xboxscene.org forums

Author Topic: 93450c After Erase  (Read 87 times)

slayer86ca

  • Archived User
  • Newbie
  • *
  • Posts: 9
93450c After Erase
« on: August 15, 2010, 11:04:00 AM »
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name:  Unknown type
Flash Size:  n/a

do I need to press intro and cycle power ?
Logged

Dark Mod

  • Archived User
  • Sr. Member
  • *
  • Posts: 259
93450c After Erase
« Reply #1 on: August 15, 2010, 11:11:00 AM »
turn off drive then press intro then turn on drive and you will get the vendor mode kicked in
Logged

slayer86ca

  • Archived User
  • Newbie
  • *
  • Posts: 9
93450c After Erase
« Reply #2 on: August 15, 2010, 11:15:00 AM »
I am back into vendor mode I think under flash chip properties I see 0x72 , but my vendor id  says 0xc2, device id 0x11, nothing under name in drive properties, or f/w , i guess that is becuase i erased it, and no key either.
do I write now?
Logged

JuliVerHJ

  • Archived User
  • Newbie
  • *
  • Posts: 44
93450c After Erase
« Reply #3 on: August 15, 2010, 12:17:00 PM »
Yes...
you erased the drive,theres nothing there what you expect him to show...
click Write.
Logged

Dark Mod

  • Archived User
  • Sr. Member
  • *
  • Posts: 259
93450c After Erase
« Reply #4 on: August 15, 2010, 01:05:00 PM »
the firmware will not write UNLESS the identification chip reveals the vendor name MXIC
Logged

PandaNL

  • Archived User
  • Newbie
  • *
  • Posts: 7
93450c After Erase
« Reply #5 on: February 03, 2020, 03:08:00 AM »
Just try the info again and again, some drives i do kick in the first time and some kick in after 10 tries.
Logged

iateshaggy

  • Archived User
  • Hero Member
  • *
  • Posts: 906
93450c After Erase
« Reply #6 on: February 03, 2020, 04:11:00 AM »
did you erase the drive and not get the firmware?  also, if you intro and don't get flash chip properties, just hit intro again.
Logged