhow, better safe than sorry, that's how I did it with my Benq (LT+ 1.1>stock>upgrade>LT+ 1.9). Good luck!

This post has been edited by CanuckGod: Jun 15 2011, 07:38 PM

fredfunk · « **Reply #58 on:** June 15, 2011, 12:38:00 PM »

QUOTE(djgook @ Jun 15 2011, 02:37 AM)

So which Benq do I use? Post or Pre?? Whats the difference?

Which one is it then for Benq pre or post ?

This post has been edited by fredfunk: Jun 15 2011, 07:41 PM

CanuckGod · « **Reply #59 on:** June 15, 2011, 12:45:00 PM »

fredfunk (and other Benq drive owners):

If you haven't updated to the new dashboard yet, you'll want the pre-13141 firmware. If you already have upgraded, you'll want the post. Though if you haven't upgraded yet, your best bet is to use Jungleflasher and reflash your Benq to stock, using the OFW firmware in the firmware bundle under the pre-13141 directory, spoofing the drivekey from your modded firmware to the stock firmware, flash, then do the upgrade. You could always directly flash either pre-or-post dashboard upgrade to the 1.9 firmware, but the chances of MS detecting your firmware increase.

Author Topic: C4Eva iXtreme LT v1.9 for Samsung and LT+ v1.9 for Benq and phat Lite- (Read 1002 times)