Topic: Lt Plus 1.1 And Jungleflasher 0.1.77 Released (Read 547 times)

zyo · « **on:** December 12, 2010, 12:55:00 AM »

Lite-On LT + v1.1 support
Benq LT + v1.1 support

wonder what has changed

mod edit: news article added below

QUOTE

C4E released a new version of the iXtreme LT+ modified FW for ("phat") LiteOn (74850, 83850V1, 83850V2, 93450) and BenQ DVD-drives.

What's new/fixed:
- xbox 1 backup support (iXtreme compatible, DVD9 only)
- improved pfi support

There's also some WIP news about the LT+ FW for Hitachi-LG drives on team-xecuter.com:

QUOTE

Plus after much work and heavy testing, C4E has finished the LT+ for Hitachi 78 and 79 and it is confirmed that they now boot AP25 backups ! We are currently testing and hope to announce the official release shortly. There are also plans to make LT firmware for the older Hitachi drives but without Ap25 as its not required. LT+ for Slims is the priority at the moment. FYI iXtreme 1.51 still works just fine with AP25 (many are still using the older Hitachis on XBL however we cant guarantee that it is XBL safe so use at your own risk).

Official Site: n/a, by C4E
Download FW: n/a (might be illegal under DMCA/EUCD)

dazv6 · « **Reply #1 on:** December 12, 2010, 01:09:00 AM »

Official release of C4E's iXtreme LT+ v1.1
- Supports Benq and Liteon Drives (74850, 83850V1, 83850V2, 93450)
- xbox 1 backup support (iXtreme compatible, DVD9 only)
- improved pfi support

Geremia · « **Reply #2 on:** December 12, 2010, 05:37:00 AM »

QUOTE(dazv6 @ Dec 12 2010, 09:09 AM)

Official release of C4E's iXtreme LT+ v1.1
- Supports Benq and Liteon Drives (74850, 83850V1, 83850V2, 93450)
- xbox 1 backup support (iXtreme compatible, DVD9 only)
- improved pfi support

The changelog miss this:

- tryed to re-enable dvdkey over uart in 748 but still broken, need to check what the uartenable ppf patch does

dazv6 · « **Reply #3 on:** December 12, 2010, 06:33:00 AM »

Hitachi AP25 fw complete and is being tested now.

randalmorn · « **Reply #4 on:** December 12, 2010, 07:39:00 AM »

QUOTE(dazv6 @ Dec 12 2010, 10:09 AM)

- improved pfi support

what does it mean exactly?

Maximize · « **Reply #5 on:** December 12, 2010, 10:07:00 AM »

I dont see it on xbins?

gopalsingh · « **Reply #6 on:** December 12, 2010, 10:15:00 AM »

Link is in #fw on irc

A person on IRC said that 'improved pfi support' (improved Physical Format Information support) means the new firmware can handle low quality non-verb discs better, so you get less jitter and less disc read errors. But that was only what I was told on IRC so it could be an incorrect explanation...

This post has been edited by gopalsingh: Dec 12 2010, 06:34 PM

iateshaggy · « **Reply #7 on:** December 12, 2010, 10:38:00 AM »

great, so i don't "have" to update lt+

gopalsingh · « **Reply #8 on:** December 12, 2010, 10:48:00 AM »

QUOTE(iateshaggy @ Dec 12 2010, 05:38 PM)

great, so i don't "have" to update lt+

I think it is still recommended because apparently the 'Disc Jitter' is monitored by microsoft so they could use the information when banning people. But once again that is just what I have been told over IRC so not 100%

Evi1d33d · « **Reply #9 on:** December 12, 2010, 11:23:00 AM »

QUOTE(gopalsingh @ Dec 12 2010, 06:15 PM)

Link is in #fw on irc

A person on IRC said that 'improved pfi support' (improved Physical Format Information support) means the new firmware can handle low quality non-verb discs better, so you get less jitter and less disc read errors. But that was only what I was told on IRC so it could be an incorrect explanation...

I found this on another forum.

QUOTE

PFI Sector (Physical Format Information):
This sector is contained within the lead-in and contains information about its physical format. Disc booktype, start PSN and end PSN and Layerbreak are contained here. Currently all Xbox360 and Xbox1 games have the same PFI information, but that may change.
On Writable media (our backups), this also contains media specific information such as Media Code/Manufacturer ID and Media Product Revision number.
Any requestes for this information is now redirected to the the PFI sector now at $04FB1D (for Xbox 360 backups) or $0605FD (Xbox 1 backups), if it exists. If it does not exist (pre V3 backup) a seperate embedded PFI is used for Xbox 360 and Xbox 1.

You should always update your firmware when a new version comes out.

QUOTE(gopalsingh @ Dec 12 2010, 06:48 PM)

I think it is still recommended because apparently the 'Disc Jitter' is monitored by microsoft so they could use the information when banning people. But once again that is just what I have been told over IRC so not 100%

I don't think that should be a problem because:
1) jitter can be caused by dying DVD drives or scratched and dirty discs. So M$ can't ban people on these bases alone, that'll end up banning a lot of people with old xboxes.

2) You can just use verbatim and install all your games on the harddrive. Which is something you should do anyway because burnt media will eventually wear down the laser.

Nerdz · « **Reply #10 on:** December 12, 2010, 01:02:00 PM »

I cant see the LT+ v1.1 in the xbins

Tobeme · « **Reply #11 on:** December 12, 2010, 02:06:00 PM »

my guess is if you go and play on live update ,if you don't care about live don't bother and stay with the LT+v1

Maximize · « **Reply #12 on:** December 12, 2010, 02:44:00 PM »

you should probably change the title to "unreleased"

UnrealEureca · « **Reply #13 on:** December 12, 2010, 02:56:00 PM »

What about Samsung?

Paperstack.1 · « **Reply #14 on:** December 12, 2010, 03:01:00 PM »

So Xbox Legacy games are supported again?
I can't help but think why, unless your console is no longer able to connect to Live, or you simply don't use Live at all.

Author Topic: Lt Plus 1.1 And Jungleflasher 0.1.77 Released (Read 547 times)