Topic: Benq & Lite-on Lt+ Released (Read 1825 times)

DARKFiB3R · « **on:** November 23, 2010, 01:47:00 PM »

BenQ & Lite-On LT+ link removed as it contains copyrighted code (check the usual places)

AP2.5 PATCHES @ http://bit.ly/hWm41u

CODE

Official release of C4E's iXtreme LT+
- Supports Benq and Liteon Drives (74850, 83850V1, 83850V2, 93450)
- Optimized PFI code to accommodate AP25 SS data
- Defeats current AP25 protection
- Protects console from logging AP25 violation
- Full disc stealth used by default
- Waveless booting, disc images are assumed to be correct!
- Split-Vid used as default

If booting an AP25 title without AP25 SS game will not boot but will still be protected from logging AP25 violation on current dash 2.0.12611.0
If LT+ encounters an unknown AP25 challenge, game will not boot but console will still be protected from logging AP25 violation on current dash 2.0.12611.0

AP25 SS are region specific for region locked games (Current Example NFS: Hot Pursuit is both PAL and NTSC - 2 different AP25 Patches)

If you boot the AP25 titles without LT+ you will probably be flagged for a ban.

You cannot spoof a different model drive as that can now be detected. With this release of LT+ you HAVE to have an original Benq or Liteon.

LT+ for slim 9504 is next followed by LT+ for slim 0225

Thanks go to Team Jungle for their hard work and efforts in the development process.
Thanks go to Team Xecuter for their generous support and input to this project.

You can download the current batch of AP25 Patches from http://www.team-xecuter.com/forums/showthread.php?t=58118

Thanks go’s out to C4eva, TeamJungle, TeamXecuter and anybody else involved. Never say Trevor.

(IMG:style_emoticons/default/smile.gif)

This post has been edited by Reaper527: Nov 23 2010, 10:00 PM

aur0n · « **Reply #1 on:** November 23, 2010, 01:56:00 PM »

I have a Samsung that doesn't boot AP2.5 games, so I'm wondering: is there any plan to release LT+ for Samsung too?

green360 · « **Reply #2 on:** November 23, 2010, 02:08:00 PM »

Thancks C4eva, TeamJungle, TeamXecuter and anybody else involved & thancks to xbox scene
here we go

or8it · « **Reply #3 on:** November 23, 2010, 02:22:00 PM »

Do you need an updated jungleflasher for this?

DARKFiB3R · « **Reply #4 on:** November 23, 2010, 02:24:00 PM »

QUOTE(or8it @ Nov 23 2010, 09:22 PM)

Do you need an updated jungleflasher for this?

Nope

"Current JF works fine, new in testing."

bigballs5 · « **Reply #5 on:** November 23, 2010, 02:28:00 PM »

Do you need to return flashed drives back to stock/original firmware? If so is there a guide to do this somewhere

Shintax909 · « **Reply #6 on:** November 23, 2010, 02:35:00 PM »

QUOTE

You cannot spoof a different model drive as that can now be detected. With this release of LT+ you HAVE to have an original Benq or Liteon.

Im assuming this means that if you do not have the original drive that came within the xbox, that it will not protect you from a ban?... I have a Benq that replaced my bad Liteon 748, am I screwed from playing N4S: HP online?

Andy_K · « **Reply #7 on:** November 23, 2010, 02:41:00 PM »

QUOTE(Shintax909 @ Nov 23 2010, 09:35 PM)

Im assuming this means that if you do not have the original drive that came within the xbox, that it will not protect you from a ban?... I have a Benq that replaced my bad Liteon 748, am I screwed from playing N4S: HP online?

I'm just pondering the same...although i'm hoping i'll get away with this...

I have and elite which came with a liteon 93450c... i then replaced it with an 83450c v1... wonder if the rule still applies as it's liteon to liteon?

Package · « **Reply #8 on:** November 23, 2010, 02:43:00 PM »

If you have ixtreme LT 1.1 on your lt you will need to do the MRA method to dump the key (even on 7xxx cause the probe wont work, you will get bad serial error)

Just to inform people

vegasmtv · « **Reply #9 on:** November 23, 2010, 02:45:00 PM »

QUOTE(Package @ Nov 23 2010, 09:43 PM)

If you have ixtreme LT 1.1 on your lt you will need to do the MRA method to dump the key (even on 7xxx cause the probe wont work, you will get bad serial error)

Just to inform people

Is that even if you have saved your key before flashing to lt 1.1???

I had a virgin drive, i saved dummy, so i have the drive key. Then flashed to lt 1.1.

aswilbourn · « **Reply #10 on:** November 23, 2010, 02:47:00 PM »

QUOTE(Package @ Nov 23 2010, 11:43 PM)

If you have ixtreme LT 1.1 on your lt you will need to do the MRA method to dump the key (even on 7xxx cause the probe wont work, you will get bad serial error)

Just to inform people

However if you used you head and saved a copy of the key when you originally flashed the drive you can just spoof to target in Jungleflasher.

Shintax909 · « **Reply #11 on:** November 23, 2010, 02:56:00 PM »

Just tried to play N4S:HP, wouldnt play, just stayed at a black screen, tried to exit to dashboard then froze... i patched the iso with the ap2.5 patch then ran it through abgx (PFI and Video partition does not match known data, stealth uncertain, failed verification) and burned using clonecd... Benq replaced Benq...

This post has been edited by Shintax909: Nov 23 2010, 11:04 PM

Package · « **Reply #12 on:** November 23, 2010, 03:01:00 PM »

QUOTE(aswilbourn @ Nov 23 2010, 10:47 PM)

However if you used you head and saved a copy of the key when you originally flashed the drive you can just spoof to target in Jungleflasher.

Of course

this is just for those people that flash for friends and stuff and maybe didnt saved all those keys

trident666 · « **Reply #13 on:** November 23, 2010, 03:06:00 PM »

Time to patch for an offline use and not stop loading none patched ap25 games
I have an old banned console I gave to the kids so dont care for ap25 flags ..

Zoneout · « **Reply #14 on:** November 23, 2010, 03:08:00 PM »

At last!

Author Topic: Benq & Lite-on Lt+ Released (Read 1825 times)