Topic: Boxxdr Method For 360 Slim Lite-on Pcb Swap (Read 245 times)

Tauhir · « **on:** October 12, 2013, 03:55:00 AM »

Sorry to revive a dead thread guys :/
I've searched all over the internet, and boxxdr.com is down so I can't get any of the images for this tut. I've got an rgh trinity, and a drive with a failed kamakaze. I have a few phat liteon drives, but it seems nearly impossible to fit the drive physically. I can use my drive with my box open, but its not aesthetically pleasing

. This seems to be the way to go

Can anybody give me some insight onto this method? Again, sorry for reviving an old thread, and if this isn't the way of the scene

, I'll gladly open a new thread.

Thanks for any help,
Tauhir

syntaxerror329 · « **Reply #1 on:** October 21, 2010, 10:35:00 PM »

So what do we do while we patiently wait for some iXtreme firmware for the new Lite-on DG-16D4S 360 Slim?
Well from the moment I heard we could get the key I had figured we could install a old lite-on 74850, 8xxxx or 9xxxx board.
What I didnt know was how much work it was to make it fit. So after hours of playing around I did my first conversion and took some great pictures to share with all.

Many thanks to Geremia for his work on the Tarablinda drive firmware dump program. Thanks to anyone else that might have helped him write this code.

Required materials:

1)   Original Xbox 360 Lite-on or Benq Laser
2)   Lite-on drive circuit board form original Xbox 360. Any version
3)   Lite-on laser ribbon cable
4)   Original Xbox 360 Drive power cable. (or extend the 360 slim cable, yay)
5)   Electrical tape and Packing tape
6)   A small screw. Take one out of a old Samsung drive if you got it
7)   Thermal pads. Re use the ones that came with the lite-on or cut some out from the memory chip pads found under most 360 motherboards

Required tools:

1)   Soldering iron
2)   Hot glue gun
3)   High speed rotary tool with cutter
4)   Side Cutters

Steps not shown in this tutorial. (if you cant figure them out then this probably isnt for you.

1)   360 Slim disassembly (have fun!! Be patient)
2)   How to dump your key using Tarablida
3)   How to make custom firmware.
4)   How to swap 360 slim laser to benq/original lite-on laser

View the full picture tutorial on boxxdr.com by clicking here

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap01.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap02.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap03.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap04.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap05.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap06.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap07.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap08.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap09.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap10.JPG)

Apparently I can't post more than 10 pictures in one thread. To be continued.... Sure wish i was a mod. hint hint

This post has been edited by syntaxerror329: Oct 22 2010, 05:49 AM

syntaxerror329 · « **Reply #2 on:** October 21, 2010, 11:04:00 PM »

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap11.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap12.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap13.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap14.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap15.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap16.JPG)

(IMG:http://www.boxxdr.com/360S_PCB_SWAP/360slimpcbswap17.JPG)

So, I am looking forward to any comments suggestions or questions! Please ask in this thread. No PM's for support please.

Dark Mod · « **Reply #3 on:** October 22, 2010, 01:27:00 AM »

Damn....it's like trying to fit an RB26 engine in a suzuki swift hatchback vehicle... (IMG:style_emoticons/default/biggrin.gif)
But I have a question that no one has answered, how to spoof the liteon board (any version) to the 9504 drive version?

This post has been edited by Dark Mod: Oct 22 2010, 08:33 AM

Tron[ADS] · « **Reply #4 on:** October 22, 2010, 05:14:00 AM »

Great work, thanks for sharing the pics.

Suicyde · « **Reply #5 on:** October 22, 2010, 06:28:00 AM »

Good work G - I've got a few of these coming over the weekend to do just that!

BigSteel · « **Reply #6 on:** October 22, 2010, 08:40:00 AM »

Geat work...for what it's worth I think you should be a mod too. Looks like a fair bit of work. I think by the time I do all that LT+ would be out

acid_rs · « **Reply #7 on:** October 24, 2010, 02:09:00 AM »

that is a one of the metod to flash the xbox360 slim, beter is when we change the drive , only to cut some plastic and metal, in that boxxdr metod you cut a one part from the xbox360 on the first foto,in tehe change drive metod you can back install the oryginal drive and make a soft mod.

syntaxerror329 · « **Reply #8 on:** October 24, 2010, 09:13:00 AM »

QUOTE(acid_rs @ Oct 24 2010, 04:09 AM)

that is a one of the metod to flash the xbox360 slim, beter is when we change the drive , only to cut some plastic and metal, in that boxxdr metod you cut a one part from the xbox360 on the first foto,in tehe change drive metod you can back install the oryginal drive and make a soft mod.

When a hack comes out for the slim drive it is very much possible to reinstall the original slim original dvd drive board.

Anyone that does my method or simply uses a differnt drive is bound to set off flags in the 360 that will probably result in a ban down the road. I had considered dumping the motherboard nand before i did this hack and then when a slim firmware came out i would have restored the nand first and removed any flags. I just didn't feel like spending the extra time because i know alot of people that would be happy to use this offline only.

acid_rs · « **Reply #9 on:** October 24, 2010, 01:50:00 PM »

QUOTE(syntaxerror329 @ Oct 24 2010, 04:13 PM)

When a hack comes out for the slim drive it is very much possible to reinstall the original slim original dvd drive board.

Anyone that does my method or simply uses a differnt drive is bound to set off flags in the 360 that will probably result in a ban down the road. I had considered dumping the motherboard nand before i did this hack and then when a slim firmware came out i would have restored the nand first and removed any flags. I just didn't feel like spending the extra time because i know alot of people that would be happy to use this offline only.

you cut the dvd bracket and cat the all parts of the oryginal drive, if you change the drive to liteon v1 v2 v3 ,any time can change to the old not destroyed drive. I change the drive ,i must only cut the metal,ant some plastic. i make some fotos andmakea tutorial witch my metod

SU

ZerOneX · « **Reply #10 on:** October 24, 2010, 06:27:00 PM »

Nice work man!!! Congrats

VanydotK · « **Reply #11 on:** October 24, 2010, 09:10:00 PM »

Very nice! I think it's safe to say this is NOT xbox live safe.

ddxcb · « **Reply #12 on:** October 24, 2010, 09:16:00 PM »

QUOTE(VanydotK @ Oct 24 2010, 08:10 PM)

Very nice! I think it's safe to say this is NOT xbox live safe.

yep agreed as even LT+ isnt 100% possitive live safe.

Brooshop · « **Reply #13 on:** October 25, 2010, 07:02:00 PM »

because not many people are using this method its probly as safe as any other drive lol especially if it runs LT.

cilo911 · « **Reply #14 on:** October 25, 2010, 09:02:00 PM »

QUOTE(Dark Mod @ Oct 22 2010, 03:27 AM)

Damn....it's like trying to fit an RB26 engine in a suzuki swift hatchback vehicle...

But I have a question that no one has answered, how to spoof the liteon board (any version) to the 9504 drive version?

no spoofing just flash the 9 series with what ever drive ur using

Author Topic: Boxxdr Method For 360 Slim Lite-on Pcb Swap (Read 245 times)